GSM Shop GSM Shop
GSM-Forum  

Welcome to the GSM-Forum forums.

You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features.
Only registered members may post questions, contact other members or search our database of over 8 million posts.

Registration is fast, simple and absolutely free so please - Click to REGISTER!

If you have any problems with the registration process or your account login, please contact contact us .

Go Back   GSM-Forum > Product Support Sections > Hard/Software Products (official support) > Octopus/Octoplus > Octopus Samsung/Octoplus Samsung

Reply
 
LinkBack Thread Tools Display Modes
Old 01-22-2015, 14:52   #1 (permalink)
Freak Poster
 
Join Date: Jun 2009
Location: Sky Mobile™
Posts: 441
Member: 1049764
Status: Offline
Sonork: 100.1678585
Thanks Meter: 62
samsung i9515 wipe sequrity problame


Welcome to Octoplus/Octopus Box Samsung software version 1.8.1
-----------------------------------------------------------------------------------
To connect GT-I9515 phone you have to perform the following steps:
1. Disconnect USB cable from phone.
2. Go to Menu->Settings->More->About Device.
3.Tap on "Build number" 7 times to enable developer options.
4. Go to Menu->Settings->More->Developer options.
5. Turn on "USB Debugging" option.
6. Go to dial window.
7. Enter "*#0808#" number.
8. Select "DM+Modem+ADB".
9. Press Home button.
10. Go to dial window.
11. Enter "*#9090#" number.
12. Set "Diag config" to "USB" value.
13. Restart phone.
14. Press "Read Info" in software.
-----------------------------------------------------------------------------------
Platform: Samsung Android
Selected port: COM1
Selected model: GT-I9515
Phone was not found on the selected port!
Searching for USB diagnostic port...
Connecting to phone on COM201
Mode: Normal
Phone model: GT-I9515
Firmware compiled date: Dec 24 2013
Firmware compiled time: 00:00:00
Firmware released date: Mar 5 2014
Firmware released time: 22:03:35
Phone IMEI: 352168-06-849474-8
SW version: M9615A-CEFWTAZM-4.0.17135
-----------------------------------------------------------------------------------
Platform: Samsung Android
Selected port: COM201
Selected model: GT-I9515
Please, press "OK" button on the phone to allow USB debugging..
-----------------------------------------------------------------------------------
Platform: Samsung Android
Selected port: COM201
Selected model: GT-I9515
Reading info, please wait...
Please, press "OK" button on the phone to allow USB debugging..
Detected phone model: GT-I9515
Firmware compiled date: Wed Mar 5 21:20:18 KST 2014
PDA version: I9515XXU1ANC2
CSC version: I9515OJV1AND1
SW version: I9515XXU1ANC2
Phone IMEI: 352168068494748
Phone SN: RF8F815FS4K
Android version: 4.4.2 (KOT49H)
-----------------------------------------------------------------------------------
Platform: Samsung Android
Selected port: COM201
Selected model: GT-I9515
Detected phone model: GT-I9515
Firmware compiled date: Wed Mar 5 21:20:18 KST 2014
PDA version: I9515XXU1ANC2
CSC version: I9515OJV1AND1
SW version: I9515XXU1ANC2
Phone IMEI: 352168068494748
Phone SN: RF8F815FS4K
Android version: 4.4.2 (KOT49H)
Reading info...
Phone was not found on the selected port!
-----------------------------------------------------------------------------------
Platform: Samsung Android
Selected port: COM202
Selected model: GT-I9515
