GSM Shop
GSM-Forum  

Welcome to the GSM-Forum forums.

You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features.
Only registered members may post questions, contact other members or search our database of over 8 million posts.

Registration is fast, simple and absolutely free so please - Click to REGISTER!

If you have any problems with the registration process or your account login, please contact contact us .

Go Back   GSM-Forum > Product Support Sections > Hard/Software Products (official support) > Octopus/Octoplus > Octopus Samsung/Octoplus Samsung

Reply
 
LinkBack Thread Tools Display Modes
Old 04-23-2018, 09:22   #6766 (permalink)
Junior Member
 
Join Date: Nov 2014
Location: Kurunegala,Sri lanka
Posts: 8
Member: 2292563
Status: Offline
Thanks Meter: 5
Thumbs up SM-G532F Unlock Done Without Root :)


Welcome to Octoplus Box Samsung software version 2.6.8
-----------------------------------------------------------------------------------

Platform: Samsung Android
Selected port: COM37
Selected model: SM-G532F
Operation: Read Codes - Modem port
Please, press "OK" button on the phone to allow USB debugging.
Detected phone model: SM-G532F
Firmware compiled date: Wed Jul 19 15:59:19 KST 2017
PDA version: G532FXWU1AQG5
CSC version: G532FOJV1AQG5
SW version: G532FXXU1AQG5
Phone SN: R58K20PSS0M
Android version: 6.0.1 (MMB29T)
Sales code: MID
Country: Iraq
HW platform: mt6737t
HW Chip: MT6737T
HW Modem: MT6737T
Security patch level: 2017-07-01
SIM 1 status: absent
SIM 2 status: absent
Codename: grandpplteser
Rebooting phone
Searching for a phone. Please wait...OK
Rebooting phone in Upload Mode...
Searching for a phone. Please wait...OK
Reading data...OK
Reading phone unlock codes. This can take some time, please wait...
FREEZE unlock code: 20853036
NET LOCK unlock code: 00000000
SUB LOCK unlock code: 00000000
SP LOCK unlock code: 00000000
CP LOCK unlock code: 83190847
Work time: 0:00:40
Performed by 2.6.8 Software version.

Last edited by Octopus box; 04-23-2018 at 09:36.
  Reply With Quote
The Following User Says Thank You to Isuru Dilan For This Useful Post:
Old 04-23-2018, 12:16   #6767 (permalink)
No Life Poster
 
Join Date: Feb 2006
Posts: 2,571
Member: 233142
Status: Offline
Sonork: 100.1595099
Thanks Meter: 457
Samsung GT-C3750 Read Codes successfully done

Code:
Welcome to Octoplus Box Samsung software version 2.6.8
-----------------------------------------------------------------------------------
To perform this opperation plase select USB port.
Performed by 2.6.8 Software version.
-----------------------------------------------------------------------------------
Platform: Samsung Infineon
Selected model: GT-C3750
Selected port: USB
Phone must be OFF, and the battery must be fully charged
Please, connect USB cable and reconnect battery.
Connecting...
Connecting canceled.
Performed by 2.6.8 Software version.
-----------------------------------------------------------------------------------
Platform: Samsung Infineon
Selected model: GT-C3750
Selected port: USB
Phone must be OFF, and the battery must be fully charged
Please, connect USB cable and reconnect battery.
Connecting...
Connecting canceled.
Performed by 2.6.8 Software version.
-----------------------------------------------------------------------------------
Platform: Samsung Infineon
Selected model: GT-C3750
Selected port: USB
Phone must be OFF, and the battery must be fully charged
Please, connect USB cable and reconnect battery.
Connecting...
Phone found.
Sending loaders...
Sending preloader...
Preloader send successfully
Sending mainloader...
Mainloader send successfully
Reading codes...
Deactivating MSL...
Dumping area 00 :
Dumping area 01 :
Dumping area 02 :
Dumping area 03 :
Dumping successfully finished.
Patching flash...
Reading block...
Reading block OK
Erasing block...
Erase OK
Writing block...
Write OK
MSL deactivate successfully
Please wait, when phone will be ON...
Reading info...
UniqueNumber : 80510000610004
Phone IMEI A: 356730045448794
Reading codes...
Calculating codes. Please wait...
PCK :#0141*00000000#
NCK :#0111*25449893#
SCK :#0121*00000000#
SPCK :#0133*00000000#
MCK :#0199*88214626#
Insert SIM card and type codes.
Reading codes successfully completed.
Performed by 2.6.8 Software version.

