Samsung i9505 3G 4G Repair with ***** Octoplus Box***** - GSM-Forum

zulfqarali · 03-01-2017, 18:49

Samsung i9505 3G 4G Repair with

***** Octoplus Box*****

BR.

Octopus box · 03-02-2017, 10:34

Thanks for good report.

BxS4ever · 05-24-2017, 16:47

Hello.

I have here another Galaxy S4 wihch works fine except network 3g/4g. When I press the repair button, It will not proceed as the phone is in emegency mode. Typing *#0808# and changing mtp+adb in dm+modem+adb my pc will not recognize the phone's com port. I have root permission access + debug usb enabled. Here's the log with the read info:

Welcome to Octoplus/Octopus Box Samsung software version 2.5.4
-----------------------------------------------------------------------------------
-----------------------------------------------------------------------------------
To connect GT-I9505 phone you have to perform the following steps:
1. Disconnect USB cable from phone.
2. Go to Menu->Settings->More->About Device.
3.Tap on "Build number" 7 times to enable developer options.
4. Go to Menu->Settings->More->Developer options.
5. Turn on "USB Debugging" option.
6. Go to dial window.
7. Enter "*#0808#" number.
8. Select "DM+Modem+ADB".
9. Press Home button.
10. Restart phone.
11. Press "Read Info" in software.
-----------------------------------------------------------------------------------
Platform: Samsung Android
Selected port: COM20
Selected model: GT-I9505
Mode: Emergency
Performed by 2.5.4 Software version.
-----------------------------------------------------------------------------------
Platform: Samsung Android
Selected port: COM20
Selected model: GT-I9505
Reading info, please wait...
Detected phone model: GT-I9505
Firmware compiled date: Thu Oct 8 19:34:21 KST 2015
PDA version: I9505XXUHOJ2
CSC version: I9505AUTHOJ1
SW version: I9505XXUHOJ2
Phone SN: RF8DC0N19JM
Android version: 5.0.1 (LRX22C)
Sales code: AUT
Country: Switzerland
HW platform: msm8960
HW Chip: apq8064
HW Modem: MDM9215M
SIM 1 status: absent
Codename: jfltexx
Performed by 2.5.4 Software version.
-----------------------------------------------------------------------------------
Platform: Samsung Android
Selected port: COM20
Selected model: GT-I9505
Mode: Emergency
Performed by 2.5.4 Software version.

Octopus box · 05-25-2017, 07:28

If phone is not being detected by PC after You select "dm+modem+adb" connection type - You need to enable CP logging in Recovery Mode.

BxS4ever · 05-26-2017, 01:00

Quote:

Originally Posted by Octopus box

If phone is not being detected by PC after You select "dm+modem+adb" connection type - You need to enable CP logging in Recovery Mode.

Ok thanks for the info but now I have nvm write fail, what does it mean and what to do now?

-----------------------------------------------------------------------------------
Platform: Samsung Android
Selected port: COM26
Selected model: GT-I9505
Mode: Normal
Phone model: GT-I9505
Firmware compiled date:
Firmware compiled time:
Firmware released date: -ù~
Firmware released time:
SW version:
Repairing 3G/4G...
Reading nv...
Backup saved as C:\Program Files (x86)\Octoplus\Octoplus_Samsung
\BACKUP\NV-GT-I9505-26-05-2017_01-52-08-.nv file
Writing NVM failed
3G/4G repair successfully
To finish the operation, please restart the phone via phone's menu.
Performed by 2.5.4 Software version.

Octopus box · 05-26-2017, 07:30

Try to perform "Read Info" operation on different COM ports, with enabled "Manual select" option. When phone's info will be read correctly - perform "Repair 3G/4G" operation again.

BxS4ever · 05-26-2017, 13:34

Quote:

Originally Posted by Octopus box

Try to perform "Read Info" operation on different COM ports, with enabled "Manual select" option. When phone's info will be read correctly - perform "Repair 3G/4G" operation again.

