SM-G935FD update then no network [Answered] - GSM-Forum

lrbrana · 02-10-2018, 11:36

g935fd update emergency call only....

repair network then ok but reset then same fault....

repair network without octonetwork apps please help....

Octopus box · 02-10-2018, 11:41

Hello.

Please, post here full Software log of Repair Network operation, we will check it.

lrbrana · 02-10-2018, 11:48

Platform: Samsung Android
Selected port: COM1
Selected model: SM-G935FD
Please, press "OK" button on the phone to allow USB debugging.
Please, press "OK" button on the phone to allow USB debugging.
Detected phone model: SM-G935F
Firmware compiled date: Wed Sep 13 09:03:22 KST 2017
PDA version: G935FXXU1DQIH
CSC version: unknown
SW version: G935FXXU1APD1
Phone SN: RF8H305TG8E
Android version: 7.0 (NRD90M)
Sales code: unknown
Country: unknown
HW platform: exynos5
HW Chip: exynos8890
HW Modem: SHANNON335
Security patch level: 2017-08-01
SIM 1 status: absent
SIM 2 status: absent
Codename: hero2ltexx
Checking Root:
Phone is Rooted.
Repairing network. Please wait, this can take some time...
Phone will restart now. Please don't disconnect cable!
Searching for a phone. Please wait...
Please, press "OK" button on the phone to allow USB debugging.
Please, press "OK" button on the phone to allow USB debugging.
Phone found.
Uploading service app..
OK
Installing service app...
OK
Please press "Allow" button on the phone when superuser dialog appears!
Network is successfully repaired.
Performed by 2.6.3 Software version.

network ok but reset factory setting then same problm.....

amleto90 · 02-10-2018, 12:27

Quote:

Originally Posted by lrbrana

Platform: Samsung Android
Selected port: COM1
Selected model: SM-G935FD
Please, press "OK" button on the phone to allow USB debugging.
Please, press "OK" button on the phone to allow USB debugging.
Detected phone model: SM-G935F
Firmware compiled date: Wed Sep 13 09:03:22 KST 2017
PDA version: G935FXXU1DQIH
CSC version: unknown
SW version: G935FXXU1APD1
Phone SN: RF8H305TG8E
Android version: 7.0 (NRD90M)
Sales code: unknown
Country: unknown
HW platform: exynos5
HW Chip: exynos8890
HW Modem: SHANNON335
Security patch level: 2017-08-01
SIM 1 status: absent
SIM 2 status: absent
Codename: hero2ltexx
Checking Root:
Phone is Rooted.
Repairing network. Please wait, this can take some time...
Phone will restart now. Please don't disconnect cable!
Searching for a phone. Please wait...
Please, press "OK" button on the phone to allow USB debugging.
Please, press "OK" button on the phone to allow USB debugging.
Phone found.
Uploading service app..
OK
Installing service app...
OK
Please press "Allow" button on the phone when superuser dialog appears!
Network is successfully repaired.
Performed by 2.6.3 Software version.

network ok but reset factory setting then same problm.....

Hi, make the downgrade to the Android version 6.0.1, them the patch is only on the firmware so if you do the factory reset the network does not disappear but it remains and works, but if you update the firmware or make the firmware flash the network disappears, on Android 7 installs the app Octo network And every time you do the factory reset disappears the app, so I advise you to downgrade the firmware to the version 6.0.1

lrbrana · 02-10-2018, 13:05

but i have use 7.0 android latest vertion ....6.0 not fever on me...any have others option without octonetwork on 7.0 please help the great octoplus team......

amleto90 · 02-10-2018, 13:17

Quote:

Originally Posted by lrbrana

but i have use 7.0 android latest vertion ....6.0 not fever on me...any have others option without octonetwork on 7.0 please help the great octoplus team......

You have no other alternative with the Knox warranty void at 0x1 having made the root on the phone, the only system is the patch species on Android 7 if you install Octonetwork and do the reset the line disappears, the only solution is the one I described in the previous post doing the down Grade to the 6.0.1 version, alternatively there's nothing at the moment I'm sorry

Qaisar Mahmood · 02-11-2018, 06:31

downgrade phone to 6.0.1 then repair network
if u want to update again to 7 then update to android 7 but skip modem file
tested many time

Octopus box · 02-12-2018, 10:35

Yes, also note, that You should perform "Repair Network" operation after writing new firmware and after You have performed "Factory reset" operation.

