samsung i9305 imei repair issue please help. [Solved] - GSM-Forum

JINDALGSM™ · 05-12-2013, 01:31

i have samsung i9305 for imei repair(imei show 0/00) i have follow all instructions
but no luck please help octopus box team.

THANKS..

Octopus box · 05-12-2013, 11:05

Hello.
Make Repair EFS and then Repair IMEI and post the result here.

JINDALGSM™ · 05-12-2013, 11:45

Welcome to Octopus Box Samsung software version 1.9.2
-----------------------------------------------------------------------------------
To connect GT-I9305 phone you have to perform the following steps:
1. Disconnect USB cable from phone.
2. Go to Menu->Settings->Developer options.
3. Turn on "USB Debugging" option.
4. When message is appear press "Yes".
5. Go to dial window.
6. Enter "*#7284#" number.
7. Set "USB" radio button to "MODEM" value.
8. Go to "Qualcomm USB Settings".
9. Select "RNDIS+DM+MODEM".
10. Enter "*#9090#" number.
11. Select DM/DUM over HS-USB.
12. Close window.
13. Go to dial window.
14. Press "Read Info" in software.
-----------------------------------------------------------------------------------
Platform: Samsung Android
Selected port: COM7
Selected model: GT-I9305
To put GT-I9305 phone into download mode you have to perform the
following steps:
1. Reconnect phone battery.
2. Press and hold "Volume - " + "Home" + "Power" buttons.
3. When phone turns on press "Volume+" button.
Repairing EFS...
Searching for a phone. Please wait...
EFS Repair successfully
-----------------------------------------------------------------------------------
Platform: Samsung Android
Selected port: COM99
Selected model: GT-I9305
Mode: Normal
Phone model: ACEFWMAZ
Phone model is not supported
Phone was not found on the selected port!
Searching for USB diagnostic port...
Connecting to phone on COM98
Mode: Emergency
Write IMEI failed
-----------------------------------------------------------------------------------
To connect GT-I9305 phone you have to perform the following steps:
1. Disconnect USB cable from phone.
2. Go to Menu->Settings->Developer options.
3. Turn on "USB Debugging" option.
4. When message is appear press "Yes".
5. Go to dial window.
6. Enter "*#7284#" number.
7. Set "USB" radio button to "MODEM" value.
8. Go to "Qualcomm USB Settings".
9. Select "RNDIS+DM+MODEM".
10. Enter "*#9090#" number.
11. Select DM/DUM over HS-USB.
12. Close window.
13. Go to dial window.
14. Press "Read Info" in software.
-----------------------------------------------------------------------------------
Platform: Samsung Android
Selected port: COM99
Selected model: GT-I9305
Mode: Normal
Phone model: ACEFWMAZ
Phone model is not supported
Phone was not found on the selected port!
Searching for USB diagnostic port...
Connecting to phone on COM98
Mode: Emergency
-----------------------------------------------------------------------------------
To connect GT-I9305 phone you have to perform the following steps:
1. Disconnect USB cable from phone.
2. Go to Menu->Settings->Developer options.
3. Turn on "USB Debugging" option.
4. When message is appear press "Yes".
5. Go to dial window.
6. Enter "*#7284#" number.
7. Set "USB" radio button to "MODEM" value.
8. Go to "Qualcomm USB Settings".
9. Select "RNDIS+DM+MODEM".
10. Enter "*#9090#" number.
11. Select DM/DUM over HS-USB.
12. Close window.
13. Go to dial window.
14. Press "Read Info" in software.
-----------------------------------------------------------------------------------
Platform: Samsung Android
Selected port: COM46
Selected model: GT-I9305
Mode: Emergency
Write IMEI failed
-----------------------------------------------------------------------------------
Platform: Samsung Android
Selected port: COM46
Selected model: GT-I9305
Mode: Emergency
Write IMEI failed

please help

Octopus box · 05-13-2013, 08:20

Please select proper COM port, select (check) "Manual select." option and make Repair NVM and then make Repair IMEI. Post here full software log.