Reading info, please wait...
Detected phone model: GT-I9515
Firmware compiled date: Wed Mar 5 21:20:18 KST 2014
PDA version: I9515XXU1ANC2
CSC version: I9515OJV1AND1
SW version: I9515XXU1ANC2
Phone IMEI: 352168068494748
Phone SN: RF8F815FS4K
Android version: 4.4.2 (KOT49H)
-----------------------------------------------------------------------------------
Platform: Samsung Android
Selected port: COM202
Selected model: GT-I9515
Detected phone model: GT-I9515
Firmware compiled date: Wed Mar 5 21:20:18 KST 2014
PDA version: I9515XXU1ANC2
CSC version: I9515OJV1AND1
SW version: I9515XXU1ANC2
Phone IMEI: 352168068494748
Phone SN: RF8F815FS4K
Android version: 4.4.2 (KOT49H)
Reading info...
Phone was not found on the selected port!
-----------------------------------------------------------------------------------
Platform: Samsung Android
Selected port: COM202
Selected model: GT-I9515
Detected phone model: GT-I9515
Firmware compiled date: Wed Mar 5 21:20:18 KST 2014
PDA version: I9515XXU1ANC2
CSC version: I9515OJV1AND1
SW version: I9515XXU1ANC2
Phone IMEI: 352168068494748
Phone SN: RF8F815FS4K
Android version: 4.4.2 (KOT49H)
Reading info...
Phone was not found on the selected port!
-----------------------------------------------------------------------------------
Platform: Samsung Android
Selected port: COM203
Selected model: GT-I9515
Reading info, please wait...
Detected phone model: GT-I9515
Firmware compiled date: Wed Mar 5 21:20:18 KST 2014
PDA version: I9515XXU1ANC2
CSC version: I9515OJV1AND1
SW version: I9515XXU1ANC2
Phone IMEI: 352168068494748
Phone SN: RF8F815FS4K
Android version: 4.4.2 (KOT49H)
-----------------------------------------------------------------------------------
Platform: Samsung Android
Selected port: COM203
Selected model: GT-I9515
Detected phone model: GT-I9515
Firmware compiled date: Wed Mar 5 21:20:18 KST 2014
PDA version: I9515XXU1ANC2
CSC version: I9515OJV1AND1
SW version: I9515XXU1ANC2
Phone IMEI: 352168068494748
Phone SN: RF8F815FS4K
Android version: 4.4.2 (KOT49H)
Reading info...
Phone was not found on the selected port!
-----------------------------------------------------------------------------------
Platform: Samsung Android
Selected port: COM201
Selected model: GT-I9515
Reading info, please wait...
Detected phone model: GT-I9515
Firmware compiled date: Wed Mar 5 21:20:18 KST 2014
PDA version: I9515XXU1ANC2
CSC version: I9515OJV1AND1
SW version: I9515XXU1ANC2
Phone IMEI: 352168068494748
Phone SN: RF8F815FS4K
Android version: 4.4.2 (KOT49H)
-----------------------------------------------------------------------------------
Platform: Samsung Android
Selected port: COM201
Selected model: GT-I9515
Detected phone model: GT-I9515
Firmware compiled date: Wed Mar 5 21:20:18 KST 2014
PDA version: I9515XXU1ANC2
CSC version: I9515OJV1AND1
SW version: I9515XXU1ANC2
Phone IMEI: 352168068494748
Phone SN: RF8F815FS4K
Android version: 4.4.2 (KOT49H)
Reading info...
Phone was not found on the selected port!
  Reply With Quote
The Following User Says Thank You to naazerkhan For This Useful Post:
Old 01-22-2015, 14:55   #2 (permalink)
Product Supporter
 
Octopus box's Avatar
 
Join Date: Oct 2009
Location: Romania, Bucharest
Posts: 99,698
Member: 1146942
Status: Offline
Sonork: 100.1587278
Thanks Meter: 27,389
You need to connect the phone correctly. To connect GT-I9515, perform the following steps:

1. Disconnect USB cable from phone.
2. Go to Menu->Settings->More->About Device.
3.Tap on "Build number" 7 times to enable developer options.
4. Go to Menu->Settings->More->Developer options.
5. Turn on "USB Debugging" option.
6. Go to dial window.
7. Enter "*#0808#" number.
8. Select "DM+Modem+ADB".
9. Press Home button.
10. Go to dial window.
11. Enter "*#9090#" number.
12. Set "Diag config" to "USB" value.
13. Restart phone.
14. Press "Read Info" in software.
  Reply With Quote
The Following User Says Thank You to Octopus box For This Useful Post:
Old 01-22-2015, 16:38   #3 (permalink)
Freak Poster
 
Join Date: Jun 2009
Location: Sky Mobile™
Posts: 441
Member: 1049764
Status: Offline
Sonork: 100.1678585
Thanks Meter: 62
Welcome to Octoplus/Octopus Box Samsung software version 1.8.1
-----------------------------------------------------------------------------------
To connect GT-I9515 phone you have to perform the following steps:
1. Disconnect USB cable from phone.
2. Go to Menu->Settings->More->About Device.
3.Tap on "Build number" 7 times to enable developer options.
4. Go to Menu->Settings->More->Developer options.
5. Turn on "USB Debugging" option.
6. Go to dial window.
7. Enter "*#0808#" number.
8. Select "DM+Modem+ADB".
9. Press Home button.
10. Go to dial window.
11. Enter "*#9090#" number.
12. Set "Diag config" to "USB" value.
13. Restart phone.
14. Press "Read Info" in software.
-----------------------------------------------------------------------------------
Platform: Samsung Android
Selected port: COM1
Selected model: GT-I9515
Phone was not found on the selected port!
Searching for USB diagnostic port...
Connecting to phone on COM201
Mode: Emergency
-----------------------------------------------------------------------------------
Platform: Samsung Android
Selected port: COM201
Selected model: GT-I9515
Phone was not found on the selected port!
Searching for USB diagnostic port...
Connecting to phone on COM201
Mode: Emergency
-----------------------------------------------------------------------------------
Platform: Samsung Android
Selected port: COM202
Selected model: GT-I9515
Mode: Normal
Phone model: GT-I9515
Firmware compiled date:
Firmware compiled time:
Firmware released date: -ů~
Firmware released time:
SW version:
-----------------------------------------------------------------------------------
Platform: Samsung Android
Selected port: COM202
Selected model: GT-I9515
Mode: Normal
Phone model: GT-I9515
Firmware compiled date:
Firmware compiled time:
Firmware released date: -ů~
Firmware released time:
SW version:
-----------------------------------------------------------------------------------
Platform: Samsung Android
Selected port: COM202
Selected model: GT-I9515
Port is busy
Phone was not found on the selected port!
Searching for USB diagnostic port...
Connecting to phone on COM204
Mode: Emergency
-----------------------------------------------------------------------------------
Platform: Samsung Android
Selected port: COM204
Selected model: GT-I9515
Please, press "OK" button on the phone to allow USB debugging..
