Samsung j510fn 6.0.1 frp remove - GSM-Forum

fjyong · 10-14-2016, 12:51

Sr. All , its possible remover frp lock samsung j510fn 6.0.1 ****s

Octopus box · 10-14-2016, 13:05

Hello.

To remove FRP lock You can try to do the next:
I.
1) Write "boot.img" partition from appropriate Combination firmware via "Advanced mode" option (select Combination firmware, un-check partitions except "boot.img").
2) Perform "Reset FRP" operation in Software.

II.
1) Write Full Combination Firmware.
2) Go to "Developer Options" in phone Settings.
3) Check "Enable OEM unlock" option.
4) Make Factory Data Reset.
5) Reflash the phone with full stock (orignal) firmware.

Note: "boot.img" from Combinataion firmwares can be not compatible with current phone's firmware. In such case phone will stuck on logo, or will be rebooting after writing of such boot. In this case to restore the phone to it's initial condition You need to reflash it with different full stock (original) firmwares (or try to write only boot of such firmwares).
Note: You can write "boot.img", Combination firmware or to downgrade phone's firmware version only on your own risk!

fjyong · 10-14-2016, 20:32

sr . where is opcion phone terms and conditions step

Octopus box · 10-15-2016, 08:59

You will see Terms and conditions screen during initial startup of the phone. Here is how it looks like:

Vinicius · 10-15-2016, 15:27

Thanks for the help, but not found the combination file for this model in the area of donwload could help me

Thank´s advanced

Octopus box · 10-17-2016, 07:29

Combination firmware for SM-J510GN is available in "samsung/COMBINATION" folder of the Support Area.

10-14-2016, 12:51	#1 (permalink)
fjyong Freak Poster Join Date: Apr 2010 Posts: 216 Member: 1281173 Status: Offline Thanks Meter: 4	Samsung j510fn 6.0.1 frp remove Sr. All , its possible remover frp lock samsung j510fn 6.0.1 ****s

10-14-2016, 13:05	#2 (permalink)
Octopus box Product Supporter Join Date: Oct 2009 Location: Romania, Bucharest Posts: 99,841 Member: 1146942 Status: Offline Sonork: 100.1587278 Thanks Meter: 27,411	Hello. To remove FRP lock You can try to do the next: I. 1) Write "boot.img" partition from appropriate Combination firmware via "Advanced mode" option (select Combination firmware, un-check partitions except "boot.img"). 2) Perform "Reset FRP" operation in Software. II. 1) Write Full Combination Firmware. 2) Go to "Developer Options" in phone Settings. 3) Check "Enable OEM unlock" option. 4) Make Factory Data Reset. 5) Reflash the phone with full stock (orignal) firmware. Note: "boot.img" from Combinataion firmwares can be not compatible with current phone's firmware. In such case phone will stuck on logo, or will be rebooting after writing of such boot. In this case to restore the phone to it's initial condition You need to reflash it with different full stock (original) firmwares (or try to write only boot of such firmwares). Note: You can write "boot.img", Combination firmware or to downgrade phone's firmware version only on your own risk!

10-14-2016, 20:32	#3 (permalink)
fjyong Freak Poster Join Date: Apr 2010 Posts: 216 Member: 1281173 Status: Offline Thanks Meter: 4	sr . where is opcion phone terms and conditions step

10-15-2016, 08:59	#4 (permalink)
Octopus box Product Supporter Join Date: Oct 2009 Location: Romania, Bucharest Posts: 99,841 Member: 1146942 Status: Offline Sonork: 100.1587278 Thanks Meter: 27,411	You will see Terms and conditions screen during initial startup of the phone. Here is how it looks like:

10-15-2016, 15:27	#5 (permalink)
Vinicius Freak Poster Join Date: Dec 2004 Location: Brasil Age: 60 Posts: 287 Member: 99180 Status: Offline Sonork: 1575711 Thanks Meter: 8	Thanks for the help, but not found the combination file for this model in the area of donwload could help me Thank´s advanced

10-17-2016, 07:29	#6 (permalink)
Octopus box Product Supporter Join Date: Oct 2009 Location: Romania, Bucharest Posts: 99,841 Member: 1146942 Status: Offline Sonork: 100.1587278 Thanks Meter: 27,411	Combination firmware for SM-J510GN is available in "samsung/COMBINATION" folder of the Support Area.