SM-N900 not registered on network - GSM-Forum

alilab · 12-17-2016, 14:07

After Write Cert
not registered on network
Iam Trying to write other Cert but not success UART not find mobile ???

Platform: Samsung Android
Selected port: COM3
Selected model: SM-N900
Detected phone model: SM-N900
Firmware compiled date: Tue Jul 19 18:16:53 KST 2016
PDA version: N900XXUEBPG4
CSC version: N900OJVEBPE2
SW version: N900XXUEBPB2
Phone SN: RF1F21EWFGT
Android version: 5.0 (LRX21V)
Sales code: KSA
Country: KSA
HW platform: exynos5
HW Chip: exynos5420
HW Modem: XMM6360
Security patch level: 2016-07-01
Codename: ha3gxx
Writing security backup, please wait...
Phone will restart now. Please don't disconnect cable!
Security write successfully.
Performed by 2.4.6 Software version.

Octopus box · 12-17-2016, 14:21

Hello.

Please, post here full Software log of Write Cert operation, we will check it. Also please make sure that You close on pin on battery, before connect phone via UART cable.

alilab · 12-17-2016, 14:34

Platform: Samsung Android
Selected port: COM3
Selected model: SM-N900
Selected file: D:\Samsung\firmware\N900\Cert\Cert-SM-N900_358021055278646_R21DB72RY3.cert
Detected phone model: SM-N900
Firmware compiled date: Tue Jul 19 18:16:53 KST 2016
PDA version: N900XXUEBPG4
CSC version: N900OJVEBPE2
SW version: N900XXUEBPB2
Phone SN: RF1F21EWFGT
Android version: 5.0 (LRX21V)
Sales code: KSA
Country: KSA
HW platform: exynos5
HW Chip: exynos5420
HW Modem: XMM6360
Security patch level: 2016-07-01
Codename: ha3gxx
Checking Root:
Phone is Rooted.
Reading security backup, please wait...
Backup saved as C:\Program Files\Octoplus\Octoplus_Samsung\BACKUP\Security-SM-N900-Unknown17-12-2016_18-30-42-.asec file
Phone will restart now. Please don't disconnect cable!
Perform the following steps:
1. Connect phone via UART cable to the Box.
2. Note: phone screen must be active
Connecting to phone, please wait...
Writing Certificate failed
Performed by 2.4.6 Software version.

alilab · 12-17-2016, 15:38

Please sir Any solution ???? we are waiting

Octopus box · 12-17-2016, 16:14

Please make sure that You close on pin on battery, before connect phone via UART cable, accordingly to the Software manual, press Help button and read carefully. If problem still remain, make sure that You use UART cable with 525k resistor. Post result here.

alilab · 12-17-2016, 16:23

Sir i have RXAT170 C3300K Cabel and also i hide bettry 2nd charg point

alilab · 12-18-2016, 08:22

sir any other UART cabel need for it i have C3300K ????

alilab · 12-18-2016, 09:13

With UART cabel C3300K Result

Platform: Samsung Android
Selected port: COM3
Selected model: SM-N900
Selected file: C:\Users\******Lab\Desktop\cert-sm-n900-3590470501664851-r21d9b58dvl.cert
Detected phone model: SM-N900
Firmware compiled date: Thu Jun 4 21:02:27 KST 2015
PDA version: N900XXUEBOF3
CSC version: N900OJVEBOF1
SW version: N900XXUEBOC1
Phone SN: RF1F21EWFGT
Android version: 5.0 (LRX21V)
Sales code: KSA
Country: KSA
HW platform: exynos5
HW Chip: exynos5420
HW Modem: XMM6360
Codename: ha3gxx
Checking Root:
Phone is Rooted.
Reading security backup, please wait...
Backup saved as C:\Program Files\Octoplus\Octoplus_Samsung\BACKUP\Security-SM-N900-Unknown18-12-2016_13-10-58-.asec file
Phone will restart now. Please don't disconnect cable!
Perform the following steps:
1. Connect phone via UART cable to the Box.
2. Note: phone screen must be active
Connecting to phone, please wait...
Found phone on COM3
Phone connected successfully
Checking Certificate file...
Checking Certificate failed
Writing Certificate failed
Performed by 2.4.6 Software version.

alilab · 12-18-2016, 10:57

Close the Thread now i return Mobile to customer Thanks

12-17-2016, 14:07	#1 (permalink)
alilab Insane Poster Join Date: Nov 2016 Location: Hyd, Pakistan Posts: 74 Member: 2644866 Status: Offline Thanks Meter: 15	SM-N900 not registered on network After Write Cert not registered on network Iam Trying to write other Cert but not success UART not find mobile ??? Platform: Samsung Android Selected port: COM3 Selected model: SM-N900 Detected phone model: SM-N900 Firmware compiled date: Tue Jul 19 18:16:53 KST 2016 PDA version: N900XXUEBPG4 CSC version: N900OJVEBPE2 SW version: N900XXUEBPB2 Phone SN: RF1F21EWFGT Android version: 5.0 (LRX21V) Sales code: KSA Country: KSA HW platform: exynos5 HW Chip: exynos5420 HW Modem: XMM6360 Security patch level: 2016-07-01 Codename: ha3gxx Writing security backup, please wait... Phone will restart now. Please don't disconnect cable! Security write successfully. Performed by 2.4.6 Software version. Last edited by Octopus box; 12-17-2016 at 14:37.