Detected phone model: GT-I9515
Firmware compiled date: Tue Apr 15 10:01:27 KST 2014
PDA version: I9515XXU1AND3
CSC version: I9515DBT1AND1
SW version: I9515XXU1AND3
Phone IMEI: 352168068494748
Phone SN: RF8F815FS4K
Android version: 4.4.2 (KOT49H)
Reading info...
Phone was not found on the selected port!
-----------------------------------------------------------------------------------
Platform: Samsung Android
Selected port: COM204
Selected model: GT-I9515
Detected phone model: GT-I9515
Firmware compiled date: Tue Apr 15 10:01:27 KST 2014
PDA version: I9515XXU1AND3
CSC version: I9515DBT1AND1
SW version: I9515XXU1AND3
Phone IMEI: 352168068494748
Phone SN: RF8F815FS4K
Android version: 4.4.2 (KOT49H)
Reading info...
Phone was not found on the selected port!
-----------------------------------------------------------------------------------
Platform: Samsung Android
Selected port: COM201
Selected model: GT-I9515
Detected phone model: GT-I9515
Firmware compiled date: Tue Apr 15 10:01:27 KST 2014
PDA version: I9515XXU1AND3
CSC version: I9515DBT1AND1
SW version: I9515XXU1AND3
Phone IMEI: 352168068494748
Phone SN: RF8F815FS4K
Android version: 4.4.2 (KOT49H)
Reading info...
Phone was not found on the selected port!
-----------------------------------------------------------------------------------
Platform: Samsung Android
Selected port: COM202
Selected model: GT-I9515
Detected phone model: GT-I9515
Firmware compiled date: Tue Apr 15 10:01:27 KST 2014
PDA version: I9515XXU1AND3
CSC version: I9515DBT1AND1
SW version: I9515XXU1AND3
Phone IMEI: 352168068494748
Phone SN: RF8F815FS4K
Android version: 4.4.2 (KOT49H)
Reading info...
Phone was not found on the selected port!
-----------------------------------------------------------------------------------
Platform: Samsung Android
Selected port: COM201
Selected model: GT-I9515
Detected phone model: GT-I9515
Firmware compiled date: Tue Apr 15 10:01:27 KST 2014
PDA version: I9515XXU1AND3
CSC version: I9515DBT1AND1
SW version: I9515XXU1AND3
Phone IMEI: 352168068494748
Phone SN: RF8F815FS4K
Android version: 4.4.2 (KOT49H)
Reading info...
Phone was not found on the selected port!
-----------------------------------------------------------------------------------
Platform: Samsung Android
Selected port: COM201
Selected model: GT-I9515
Detected phone model: GT-I9515
Firmware compiled date: Tue Apr 15 10:01:27 KST 2014
PDA version: I9515XXU1AND3
CSC version: I9515DBT1AND1
SW version: I9515XXU1AND3
Phone IMEI: 352168068494748
Phone SN: RF8F815FS4K
Android version: 4.4.2 (KOT49H)
Reading info...
Phone was not found on the selected port!
-----------------------------------------------------------------------------------
Platform: Samsung Android
Selected port: COM201
Selected model: GT-I9515
Detected phone model: GT-I9515
Firmware compiled date: Tue Apr 15 10:01:27 KST 2014
PDA version: I9515XXU1AND3
CSC version: I9515DBT1AND1
SW version: I9515XXU1AND3
Phone IMEI: 352168068494748
Phone SN: RF8F815FS4K
Android version: 4.4.2 (KOT49H)
Reading info...
Phone was not found on the selected port!