Tried all ports with manual select option, only port 26 works but shows blank information:

Code:

Welcome to Octoplus/Octopus Box Samsung software version 2.5.4
-----------------------------------------------------------------------------------
To connect GT-I9505 phone you have to perform the following steps:
1. Disconnect USB cable from phone. 
2. Go to Menu->Settings->More->About Device.
3.Tap on "Build number" 7 times to enable developer options.
4. Go to Menu->Settings->More->Developer options.
5. Turn on "USB Debugging" option.
6. Go to dial window.
7. Enter "*#0808#" number.
8. Select "DM+Modem+ADB".
9. Press Home button.
10. Restart phone.
11. Press "Read Info" in software.
-----------------------------------------------------------------------------------
Platform: Samsung Android
Selected port: COM12
Selected model: GT-I9505
Phone was not found on the selected port!
Performed by 2.5.4 Software version.
-----------------------------------------------------------------------------------
Platform: Samsung Android
Selected port: COM26
Selected model: GT-I9505
Mode: Normal
Phone model: GT-I9505
Firmware compiled date: 
Firmware compiled time: 
Firmware released date: -ù~
Firmware released time: 
SW version: 
Performed by 2.5.4 Software version.
-----------------------------------------------------------------------------------
Platform: Samsung Android
Selected port: COM27
Selected model: GT-I9505
Phone was not found on the selected port!
Performed by 2.5.4 Software version.
-----------------------------------------------------------------------------------
Platform: Samsung Android
Selected port: COM28
Selected model: GT-I9505
Phone was not found on the selected port!
Performed by 2.5.4 Software version.
-----------------------------------------------------------------------------------
Platform: Samsung Android
Selected port: COM1
Selected model: GT-I9505
Port is busy
Phone was not found on the selected port!
Performed by 2.5.4 Software version.

Octopus box · 05-26-2017, 14:20

Try to make "Enable DIAG" as for SM-A300F, then try to read phone's info again.

BxS4ever · 05-26-2017, 16:48

Enable Diag operation ok. When reading info under the repair tab with both I9505 and A300F selected, I have only empty information. Reading info under Android/EFS tab, seems all correct.

Code:

Welcome to Octoplus/Octopus Box Samsung software version 2.5.4
-----------------------------------------------------------------------------------
To connect GT-I9505 phone you have to perform the following steps:
1. Disconnect USB cable from phone. 
2. Go to Menu->Settings->More->About Device.
3.Tap on "Build number" 7 times to enable developer options.
4. Go to Menu->Settings->More->Developer options.
5. Turn on "USB Debugging" option.
6. Go to dial window.
7. Enter "*#0808#" number.
8. Select "DM+Modem+ADB".
9. Press Home button.
10. Restart phone.
11. Press "Read Info" in software.
-----------------------------------------------------------------------------------
To connect SM-A300F phone you have to perform the following steps:
1. Disconnect USB cable from phone. 
2. Go to Menu->Settings->More->About Device.
3.Tap on "Build number" 7 times to enable developer options.
4. Go to Menu->Settings->More->Developer options.
5. Turn on "USB Debugging" option.
6. Go to dial window.
7. Enter "*#0808#" number.
8. Select "DM+Modem+ADB".
9. Press Home button.
10. Press "Read Info" in software.
-----------------------------------------------------------------------------------
Platform: Samsung Android
Selected port: COM26
Selected model: SM-A300F
Please, press "OK" button on the phone to allow USB debugging..
Please, press "OK" button on the phone to allow USB debugging..
Warning: Selected model (SM-A300F) differs from the detected one 
(GT-I9505)!
If you want select (GT-I9505) as (SM-A300F) model, please check 
"manual select".
Operation was failed!
Performed by 2.5.4 Software version.
-----------------------------------------------------------------------------------
Platform: Samsung Android
Selected port: COM26
Selected model: SM-A300F
Detected phone model: GT-I9505
Firmware compiled date: Wed Nov 16 19:12:05 KST 2016
PDA version: I9505XXUHPK2
CSC version: I9505ITVHPL1
SW version: I9505XXUHPK2
Phone SN: RF8DC0N19JM
Android version: 5.0.1 (LRX22C)
Sales code: ITV
Country: ITALY
HW platform: msm8960
HW Chip: apq8064
HW Modem: MDM9215M
Security patch level: 2016-11-01
SIM 1 status: absent
Codename: jfltexx
Updating DIAG confing...
DIAG confing is succesfully enabled.
Performed by 2.5.4 Software version.
-----------------------------------------------------------------------------------
To connect GT-I9505 phone you have to perform the following steps:
1. Disconnect USB cable from phone. 
2. Go to Menu->Settings->More->About Device.
3.Tap on "Build number" 7 times to enable developer options.
4. Go to Menu->Settings->More->Developer options.
5. Turn on "USB Debugging" option.
6. Go to dial window.
7. Enter "*#0808#" number.
8. Select "DM+Modem+ADB".
9. Press Home button.
10. Restart phone.
11. Press "Read Info" in software.
-----------------------------------------------------------------------------------
Platform: Samsung Android
Selected port: COM26
Selected model: GT-I9505
Mode: Normal
Phone model: GT-I9505
Firmware compiled date: 
Firmware compiled time: 
Firmware released date: -ù~
Firmware released time: 
SW version: 
Performed by 2.5.4 Software version.
-----------------------------------------------------------------------------------
To connect SM-A300F phone you have to perform the following steps:
1. Disconnect USB cable from phone. 
2. Go to Menu->Settings->More->About Device.
3.Tap on "Build number" 7 times to enable developer options.
4. Go to Menu->Settings->More->Developer options.
5. Turn on "USB Debugging" option.
6. Go to dial window.
7. Enter "*#0808#" number.
8. Select "DM+Modem+ADB".
9. Press Home button.
10. Press "Read Info" in software.
-----------------------------------------------------------------------------------
Platform: Samsung Android
Selected port: COM26
Selected model: SM-A300F
Mode: Normal
Phone model: SM-A300F
Firmware compiled date: 
Firmware compiled time: 
Firmware released date: -ù~
Firmware released time: 
SW version: 
Performed by 2.5.4 Software version.
-----------------------------------------------------------------------------------
To connect GT-I9505 phone you have to perform the following steps:
1. Disconnect USB cable from phone. 
2. Go to Menu->Settings->More->About Device.
3.Tap on "Build number" 7 times to enable developer options.
4. Go to Menu->Settings->More->Developer options.
5. Turn on "USB Debugging" option.
6. Go to dial window.
7. Enter "*#0808#" number.
8. Select "DM+Modem+ADB".
9. Press Home button.
10. Restart phone.
11. Press "Read Info" in software.
-----------------------------------------------------------------------------------
Platform: Samsung Android
Selected port: COM26
Selected model: GT-I9505
Reading info, please wait...
Detected phone model: GT-I9505
Firmware compiled date: Wed Nov 16 19:12:05 KST 2016
PDA version: I9505XXUHPK2
CSC version: I9505ITVHPL1
SW version: I9505XXUHPK2
Phone SN: RF8DC0N19JM
Android version: 5.0.1 (LRX22C)
Sales code: ITV
Country: ITALY
HW platform: msm8960
HW Chip: apq8064
HW Modem: MDM9215M
Security patch level: 2016-11-01
SIM 1 status: absent
Codename: jfltexx
Performed by 2.5.4 Software version.

Octopus box · 05-27-2017, 07:24

Try to reflash the phone, repeat all configuration steps, then try to connect the phone again.

03-01-2017, 18:49	#1 (permalink)
zulfqarali Banned Join Date: Mar 2010 Location: Okara Pakistan Age: 47 Posts: 1,205 Member: 1273573 Status: Offline Sonork: 100.1623251 QQ.2905713135 Thanks Meter: 3,780	Samsung i9505 3G 4G Repair with *** Octoplus Box* Samsung i9505 3G 4G Repair with * Octoplus Box*** BR. Last edited by Octopus box; 03-02-2017 at 07:33.

