Problel Remove frp samsung s7 (SM-G930F) [Solved] - GSM-Forum

sailv · 05-30-2017, 16:38

Hi everyone, I have a problem with the octopus box. When I try to remove the block FRP, the phone writes the boot files and then remains locked in the samsung written.

"Platform: Samsung Android
Selected port: COM37
Selected model: SM-G930F
Connecting to server...
Connecting to server...Ok!
Checking resource files...
Resource files already downloaded.
Please put the phone into Download Mode and connect USB cable.
To put SM-G930F into Download Mode, You have to perform the following steps:
1. Press and hold "Volume-" + "Home" + "Power ON" keys.
2. When phone turns on, press "Volume+" key.
Waiting for phone...
Firmware write started.
Writing Boot section...
Boot section has been written successfully.
Searching for a phone. Please wait..."

It does not go on at the phone remains locked in the samsung written.
I apologize for my low English, I write with a translator, I'm Italian.

Hope you help me, thank you in advance

allumts · 05-30-2017, 19:30

Hello, you are Italian, read you pm please!!!!

Octopus box · 05-31-2017, 07:37

Hello.

If phone stuck on Samsung logo after writing of Boot section - boot.img that is being written to enable ADB is not comaptible with current firmware of the phone. You can try to write older by release date firmware, then repeat "Reset FRP/Reactivation/EE" operation.

sailv · 05-31-2017, 08:34

Thank you for the reply. The problem is the firmware? Do I have to install an old firmware 6.0.1?

Octopus box · 05-31-2017, 08:44

Yes, the problem is in firmware. If phone has Android 7 firmware - You can try to downgrade it to Android 6.x.

sailv · 05-31-2017, 17:36

Quote:

Originally Posted by Octopus box

Yes, the problem is in firmware. If phone has Android 7 firmware - You can try to downgrade it to Android 6.x.

I tried different firmware 6.x. , I always have the same problem. because? I'm going crazy

allumts · 05-31-2017, 17:52

Quote:

Originally Posted by sailv

I tried different firmware 6.x. , I always have the same problem. because? I'm going crazy

Of course you are crazyng, seem easy remove FRP from S7...but only Seem

cristianoloco · 05-31-2017, 22:22

I have the same problem. I would like to use the FRP service but it is off line

cristianoloco · 06-01-2017, 12:47

Ok Solved my FRP with @allumts in one min.

05-30-2017, 16:38	#1 (permalink)
sailv Junior Member Join Date: May 2017 Location: Italia, Puglia Posts: 3 Member: 2722365 Status: Offline Thanks Meter: 0	Problel Remove frp samsung s7 (SM-G930F) [Solved] Hi everyone, I have a problem with the octopus box. When I try to remove the block FRP, the phone writes the boot files and then remains locked in the samsung written. "Platform: Samsung Android Selected port: COM37 Selected model: SM-G930F Connecting to server... Connecting to server...Ok! Checking resource files... Resource files already downloaded. Please put the phone into Download Mode and connect USB cable. To put SM-G930F into Download Mode, You have to perform the following steps: 1. Press and hold "Volume-" + "Home" + "Power ON" keys. 2. When phone turns on, press "Volume+" key. Waiting for phone... Firmware write started. Writing Boot section... Boot section has been written successfully. Searching for a phone. Please wait..." It does not go on at the phone remains locked in the samsung written. I apologize for my low English, I write with a translator, I'm Italian. Hope you help me, thank you in advance Last edited by Octopus box; 06-01-2017 at 13:39.

05-30-2017, 19:30	#2 (permalink)
allumts No Life Poster Join Date: Apr 2011 Age: 58 Posts: 16,408 Member: 1564612 Status: Offline Thanks Meter: 12,343	Hello, you are Italian, read you pm please!!!!

05-31-2017, 07:37	#3 (permalink)
Octopus box Product Supporter Join Date: Oct 2009 Location: Romania, Bucharest Posts: 99,841 Member: 1146942 Status: Offline Sonork: 100.1587278 Thanks Meter: 27,411	Hello. If phone stuck on Samsung logo after writing of Boot section - boot.img that is being written to enable ADB is not comaptible with current firmware of the phone. You can try to write older by release date firmware, then repeat "Reset FRP/Reactivation/EE" operation.

05-31-2017, 08:34	#4 (permalink)
sailv Junior Member Join Date: May 2017 Location: Italia, Puglia Posts: 3 Member: 2722365 Status: Offline Thanks Meter: 0	Thank you for the reply. The problem is the firmware? Do I have to install an old firmware 6.0.1?

05-31-2017, 08:44	#5 (permalink)
Octopus box Product Supporter Join Date: Oct 2009 Location: Romania, Bucharest Posts: 99,841 Member: 1146942 Status: Offline Sonork: 100.1587278 Thanks Meter: 27,411	Yes, the problem is in firmware. If phone has Android 7 firmware - You can try to downgrade it to Android 6.x.

05-31-2017, 22:22	#8 (permalink)
cristianoloco Junior Member Join Date: Oct 2013 Location: Italia Posts: 13 Member: 2040043 Status: Offline Thanks Meter: 2	I have the same problem. I would like to use the FRP service but it is off line

06-01-2017, 12:47	#9 (permalink)
cristianoloco Junior Member Join Date: Oct 2013 Location: Italia Posts: 13 Member: 2040043 Status: Offline Thanks Meter: 2	Ok Solved my FRP with @allumts in one min.