Turn on "USB Debugging" option.
Enter "*#0808#" number.
Select "DM+Modem+ADB".
this all ok
how to set Set "Diag config" to "USB" value. in 4.4.2 version
in "*#9090#" number

plz guide..
  Reply With Quote
Old 01-22-2015, 16:58   #4 (permalink)
Product Supporter
 
Octopus box's Avatar
 
Join Date: Oct 2009
Location: Romania, Bucharest
Posts: 99,698
Member: 1146942
Status: Offline
Sonork: 100.1587278
Thanks Meter: 27,389
Re-flash the phone, make Factory data reset and wipe cache partition, enter "*#0808#" number, select "DM+Modem+ADB" and try to read info via "Read info" button at "Main" tab in the Software.
  Reply With Quote
Old 01-22-2015, 18:08   #5 (permalink)
Freak Poster
 
Join Date: Jun 2009
Location: Sky Mobile™
Posts: 441
Member: 1049764
Status: Offline
Sonork: 100.1678585
Thanks Meter: 62
Welcome to Octoplus/Octopus Box Samsung software version 1.8.1
-----------------------------------------------------------------------------------
To connect GT-I9515 phone you have to perform the following steps:
1. Disconnect USB cable from phone.
2. Go to Menu->Settings->More->About Device.
3.Tap on "Build number" 7 times to enable developer options.
4. Go to Menu->Settings->More->Developer options.
5. Turn on "USB Debugging" option.
6. Go to dial window.
7. Enter "*#0808#" number.
8. Select "DM+Modem+ADB".
9. Press Home button.
10. Go to dial window.
11. Enter "*#9090#" number.
12. Set "Diag config" to "USB" value.
13. Restart phone.
14. Press "Read Info" in software.
Selected firmware file: I9515XXU1AND3_I9515DBT1AND1_DBT_Germany_Android_4. 4.2.oct
Please put the phone into Download Mode and connect USB cable.
To put GT-I9515 into Download Mode, You have to perform the following steps:
1. Reconnect the battery.
2. Press and hold "Volume-" + "Home" + "Power ON" keys.
3. When phone turns on, press "Volume+" key.
Found phone on
Firmware write started.
Writing ABOOT section...
ABOOT section has been written successfully.
Writing SBL1 section...
SBL1 section has been written successfully.
Writing SBL2 section...
SBL2 section has been written successfully.
Writing SBL3 section...
SBL3 section has been written successfully.
Writing RPM section...
RPM section has been written successfully.
Writing TZ section...
TZ section has been written successfully.
Writing BOOT section...
BOOT section has been written successfully.
Writing RECOVERY section...
RECOVERY section has been written successfully.
Writing SYSTEM section...
SYSTEM section has been written successfully.
Writing MDM section...
MDM section has been written successfully.
Writing APNHLOS section...
APNHLOS section has been written successfully.
Writing CACHE section...
CACHE section has been written successfully.
Writing HIDDEN section...
HIDDEN section has been written successfully.
Writing PERSDATA section...
PERSDATA section has been written successfully.
Firmware writing successfully completed.
-----------------------------------------------------------------------------------
Platform: Samsung Android
Selected port: COM1
Selected model: GT-I9515
Phone was not found on the selected port!
Searching for USB diagnostic port...
Connecting to phone on COM201
Mode: Emergency

Welcome to Octoplus/Octopus Box Samsung software version 1.8.1
-----------------------------------------------------------------------------------
To connect GT-I9515 phone you have to perform the following steps:
1. Disconnect USB cable from phone.
2. Go to Menu->Settings->More->About Device.
3.Tap on "Build number" 7 times to enable developer options.
4. Go to Menu->Settings->More->Developer options.
5. Turn on "USB Debugging" option.
6. Go to dial window.
7. Enter "*#0808#" number.
8. Select "DM+Modem+ADB".
9. Press Home button.
10. Go to dial window.
11. Enter "*#9090#" number.
12. Set "Diag config" to "USB" value.
13. Restart phone.
14. Press "Read Info" in software.
-----------------------------------------------------------------------------------
Platform: Samsung Android
Selected port: COM1
Selected model: GT-I9515
Phone was not found on the selected port!
Searching for USB diagnostic port...
No diagnostic ports found!
Connecting to phone on COM3
Phone connection failed
-----------------------------------------------------------------------------------
Platform: Samsung Android
Selected port: COM1
Selected model: GT-I9515
Phone was not found on the selected port!
Searching for USB diagnostic port...
Connecting to phone on COM201
Port is busy
Connecting to phone on COM202
Mode: Normal
Phone model: GT-I9515
Firmware compiled date:
Firmware compiled time:
Firmware released date: -ů~
Firmware released time:
SW version:
-----------------------------------------------------------------------------------
Platform: Samsung Android
Selected port: COM201
Selected model: GT-I9515
Phone was not found on the selected port!
Searching for USB diagnostic port...
Connecting to phone on COM201
Mode: Emergency
-----------------------------------------------------------------------------------
Platform: Samsung Android
Selected port: COM202
Selected model: GT-I9515
Port is busy
Phone was not found on the selected port!
Searching for USB diagnostic port...
Connecting to phone on COM201
Port is busy
Connecting to phone on COM202
Mode: Normal
Phone model: GT-I9515
Firmware compiled date:
Firmware compiled time:
Firmware released date: -ů~
Firmware released time:
SW version:
-----------------------------------------------------------------------------------
Platform: Samsung Android
Selected port: COM203
Selected model: GT-I9515
Phone was not found on the selected port!
Searching for USB diagnostic port...
Connecting to phone on COM201
Mode: Emergency
-----------------------------------------------------------------------------------
Platform: Samsung Android
Selected port: COM201
Selected model: GT-I9515
Port is busy
Phone was not found on the selected port!
Searching for USB diagnostic port...
Connecting to phone on COM201
Mode: Emergency
-----------------------------------------------------------------------------------
Platform: Samsung Android
Selected port: COM1
Selected model: GT-I9515
Phone was not found on the selected port!
Searching for USB diagnostic port...
Connecting to phone on COM201
Mode: Emergency