Last edited by Octopus box; 04-23-2018 at 12:21.
  Reply With Quote
The Following User Says Thank You to said4 For This Useful Post:
Old 04-23-2018, 12:50   #6768 (permalink)
Freak Poster
 
Join Date: Oct 2015
Location: bogra
Posts: 178
Member: 2468982
Status: Offline
Sonork: Koler.gaan
Thanks Meter: 84
Donate money to this user
Thumbs up SM-G532F Read Codes successfully done without root

Platform: Samsung Android
Selected port: COM3
Selected model: SM-G532F
Operation: Read Codes - Modem port
Detected phone model: SM-G532F
Firmware compiled date: Wed Jul 19 15:59:19 KST 2017
PDA version: G532FXWU1AQG5
CSC version: G532FOJV1AQG5
SW version: G532FXXU1AQG5
Phone SN: R28K147TXQP
Android version: 6.0.1 (MMB29T)
Sales code: MID
Country: Iraq
HW platform: mt6737t
HW Chip: MT6737T
HW Modem: MT6737T
Security patch level: 2017-07-01
SIM 1 status: absent
SIM 2 status: absent
Codename: grandpplteser
Rebooting phone
Searching for a phone. Please wait...OK
Rebooting phone in Upload Mode...
Searching for a phone. Please wait...OK
Reading data...OK
Reading phone unlock codes. This can take some time, please wait...
FREEZE unlock code: 35848353
NET LOCK unlock code: 00000000
SUB LOCK unlock code: 00000000
SP LOCK unlock code: 00000000
CP LOCK unlock code: 19283759
Work time: 0:01:17
Performed by 2.6.8 Software version.

Last edited by Octopus box; 04-23-2018 at 14:36.
  Reply With Quote
The Following User Says Thank You to Koler Gaan For This Useful Post:
Old 04-23-2018, 14:22   #6769 (permalink)
No Life Poster
 
Join Date: Feb 2006
Posts: 2,571
Member: 233142
Status: Offline
Sonork: 100.1595099
Thanks Meter: 457
Gt e1150 read code done

-----------------------------------------------------------------------------------
Platform: Samsung Swift
Selected model: GT-E1150
Selected port: COM8
Baud rate: 921600
Please, connect phone to UART cable, insert battery and press power
button for 3 seconds.
Phone found.
Sending preloader...
Preloader send successfully
Reading flash memory parameters..
Setting baudrate..
Sending mainloader...
Mainloader send successfully
Searching patch area, please wait...
Writing patch...
Patch successfully write.
Rebooting phone
Connecting...
Phone in TAT mode.
Reading info, please wait...
Phone IMEI A: 35255604436623
SW version: E1150AFJE
Phone SN : RPPZB39060
Reading codes...
FREZEE: 50027280
NET LOCK: 65968070
Subset LOCK: 00000000
SP LOCK: 00000000
CP LOCK: 00000000
SIM LOCK: 00011993
Activa LOCK: 00000000
User LOCK: 00000000
Performed by 2.6.8 Software version.
  Reply With Quote
Old 04-23-2018, 15:17   #6770 (permalink)
Junior Member
 
Join Date: Nov 2014
Location: Kurunegala,Sri lanka
Posts: 8
Member: 2292563
Status: Offline
Thanks Meter: 5
Thumbs up SM-J730F Unlock Done With Root Octoplus

Platform: Samsung Android
Selected port: COM65
Selected model: SM-J730F
Operation: Unlock
Detected phone model: SM-J730F
Firmware compiled date: Wed Jun 14 21:20:47 KST 2017
PDA version: J730FXWU1AQF6
CSC version: J730FOJV1AQF6
SW version: J730FXXU1AQF1
Phone SN: R58K10WXBKX
Android version: 7.0 (NRD90M)
Sales code: KSA
Country: KSA
HW platform: exynos5
HW Chip: exynos7870
HW Modem: SHANNON315
Security patch level: 2017-06-01
SIM 1 status: absent
SIM 2 status: absent
Codename: j7y17ltexx
Checking Root:
Phone is Rooted.
Reading security backup, please wait...
Backup saved as C:\Program Files (x86)\Octoplus\Octoplus_Samsung\BACKUP\Security-SM-J730F-R58K10WXBKX-23-04-2018_18-37-18-. asec file
Initializing exploit...
Phone will restart now. Please don't disconnect cable!
Searching for a phone. Please wait...
Phone found.
Executing exploit...
Exploit has been executed successfully
Unlocking phone...
Phone is successfully unlocked
To finish the operation, please restart the phone via phone's menu.
Performed by 2.6.8 Software version.

Last edited by Octopus box; 04-23-2018 at 15:34.
  Reply With Quote
The Following User Says Thank You to Isuru Dilan For This Useful Post:
Old 04-23-2018, 18:43   #6771 (permalink)
Freak Poster
 
GSMSHOP1's Avatar
 
Join Date: Jan 2007
Posts: 207
Member: 443140
Status: Offline
Thanks Meter: 39
Thumbs up Unlock SM-J700T (7.1.1) successfully done without downgrading

Unlock SM-J700T (7.1.1) successfully done without downgrading:
just root
CF-Auto-Root or TWRP