JINDALGSM™ · 05-13-2013, 10:24

Quote:

Originally Posted by Octopus box

Please select proper COM port, select (check) "Manual select." option and make Repair NVM and then make Repair IMEI. Post here full software log.

problem solved

Welcome to Octopus Box Samsung software version 1.9.2
-----------------------------------------------------------------------------------
To connect GT-I9305 phone you have to perform the following steps:
1. Disconnect USB cable from phone.
2. Go to Menu->Settings->Developer options.
3. Turn on "USB Debugging" option.
4. When message is appear press "Yes".
5. Go to dial window.
6. Enter "*#7284#" number.
7. Set "USB" radio button to "MODEM" value.
8. Go to "Qualcomm USB Settings".
9. Select "RNDIS+DM+MODEM".
10. Enter "*#9090#" number.
11. Select DM/DUM over HS-USB.
12. Close window.
13. Go to dial window.
14. Press "Read Info" in software.
-----------------------------------------------------------------------------------
Platform: Samsung Android
Selected port: COM99
Selected model: GT-I9305
Phone was not found on the selected port!
Selected action can’t be performed
-----------------------------------------------------------------------------------
Platform: Samsung Android
Selected port: COM98
Selected model: GT-I9305
Phone was not found on the selected port!
Selected action can’t be performed
-----------------------------------------------------------------------------------
Platform: Samsung Android
Selected port: COM46
Selected model: GT-I9305
Phone was not found on the selected port!
Selected action can’t be performed
-----------------------------------------------------------------------------------
Platform: Samsung Android
Selected port: COM46
Selected model: GT-I9305
Phone was not found on the selected port!
Selected action can’t be performed
-----------------------------------------------------------------------------------
Platform: Samsung Android
Selected port: COM98
Selected model: GT-I9305
Phone was not found on the selected port!
Selected action can’t be performed
-----------------------------------------------------------------------------------
Platform: Samsung Android
Selected port: COM99
Selected model: GT-I9305
Phone was not found on the selected port!
Selected action can’t be performed
-----------------------------------------------------------------------------------
Platform: Samsung Android
Selected port: COM99
Selected model: GT-I9305
Phone was not found on the selected port!
Selected action can’t be performed
-----------------------------------------------------------------------------------
Platform: Samsung Android
Selected port: COM98
Selected model: GT-I9305
Phone was not found on the selected port!
Selected action can’t be performed
-----------------------------------------------------------------------------------
Platform: Samsung Android
Selected port: COM46
Selected model: GT-I9305
Mode: Normal
Phone model:
Warning: Selected model (GT-I9305) differs from the detected one ()!
Firmware compiled date:
Firmware compiled time:
Firmware released date: d
Firmware released time:
Incorrect IMEI
SW Version: M9615ACEHWMAZD179535
Creating NVM backup
Reading NVM done!
Repairing NVM for GT-I9305 phone...
NVM repair completed successfully
Please, restart the phone to apply changes
-----------------------------------------------------------------------------------
Platform: Samsung Android
Selected port: COM46
Selected model: GT-I9305
Mode: Normal
Phone model: ACEFWMAZ
Warning: Selected model (GT-I9305) differs from the detected one
(ACEFWMAZ)!
Firmware compiled date: Sep 07 2012
Firmware compiled time: 15:00:00
Firmware released date: Sep 24 2012
Firmware released time: 09:38:16
SW Version: M9615ACEHWMAZD179535
Old IMEI: 004400-15-202000-0
New IMEI: 350xxx-xx-xxxxxx-x
New IMEI successfully written.
Please, restart the phone to apply changes

thanks to octopus support team

BR
jindalgsm

05-12-2013, 01:31	#1 (permalink)
JINDALGSM™ No Life Poster Join Date: Mar 2007 Location: punjab(india) Age: 45 Posts: 1,243 Member: 467045 Status: Offline Sonork: 100.1603919 Thanks Meter: 1,705	samsung i9305 imei repair issue please help. [Solved] i have samsung i9305 for imei repair(imei show 0/00) i have follow all instructions but no luck please help octopus box team. THANKS.. Last edited by Octopus box; 05-13-2013 at 10:35.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

05-12-2013, 11:05	#2 (permalink)
Octopus box Product Supporter Join Date: Oct 2009 Location: Romania, Bucharest Posts: 99,802 Member: 1146942 Status: Offline Sonork: 100.1587278 Thanks Meter: 27,406	Hello. Make Repair EFS and then Repair IMEI and post the result here.