reflash ok
make Factory data reset and wipe cache partition ok
enter "*#0808#" number, select "DM+Modem+ADB" ok
but read information in main softwear not boot
  Reply With Quote
Old 01-22-2015, 18:18   #6 (permalink)
Product Supporter
 
Octopus box's Avatar
 
Join Date: Oct 2009
Location: Romania, Bucharest
Posts: 99,698
Member: 1146942
Status: Offline
Sonork: 100.1587278
Thanks Meter: 27,389
Contact us to Skype or Yahoo! Messenger, we will look remotely, where can be the problem with your phone. Our contacts You can find in our profile.
  Reply With Quote
Old 01-22-2015, 19:10   #7 (permalink)
Freak Poster
 
Join Date: Jun 2009
Location: Sky Mobile™
Posts: 441
Member: 1049764
Status: Offline
Sonork: 100.1678585
Thanks Meter: 62
Ok thanx i will contect soon tommorow
Thanx for the quick reply
  Reply With Quote
Old 01-23-2015, 10:17   #8 (permalink)
Freak Poster
 
Join Date: Jun 2009
Location: Sky Mobile™
Posts: 441
Member: 1049764
Status: Offline
Sonork: 100.1678585
Thanks Meter: 62
Welcome to Octoplus/Octopus Box Samsung software version 1.8.1
-----------------------------------------------------------------------------------
To connect GT-I9515 phone you have to perform the following steps:
1. Disconnect USB cable from phone.
2. Go to Menu->Settings->More->About Device.
3.Tap on "Build number" 7 times to enable developer options.
4. Go to Menu->Settings->More->Developer options.
5. Turn on "USB Debugging" option.
6. Go to dial window.
7. Enter "*#0808#" number.
8. Select "DM+Modem+ADB".
9. Press Home button.
10. Go to dial window.
11. Enter "*#9090#" number.
12. Set "Diag config" to "USB" value.
13. Restart phone.
14. Press "Read Info" in software.
Selected firmware file: I9515XXU1AND3_I9515YJV1ANE1_KSA_Saudi_Arabia_Andro id_4.4.2.oct
Please put the phone into Download Mode and connect USB cable.
To put GT-I9515 into Download Mode, You have to perform the following steps:
1. Reconnect the battery.
2. Press and hold "Volume-" + "Home" + "Power ON" keys.
3. When phone turns on, press "Volume+" key.
Found phone on
Firmware write started.
Writing ABOOT section...
ABOOT section has been written successfully.
Writing SBL1 section...
SBL1 section has been written successfully.
Writing SBL2 section...
SBL2 section has been written successfully.
Writing SBL3 section...
SBL3 section has been written successfully.
Writing RPM section...
RPM section has been written successfully.
Writing TZ section...
TZ section has been written successfully.
Writing BOOT section...
BOOT section has been written successfully.
Writing RECOVERY section...
RECOVERY section has been written successfully.
Writing SYSTEM section...
SYSTEM section has been written successfully.
Writing MDM section...
MDM section has been written successfully.
Writing APNHLOS section...
APNHLOS section has been written successfully.
Writing CACHE section...
CACHE section has been written successfully.
Writing HIDDEN section...
HIDDEN section has been written successfully.
Firmware writing successfully completed.
Selected firmware file: PIT_I9195XXUBML4_2340422_MULTI_CERT.oct
Please put the phone into Download Mode and connect USB cable.
To put GT-I9515 into Download Mode, You have to perform the following steps:
1. Reconnect the battery.
2. Press and hold "Volume-" + "Home" + "Power ON" keys.
3. When phone turns on, press "Volume+" key.
Found phone on
Firmware write started.
Writing PIT section...
Writing Firmware Failed
Please put the phone into Download Mode and connect USB cable.
To put GT-I9515 into Download Mode, You have to perform the following steps:
1. Reconnect the battery.
2. Press and hold "Volume-" + "Home" + "Power ON" keys.
3. When phone turns on, press "Volume+" key.
Found phone on
Firmware write started.
Writing PIT section...
Writing Firmware Failed