lrbrana · 02-19-2018, 14:09

Platform: Samsung Android
Selected port: COM1
Selected model: SM-G935FD
Detected phone model: SM-G935F
Firmware compiled date: Wed Jul 6 18:18:20 KST 2016
PDA version: G935FXXU1APGF
CSC version: G935FODD1APGF
SW version: G935FXXU1APEQ
Phone SN: RF8H305TG8E
Android version: 6.0.1 (MMB29K)
Sales code: INS
Country: India
HW platform: exynos5
HW Chip: exynos8890
HW Modem: SHANNON335
Security patch level: 2016-07-01
SIM 1 status: ready
SIM 2 status: absent
Codename: hero2ltexx
Checking Root:
Phone is Rooted.
Repairing network. Please wait, this can take some time...
Network is successfully repaired.
Performed by 2.6.4 Software version.
Selected BOOT file: C:\Users\RANALIVE\Desktop\G935FDXXU1APDQ_OLB1APD1_ Southeast_Asia_v6.0.1_Repair_Firmware\BL_G935FXXS1 DQHV_CL11104523_QB14682883_REV00_user_low_ship.tar .md5
Selected AP file: C:\Users\RANALIVE\Desktop\G935FDXXU1APDQ_OLB1APD1_ Southeast_Asia_v6.0.1_Repair_Firmware\AP_G935FXXS1 DQHV_CL11104523_QB14682883_REV00_user_low_ship_met a.tar.md5
Selected CP file: C:\Users\RANALIVE\Desktop\G935FDXXU1APDQ_OLB1APD1_ Southeast_Asia_v6.0.1_Repair_Firmware\CP_G935FXXU1 DQER_CL514081_QB6561685_SIGNED.tar.md5
Selected CSC file: C:\Users\RANALIVE\Desktop\G935FDXXU1APDQ_OLB1APD1_ Southeast_Asia_v6.0.1_Repair_Firmware\CSC_OLB_G935 FOLB1DQER_CL11104523_QB13765746_REV00_user_low_shi p.tar.md5
Please put the phone into Download Mode and connect USB cable.
To put SM-G935FD into Download Mode, You have to perform the following steps:
1. Press and hold "Volume-" + "Home" + "Power ON" keys.
2. When phone turns on, press "Volume+" key.
Found phone on
Advanced mode!
Firmware write started.
Writing BOOTLOADER section...
BOOTLOADER section has been written successfully.
Writing PARAM section...
PARAM section has been written successfully.
Writing CM section...
CM section has been written successfully.
Writing BOOT section...
BOOT section has been written successfully.
Writing RECOVERY section...
RECOVERY section has been written successfully.
Writing SYSTEM section...
SYSTEM section has been written successfully.
Writing RADIO section...
RADIO section has been written successfully.
Writing CP_DEBUG section...
CP_DEBUG section has been written successfully.
Writing CACHE section...
CACHE section has been written successfully.
Writing HIDDEN section...
HIDDEN section has been written successfully.
Firmware writing successfully completed.
Performed by 2.6.4 Software version.

first 6.0.1 flash then repair network then 7.0 flash emer gency call only problm...please help

Octopus box · 02-19-2018, 14:33

You should perform "Repair Network" operation after writing new firmware and after You have performed "Factory reset" operation.

02-10-2018, 11:36	#1 (permalink)
lrbrana Freak Poster Join Date: Mar 2014 Location: dhaka bangladesh Posts: 129 Member: 2156121 Status: Offline Thanks Meter: 36	SM-G935FD update then no network [Answered] g935fd update emergency call only.... repair network then ok but reset then same fault.... repair network without octonetwork apps please help.... Last edited by Octopus box; 02-10-2018 at 12:37.

02-10-2018, 11:41	#2 (permalink)
Octopus box Product Supporter Join Date: Oct 2009 Location: Romania, Bucharest Posts: 99,919 Member: 1146942 Status: Offline Sonork: 100.1587278 Thanks Meter: 27,421	Hello. Please, post here full Software log of Repair Network operation, we will check it.

02-10-2018, 11:48	#3 (permalink)
lrbrana Freak Poster Join Date: Mar 2014 Location: dhaka bangladesh Posts: 129 Member: 2156121 Status: Offline Thanks Meter: 36	Platform: Samsung Android Selected port: COM1 Selected model: SM-G935FD Please, press "OK" button on the phone to allow USB debugging. Please, press "OK" button on the phone to allow USB debugging. Detected phone model: SM-G935F Firmware compiled date: Wed Sep 13 09:03:22 KST 2017 PDA version: G935FXXU1DQIH CSC version: unknown SW version: G935FXXU1APD1 Phone SN: RF8H305TG8E Android version: 7.0 (NRD90M) Sales code: unknown Country: unknown HW platform: exynos5 HW Chip: exynos8890 HW Modem: SHANNON335 Security patch level: 2017-08-01 SIM 1 status: absent SIM 2 status: absent Codename: hero2ltexx Checking Root: Phone is Rooted. Repairing network. Please wait, this can take some time... Phone will restart now. Please don't disconnect cable! Searching for a phone. Please wait... Please, press "OK" button on the phone to allow USB debugging. Please, press "OK" button on the phone to allow USB debugging. Phone found. Uploading service app.. OK Installing service app... OK Please press "Allow" button on the phone when superuser dialog appears! Network is successfully repaired. Performed by 2.6.3 Software version. network ok but reset factory setting then same problm.....