05-12-2013, 11:45	#3 (permalink)
JINDALGSM™ No Life Poster Join Date: Mar 2007 Location: punjab(india) Age: 45 Posts: 1,243 Member: 467045 Status: Offline Sonork: 100.1603919 Thanks Meter: 1,705	Welcome to Octopus Box Samsung software version 1.9.2 ----------------------------------------------------------------------------------- To connect GT-I9305 phone you have to perform the following steps: 1. Disconnect USB cable from phone. 2. Go to Menu->Settings->Developer options. 3. Turn on "USB Debugging" option. 4. When message is appear press "Yes". 5. Go to dial window. 6. Enter "#7284#" number. 7. Set "USB" radio button to "MODEM" value. 8. Go to "Qualcomm USB Settings". 9. Select "RNDIS+DM+MODEM". 10. Enter "#9090#" number. 11. Select DM/DUM over HS-USB. 12. Close window. 13. Go to dial window. 14. Press "Read Info" in software. ----------------------------------------------------------------------------------- Platform: Samsung Android Selected port: COM7 Selected model: GT-I9305 To put GT-I9305 phone into download mode you have to perform the following steps: 1. Reconnect phone battery. 2. Press and hold "Volume - " + "Home" + "Power" buttons. 3. When phone turns on press "Volume+" button. Repairing EFS... Searching for a phone. Please wait... EFS Repair successfully ----------------------------------------------------------------------------------- Platform: Samsung Android Selected port: COM99 Selected model: GT-I9305 Mode: Normal Phone model: ACEFWMAZ Phone model is not supported Phone was not found on the selected port! Searching for USB diagnostic port... Connecting to phone on COM98 Mode: Emergency Write IMEI failed ----------------------------------------------------------------------------------- To connect GT-I9305 phone you have to perform the following steps: 1. Disconnect USB cable from phone. 2. Go to Menu->Settings->Developer options. 3. Turn on "USB Debugging" option. 4. When message is appear press "Yes". 5. Go to dial window. 6. Enter "#7284#" number. 7. Set "USB" radio button to "MODEM" value. 8. Go to "Qualcomm USB Settings". 9. Select "RNDIS+DM+MODEM". 10. Enter "#9090#" number. 11. Select DM/DUM over HS-USB. 12. Close window. 13. Go to dial window. 14. Press "Read Info" in software. ----------------------------------------------------------------------------------- Platform: Samsung Android Selected port: COM99 Selected model: GT-I9305 Mode: Normal Phone model: ACEFWMAZ Phone model is not supported Phone was not found on the selected port! Searching for USB diagnostic port... Connecting to phone on COM98 Mode: Emergency ----------------------------------------------------------------------------------- To connect GT-I9305 phone you have to perform the following steps: 1. Disconnect USB cable from phone. 2. Go to Menu->Settings->Developer options. 3. Turn on "USB Debugging" option. 4. When message is appear press "Yes". 5. Go to dial window. 6. Enter "#7284#" number. 7. Set "USB" radio button to "MODEM" value. 8. Go to "Qualcomm USB Settings". 9. Select "RNDIS+DM+MODEM". 10. Enter "#9090#" number. 11. Select DM/DUM over HS-USB. 12. Close window. 13. Go to dial window. 14. Press "Read Info" in software. ----------------------------------------------------------------------------------- Platform: Samsung Android Selected port: COM46 Selected model: GT-I9305 Mode: Emergency Write IMEI failed ----------------------------------------------------------------------------------- Platform: Samsung Android Selected port: COM46 Selected model: GT-I9305 Mode: Emergency Write IMEI failed please help

05-13-2013, 08:20	#4 (permalink)
Octopus box Product Supporter Join Date: Oct 2009 Location: Romania, Bucharest Posts: 99,802 Member: 1146942 Status: Offline Sonork: 100.1587278 Thanks Meter: 27,406	Please select proper COM port, select (check) "Manual select." option and make Repair NVM and then make Repair IMEI. Post here full software log.