flash compleat after hang on samsung

now phone e: failled to mount/system(invalid argument)
  Reply With Quote
Old 01-23-2015, 10:24   #9 (permalink)
Product Supporter
 
Octopus box's Avatar
 
Join Date: Oct 2009
Location: Romania, Bucharest
Posts: 99,698
Member: 1146942
Status: Offline
Sonork: 100.1587278
Thanks Meter: 27,389
Why You have written firmware "PIT_I9195XXUBML4_2340422_MULTI_CERT.oct"? Fully charge phone's battery abd write another firmwares.
  Reply With Quote
Old 01-23-2015, 10:56   #10 (permalink)
Freak Poster
 
Join Date: Jun 2009
Location: Sky Mobile™
Posts: 441
Member: 1049764
Status: Offline
Sonork: 100.1678585
Thanks Meter: 62
Welcome to Octoplus/Octopus Box Samsung software version 1.8.1
-----------------------------------------------------------------------------------
To connect GT-I9515 phone you have to perform the following steps:
1. Disconnect USB cable from phone.
2. Go to Menu->Settings->More->About Device.
3.Tap on "Build number" 7 times to enable developer options.
4. Go to Menu->Settings->More->Developer options.
5. Turn on "USB Debugging" option.
6. Go to dial window.
7. Enter "*#0808#" number.
8. Select "DM+Modem+ADB".
9. Press Home button.
10. Go to dial window.
11. Enter "*#9090#" number.
12. Set "Diag config" to "USB" value.
13. Restart phone.
14. Press "Read Info" in software.
Selected firmware file: PIT_I9195XXUBML4_2340422_MULTI_CERT.oct
Please put the phone into Download Mode and connect USB cable.
To put GT-I9515 into Download Mode, You have to perform the following steps:
1. Reconnect the battery.
2. Press and hold "Volume-" + "Home" + "Power ON" keys.
3. When phone turns on, press "Volume+" key.
Found phone on
Firmware write started.
Writing PIT section...
Writing Firmware Failed

battaer full charge but get this error
  Reply With Quote
Old 01-23-2015, 10:58   #11 (permalink)
Product Supporter
 
Octopus box's Avatar
 
Join Date: Oct 2009
Location: Romania, Bucharest
Posts: 99,698
Member: 1146942
Status: Offline
Sonork: 100.1587278
Thanks Meter: 27,389
Why You have wrietten firmware for GT-I9195 into your GT-I9515???
  Reply With Quote
Old 01-23-2015, 11:27   #12 (permalink)
No Life Poster
 
akhil_bbsr's Avatar
 
Join Date: May 2006
Location: MOBILE SOFTZONE BHUBANESWAR IN
Posts: 3,509
Member: 271478
Status: Offline
Sonork: 1590868
Thanks Meter: 1,070
ohh ..just over looked the model @nazarkhan
  Reply With Quote
Old 01-23-2015, 12:24   #13 (permalink)
Freak Poster
 