12-17-2016, 14:21	#2 (permalink)
Octopus box Product Supporter Join Date: Oct 2009 Location: Romania, Bucharest Posts: 99,848 Member: 1146942 Status: Offline Sonork: 100.1587278 Thanks Meter: 27,413	Hello. Please, post here full Software log of Write Cert operation, we will check it. Also please make sure that You close on pin on battery, before connect phone via UART cable.

12-17-2016, 14:34	#3 (permalink)
alilab Insane Poster Join Date: Nov 2016 Location: Hyd, Pakistan Posts: 74 Member: 2644866 Status: Offline Thanks Meter: 15	Platform: Samsung Android Selected port: COM3 Selected model: SM-N900 Selected file: D:\Samsung\firmware\N900\Cert\Cert-SM-N900_358021055278646_R21DB72RY3.cert Detected phone model: SM-N900 Firmware compiled date: Tue Jul 19 18:16:53 KST 2016 PDA version: N900XXUEBPG4 CSC version: N900OJVEBPE2 SW version: N900XXUEBPB2 Phone SN: RF1F21EWFGT Android version: 5.0 (LRX21V) Sales code: KSA Country: KSA HW platform: exynos5 HW Chip: exynos5420 HW Modem: XMM6360 Security patch level: 2016-07-01 Codename: ha3gxx Checking Root: Phone is Rooted. Reading security backup, please wait... Backup saved as C:\Program Files\Octoplus\Octoplus_Samsung\BACKUP\Security-SM-N900-Unknown17-12-2016_18-30-42-.asec file Phone will restart now. Please don't disconnect cable! Perform the following steps: 1. Connect phone via UART cable to the Box. 2. Note: phone screen must be active Connecting to phone, please wait... Writing Certificate failed Performed by 2.4.6 Software version.

12-17-2016, 15:38	#4 (permalink)
alilab Insane Poster Join Date: Nov 2016 Location: Hyd, Pakistan Posts: 74 Member: 2644866 Status: Offline Thanks Meter: 15	Please sir Any solution ???? we are waiting

12-17-2016, 16:14	#5 (permalink)
Octopus box Product Supporter Join Date: Oct 2009 Location: Romania, Bucharest Posts: 99,848 Member: 1146942 Status: Offline Sonork: 100.1587278 Thanks Meter: 27,413	Please make sure that You close on pin on battery, before connect phone via UART cable, accordingly to the Software manual, press Help button and read carefully. If problem still remain, make sure that You use UART cable with 525k resistor. Post result here.

12-17-2016, 16:23	#6 (permalink)
alilab Insane Poster Join Date: Nov 2016 Location: Hyd, Pakistan Posts: 74 Member: 2644866 Status: Offline Thanks Meter: 15	Sir i have RXAT170 C3300K Cabel and also i hide bettry 2nd charg point

12-18-2016, 08:22	#7 (permalink)
alilab Insane Poster Join Date: Nov 2016 Location: Hyd, Pakistan Posts: 74 Member: 2644866 Status: Offline Thanks Meter: 15	sir any other UART cabel need for it i have C3300K ????

12-18-2016, 09:13	#8 (permalink)
alilab Insane Poster Join Date: Nov 2016 Location: Hyd, Pakistan Posts: 74 Member: 2644866 Status: Offline Thanks Meter: 15	With UART cabel C3300K Result Platform: Samsung Android Selected port: COM3 Selected model: SM-N900 Selected file: C:\Users\******Lab\Desktop\cert-sm-n900-3590470501664851-r21d9b58dvl.cert Detected phone model: SM-N900 Firmware compiled date: Thu Jun 4 21:02:27 KST 2015 PDA version: N900XXUEBOF3 CSC version: N900OJVEBOF1 SW version: N900XXUEBOC1 Phone SN: RF1F21EWFGT Android version: 5.0 (LRX21V) Sales code: KSA Country: KSA HW platform: exynos5 HW Chip: exynos5420 HW Modem: XMM6360 Codename: ha3gxx Checking Root: Phone is Rooted. Reading security backup, please wait... Backup saved as C:\Program Files\Octoplus\Octoplus_Samsung\BACKUP\Security-SM-N900-Unknown18-12-2016_13-10-58-.asec file Phone will restart now. Please don't disconnect cable! Perform the following steps: 1. Connect phone via UART cable to the Box. 2. Note: phone screen must be active Connecting to phone, please wait... Found phone on COM3 Phone connected successfully Checking Certificate file... Checking Certificate failed Writing Certificate failed Performed by 2.4.6 Software version.

12-18-2016, 10:57	#9 (permalink)
alilab Insane Poster Join Date: Nov 2016 Location: Hyd, Pakistan Posts: 74 Member: 2644866 Status: Offline Thanks Meter: 15	Close the Thread now i return Mobile to customer Thanks