SM-G900P 6.0.1 Firmware Problem

[D. Dragon]

Hello,
I have g900p worked on 5.0 perfectly, I flashed 6.0 and now keep restart after few minutes, I flashed different PDA and same problem... please help

[Octopus box]

Hello.

Please, try to reflash the phone with another firmware from the Support Area.

[D. Dragon]

Originally Posted by Octopus box

Hello.

Please, try to reflash the phone with another firmware from the Support Area.

I tried but not working

[D. Dragon]

Originally Posted by Octopus box

Post here full Software log with all performed operations.

here

Welcome to Octoplus/Octopus Box Samsung software version 2.6.0
Selected AP file: C:\Users\MOHD\Desktop\G900PVPS3CQD1_SPT3CQD1_SPR_S print_USA_6.0.1\G900PVPS3CQD1_G900PSPT3CQD1_G900PV PS3CQD1_HOME.tar.md5
Please put the phone into Download Mode and connect USB cable.
To put SM-G900P into Download Mode, You have to perform the following steps:
1. Reconnect the battery.
2. Press and hold "Volume-" + "Home" + "Power ON" keys.
3. When phone turns on, press "Volume+" key.
Found phone on
Firmware write started.
Writing ABOOT section...
ABOOT section has been written successfully.
Writing SBL1 section...
SBL1 section has been written successfully.
Writing RPM section...
RPM section has been written successfully.
Writing TZ section...
TZ section has been written successfully.
Writing DBI section...
DBI section has been written successfully.
Writing APNHLOS section...
APNHLOS section has been written successfully.
Writing BOOT section...
BOOT section has been written successfully.
Writing RECOVERY section...
RECOVERY section has been written successfully.
Writing SYSTEM section...
SYSTEM section has been written successfully.
Writing CACHE section...
CACHE section has been written successfully.
Writing MODEM section...
MODEM section has been written successfully.
Firmware writing successfully completed.
Performed by 2.6.0 Software version.

all version of 6.0,, but 5.0 worked