03-02-2017, 10:34	#2 (permalink)
Octopus box Product Supporter Join Date: Oct 2009 Location: Romania, Bucharest Posts: 99,848 Member: 1146942 Status: Offline Sonork: 100.1587278 Thanks Meter: 27,413	Thanks for good report.

05-24-2017, 16:47	#3 (permalink)
BxS4ever Freak Poster Join Date: Jan 2014 Location: Italy Posts: 231 Member: 2101975 Status: Offline Thanks Meter: 21	Hello. I have here another Galaxy S4 wihch works fine except network 3g/4g. When I press the repair button, It will not proceed as the phone is in emegency mode. Typing #0808# and changing mtp+adb in dm+modem+adb my pc will not recognize the phone's com port. I have root permission access + debug usb enabled. Here's the log with the read info: Welcome to Octoplus/Octopus Box Samsung software version 2.5.4 ----------------------------------------------------------------------------------- ----------------------------------------------------------------------------------- To connect GT-I9505 phone you have to perform the following steps: 1. Disconnect USB cable from phone. 2. Go to Menu->Settings->More->About Device. 3.Tap on "Build number" 7 times to enable developer options. 4. Go to Menu->Settings->More->Developer options. 5. Turn on "USB Debugging" option. 6. Go to dial window. 7. Enter "#0808#" number. 8. Select "DM+Modem+ADB". 9. Press Home button. 10. Restart phone. 11. Press "Read Info" in software. ----------------------------------------------------------------------------------- Platform: Samsung Android Selected port: COM20 Selected model: GT-I9505 Mode: Emergency Performed by 2.5.4 Software version. ----------------------------------------------------------------------------------- Platform: Samsung Android Selected port: COM20 Selected model: GT-I9505 Reading info, please wait... Detected phone model: GT-I9505 Firmware compiled date: Thu Oct 8 19:34:21 KST 2015 PDA version: I9505XXUHOJ2 CSC version: I9505AUTHOJ1 SW version: I9505XXUHOJ2 Phone SN: RF8DC0N19JM Android version: 5.0.1 (LRX22C) Sales code: AUT Country: Switzerland HW platform: msm8960 HW Chip: apq8064 HW Modem: MDM9215M SIM 1 status: absent Codename: jfltexx Performed by 2.5.4 Software version. ----------------------------------------------------------------------------------- Platform: Samsung Android Selected port: COM20 Selected model: GT-I9505 Mode: Emergency Performed by 2.5.4 Software version.

05-25-2017, 07:28	#4 (permalink)
Octopus box Product Supporter Join Date: Oct 2009 Location: Romania, Bucharest Posts: 99,848 Member: 1146942 Status: Offline Sonork: 100.1587278 Thanks Meter: 27,413	If phone is not being detected by PC after You select "dm+modem+adb" connection type - You need to enable CP logging in Recovery Mode.

05-26-2017, 07:30	#6 (permalink)
Octopus box Product Supporter Join Date: Oct 2009 Location: Romania, Bucharest Posts: 99,848 Member: 1146942 Status: Offline Sonork: 100.1587278 Thanks Meter: 27,413	Try to perform "Read Info" operation on different COM ports, with enabled "Manual select" option. When phone's info will be read correctly - perform "Repair 3G/4G" operation again.

05-26-2017, 14:20	#8 (permalink)
Octopus box Product Supporter Join Date: Oct 2009 Location: Romania, Bucharest Posts: 99,848 Member: 1146942 Status: Offline Sonork: 100.1587278 Thanks Meter: 27,413	Try to make "Enable DIAG" as for SM-A300F, then try to read phone's info again.

05-27-2017, 07:24	#10 (permalink)
Octopus box Product Supporter Join Date: Oct 2009 Location: Romania, Bucharest Posts: 99,848 Member: 1146942 Status: Offline Sonork: 100.1587278 Thanks Meter: 27,413	Try to reflash the phone, repeat all configuration steps, then try to connect the phone again.