Join Date: Jun 2009
Location: Sky Mobile™
Posts: 441
Member: 1049764
Status: Offline
Sonork: 100.1678585
Thanks Meter: 62
Welcome to Octoplus/Octopus Box Samsung software version 1.8.1
-----------------------------------------------------------------------------------
To connect GT-I9515 phone you have to perform the following steps:
1. Disconnect USB cable from phone.
2. Go to Menu->Settings->More->About Device.
3.Tap on "Build number" 7 times to enable developer options.
4. Go to Menu->Settings->More->Developer options.
5. Turn on "USB Debugging" option.
6. Go to dial window.
7. Enter "*#0808#" number.
8. Select "DM+Modem+ADB".
9. Press Home button.
10. Go to dial window.
11. Enter "*#9090#" number.
12. Set "Diag config" to "USB" value.
13. Restart phone.
14. Press "Read Info" in software.
Selected firmware file: PIT_I9195XXUBML4_2340422_MULTI_CERT.oct
Please put the phone into Download Mode and connect USB cable.
To put GT-I9515 into Download Mode, You have to perform the following steps:
1. Reconnect the battery.
2. Press and hold "Volume-" + "Home" + "Power ON" keys.
3. When phone turns on, press "Volume+" key.
Found phone on
Firmware write started.
Writing PIT section...
Writing Firmware Failed
Selected firmware file: I9515XXU1AND3_I9515OXX1AND2_PHE_Spain_Android_4.4. 2.oct
Please put the phone into Download Mode and connect USB cable.
To put GT-I9515 into Download Mode, You have to perform the following steps:
1. Reconnect the battery.
2. Press and hold "Volume-" + "Home" + "Power ON" keys.
3. When phone turns on, press "Volume+" key.
Found phone on
Firmware write started.
Writing ABOOT section...
ABOOT section has been written successfully.
Writing SBL1 section...
SBL1 section has been written successfully.
Writing SBL2 section...
SBL2 section has been written successfully.
Writing SBL3 section...
SBL3 section has been written successfully.
Writing RPM section...
RPM section has been written successfully.
Writing TZ section...
TZ section has been written successfully.
Writing BOOT section...
BOOT section has been written successfully.
Writing RECOVERY section...
RECOVERY section has been written successfully.
Writing SYSTEM section...
SYSTEM section has been written successfully.
Writing MDM section...
MDM section has been written successfully.
Writing APNHLOS section...
APNHLOS section has been written successfully.
Writing CACHE section...
CACHE section has been written successfully.
Writing HIDDEN section...
HIDDEN section has been written successfully.
Firmware writing successfully completed.


e: failled to mount/system(invalid argument)
  Reply With Quote
Old 01-23-2015, 12:32   #14 (permalink)
Product Supporter
 
Octopus box's Avatar
 
Join Date: Oct 2009
Location: Romania, Bucharest
Posts: 99,698
Member: 1146942
Status: Offline
Sonork: 100.1587278
Thanks Meter: 27,389
Make Factory data reset and wipe cache partition, and write other firmwares. Try to find PIT for this phone and write firmware with PIT. If the problem is the same, this can be HW issue.
  Reply With Quote
Old 01-23-2015, 12:38   #15 (permalink)
Freak Poster
 
Join Date: Jun 2009
Location: Sky Mobile™
Posts: 441
Member: 1049764
Status: Offline
Sonork: 100.1678585
Thanks Meter: 62
now phone hang in samsung
  Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


 



All times are GMT +1. The time now is 23:43.



Powered by Searchlight © 2024 Axivo Inc.
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2024 DragonByte Technologies Ltd.
- GSM Hosting Ltd. - 1999-2023 -
Page generated in 0.28481 seconds with 8 queries

SEO by vBSEO