samsung m250s flashing issue - GSM-Forum

rumenshom · 07-21-2013, 18:36

i tried to convert it i9100 and flash with I9100XXLSJ_I9100OXXLS1_OXX.

after successfully flashed phone restarting. than i flashed again this firmware and phone revived. i flashed again with this I9100BULPC_VD2LP8. its also working but 4.0.3 than i put again this firmware I9100XXLSJ_I9100OXXLS1.
but after 3% flashing its given error.

Quote:

Welcome to Octopus Box Samsung software version 1.9.4
-----------------------------------------------------------------------------------
To connect GT-I9100 phone you have to perform the following steps:
1. Disconnect USB cable from phone.
2. Go to Menu->Settings->Applications->Development.
3. Turn on "USB Debugging" option.
4. When message is appear press "Yes".
5. Go to dial window.
6. Enter "*#7284#" number.
7. Set "USB" radio button to "PDA" value.
8. Close window.
9. Go to dial window.
10. Enter "*#9090#" number.
11. Set "Diag config" to "USB" value.
12. Restart phone.
13. Press "Read Info" in software.
Selected firmware file: I9100XWLPM_I9100OXELP8_I9100XXLQ6
_HOME.oct
Please switch your phone to the download mode and connect it to a
PC.
To put GT-I9100 phone into download mode you have to perform the
following steps:
1. Reconnect phone battery.
2. Press and hold "Volume - " + "Home" + "Power" buttons.
3. When phone turns on press "Volume+" button.
Found phone on
Firmware write started.
Boot section skipped
Writing FACTORYFS section...
Writing Firmware Failed
Selected firmware file: HOME_M250S.oct
Please switch your phone to the download mode and connect it to a
PC.
To put GT-I9100 phone into download mode you have to perform the
following steps:
1. Reconnect phone battery.
2. Press and hold "Volume - " + "Home" + "Power" buttons.
3. When phone turns on press "Volume+" button.
Writing firmware Canceled
Please switch your phone to the download mode and connect it to a
PC.
To put GT-I9100 phone into download mode you have to perform the
following steps:
1. Reconnect phone battery.
2. Press and hold "Volume - " + "Home" + "Power" buttons.
3. When phone turns on press "Volume+" button.
Found phone on
Firmware write started.
Boot section skipped
Writing FACTORYFS section...
Writing Firmware Failed

now i cant flash it. always failed after 3%. i tried many firmware and flasher also.

is there any trick to recover it?

Octopus box · 07-22-2013, 07:21

Hello.
Try to write firmware with phone's boot loaders. Also try to write firmware using original Samsung flasher and firmware and "say" the result here.

07-22-2013, 07:21	#2 (permalink)
Octopus box Product Supporter Join Date: Oct 2009 Location: Romania, Bucharest Posts: 99,813 Member: 1146942 Status: Offline Sonork: 100.1587278 Thanks Meter: 27,407	Hello. Try to write firmware with phone's boot loaders. Also try to write firmware using original Samsung flasher and firmware and "say" the result here.