02-10-2018, 13:05	#5 (permalink)
lrbrana Freak Poster Join Date: Mar 2014 Location: dhaka bangladesh Posts: 129 Member: 2156121 Status: Offline Thanks Meter: 36	but i have use 7.0 android latest vertion ....6.0 not fever on me...any have others option without octonetwork on 7.0 please help the great octoplus team......

02-11-2018, 06:31	#7 (permalink)
Qaisar Mahmood No Life Poster Join Date: Jan 2006 Location: Pakistan Posts: 15,094 Member: 226457 Status: Offline Sonork: No more used Thanks Meter: 14,934	downgrade phone to 6.0.1 then repair network if u want to update again to 7 then update to android 7 but skip modem file tested many time

02-12-2018, 10:35	#8 (permalink)
Octopus box Product Supporter Join Date: Oct 2009 Location: Romania, Bucharest Posts: 99,919 Member: 1146942 Status: Offline Sonork: 100.1587278 Thanks Meter: 27,421	Yes, also note, that You should perform "Repair Network" operation after writing new firmware and after You have performed "Factory reset" operation.

02-19-2018, 14:09	#9 (permalink)
lrbrana Freak Poster Join Date: Mar 2014 Location: dhaka bangladesh Posts: 129 Member: 2156121 Status: Offline Thanks Meter: 36	Platform: Samsung Android Selected port: COM1 Selected model: SM-G935FD Detected phone model: SM-G935F Firmware compiled date: Wed Jul 6 18:18:20 KST 2016 PDA version: G935FXXU1APGF CSC version: G935FODD1APGF SW version: G935FXXU1APEQ Phone SN: RF8H305TG8E Android version: 6.0.1 (MMB29K) Sales code: INS Country: India HW platform: exynos5 HW Chip: exynos8890 HW Modem: SHANNON335 Security patch level: 2016-07-01 SIM 1 status: ready SIM 2 status: absent Codename: hero2ltexx Checking Root: Phone is Rooted. Repairing network. Please wait, this can take some time... Network is successfully repaired. Performed by 2.6.4 Software version. Selected BOOT file: C:\Users\RANALIVE\Desktop\G935FDXXU1APDQ_OLB1APD1_ Southeast_Asia_v6.0.1_Repair_Firmware\BL_G935FXXS1 DQHV_CL11104523_QB14682883_REV00_user_low_ship.tar .md5 Selected AP file: C:\Users\RANALIVE\Desktop\G935FDXXU1APDQ_OLB1APD1_ Southeast_Asia_v6.0.1_Repair_Firmware\AP_G935FXXS1 DQHV_CL11104523_QB14682883_REV00_user_low_ship_met a.tar.md5 Selected CP file: C:\Users\RANALIVE\Desktop\G935FDXXU1APDQ_OLB1APD1_ Southeast_Asia_v6.0.1_Repair_Firmware\CP_G935FXXU1 DQER_CL514081_QB6561685_SIGNED.tar.md5 Selected CSC file: C:\Users\RANALIVE\Desktop\G935FDXXU1APDQ_OLB1APD1_ Southeast_Asia_v6.0.1_Repair_Firmware\CSC_OLB_G935 FOLB1DQER_CL11104523_QB13765746_REV00_user_low_shi p.tar.md5 Please put the phone into Download Mode and connect USB cable. To put SM-G935FD into Download Mode, You have to perform the following steps: 1. Press and hold "Volume-" + "Home" + "Power ON" keys. 2. When phone turns on, press "Volume+" key. Found phone on Advanced mode! Firmware write started. Writing BOOTLOADER section... BOOTLOADER section has been written successfully. Writing PARAM section... PARAM section has been written successfully. Writing CM section... CM section has been written successfully. Writing BOOT section... BOOT section has been written successfully. Writing RECOVERY section... RECOVERY section has been written successfully. Writing SYSTEM section... SYSTEM section has been written successfully. Writing RADIO section... RADIO section has been written successfully. Writing CP_DEBUG section... CP_DEBUG section has been written successfully. Writing CACHE section... CACHE section has been written successfully. Writing HIDDEN section... HIDDEN section has been written successfully. Firmware writing successfully completed. Performed by 2.6.4 Software version. first 6.0.1 flash then repair network then 7.0 flash emer gency call only problm...please help

02-19-2018, 14:33	#10 (permalink)
Octopus box Product Supporter Join Date: Oct 2009 Location: Romania, Bucharest Posts: 99,919 Member: 1146942 Status: Offline Sonork: 100.1587278 Thanks Meter: 27,421	You should perform "Repair Network" operation after writing new firmware and after You have performed "Factory reset" operation.