Welcome to Octoplus Box Samsung software version 2.6.8
-----------------------------------------------------------------------------------
To connect SM-J700F phone you have to perform the following steps:
1. Disconnect USB cable from phone.
2. Go to Menu->Settings->More->About Device.
3.Tap on "Build number" 7 times to enable developer options.
4. Go to Menu->Settings->More->Developer options.
5. Turn on "USB Debugging" option.
-----------------------------------------------------------------------------------
To connect SM-J700T phone you have to perform the following steps:
1. Disconnect USB cable from phone.
2. Go to Menu->Settings->More->About Device.
3.Tap on "Build number" 7 times to enable developer options.
4. Go to Menu->Settings->More->Developer options.
5. Turn on "USB Debugging" option.
-----------------------------------------------------------------------------------
Platform: Samsung Android
Selected port: COM6
Selected model: SM-J700T
Operation: Unlock
Please, press "OK" button on the phone to allow USB debugging.
Detected phone model: SM-J700T
Firmware compiled date: Tue Nov 7 18:15:26 KST 2017
PDA version: J700TUVU3BQK3
CSC version: J700TTMB3BQK3
SW version: J700TUVS3AQF1
Phone SN: R58H85EBMYM
Android version: 7.1.1 (NMF26X)
Sales code: TMB
Country: USA
HW platform: exynos5
HW Chip: exynos7580
HW Modem: SHANNON310
Security patch level: 2017-08-01
SIM 1 status: not ready
Codename: j7eltetmo
Checking Root:
Phone is Rooted.
Reading security backup, please wait...
Backup saved as C:\Program Files\Octoplus\Octoplus_Samsung
\BACKUP\Security-SM-J700T-R58H85EBMYM-23-04-2018_17-36-
49-.asec file
Unlocking phone...
Phone is successfully unlocked
To finish the operation, please restart the phone via phone's menu.
Performed by 2.6.8 Software version.

Last edited by Octopus box; 04-24-2018 at 05:29.
  Reply With Quote
The Following User Says Thank You to GSMSHOP1 For This Useful Post:
Old 04-23-2018, 21:19   #6772 (permalink)
No Life Poster
 
pr1mux's Avatar
 
Join Date: Jan 2006
Posts: 624
Member: 218901
Status: Offline
Thanks Meter: 66
Thumbs up TMB SM-G965U Unlock Successfully Done

Platform: Samsung Android
Selected port: COM72
Selected model: SM-G965U
Operation: Unlock
Detected phone model: SM-G965U
Firmware compiled date: Sun Feb 25 18:41:02 KST 2018
PDA version: G965USQU1ARBG
CSC version: G965UOYN1ARBG
SW version: G965USQU1ARBG
Phone SN: R28K22GRJVX
Android version: 8.0.0 (R16NW)
Sales code: TMB
Country: USA
HW platform: sdm845
HW Chip: SDM845
HW Modem: SDM845
Security patch level: 2018-02-01
SIM 1 status: network locked
Codename: star2qltesq
Connecting to modem port...
Found phone on COM72
Reading IMEI...OK
Searching for USB diagnostic port...
Reading info...
Mode: Normal
Firmware compiled date: Feb 07 2018
Firmware compiled time: 04:00:00
Firmware released date: Feb 24 2018
Firmware released time: 10:39:20
SW Version: MPSS.AT.4.0.c2.5-00045-SDM845_GEN_PACK-1.135721.4
Initializing exploit...OK
Reading data...OK
-----------------------------------------------------------------------------------
Connecting to server...OK
Checking smart card...OK
Username: xxxxxxxxxx
Authorizing...OK
Checking balance...OK
Checking operation...OK
Your balance: 210 credits.
-----------------------------------------------------------------------------------
Sending device information...OK
Initializing exploit...
Unlocking phone...
Phone is successfully unlocked
To finish the operation, please restart the phone via phone's menu.
Performed by 2.6.8.1 Software version.

take around 1 minute, GOOD JOB Octoplus Team, and Thank YOU

Last edited by Octopus box; 04-24-2018 at 05:32.
  Reply With Quote
The Following 2 Users Say Thank You to pr1mux For This Useful Post:
Old 04-24-2018, 12:58   #6773 (permalink)
No Life Poster
 
Dr_Wolodya's Avatar
 
Join Date: Jul 2004
Location: Ukraine
Age: 38
Posts: 2,059
Member: 75408
Status: Offline
Thanks Meter: 809
Thumbs up SM-G900T (6.0.1) unlock successfully done

SM-G900T (6.0.1) unlock successfully done:

Code:
Platform: Samsung Android
Selected port: COM17
Selected model: SM-G900T
Operation: Unlock
Reading info...
Mode: Normal
Firmware compiled date: Apr 16 2015
Firmware compiled time: 19:00:00
Firmware released date: Dec  9 2015
Firmware released time: 18:56:21
SW Version: MPSS.DI.2.0.1.c2-00158-M8974AAAAANRZM-1
Detected phone model: SM-G900T
Firmware compiled date: Sat Mar 25 15:59:04 KST 2017
PDA version: G900TUVU1GQC2
CSC version: G900TTMB1GQC2
SW version: G900TUVS1FOL1
Phone SN: RV8FC081KVB
Android version: 6.0.1 (MMB29M)
Sales code: TMB
Country: USA
HW platform: msm8974
HW Chip: MSM8974PRO
HW Modem: MSM8974PRO
Security patch level: 2017-03-01
SIM 1 status: pin required
Codename: kltetmo
Checking Root:
Phone is Rooted.
Reading security backup, please wait...
Backup saved as Security-SM-G900T-24-04-2018_14-52-17 file
Unlocking phone...
Phone will restart now. Please don't disconnect cable!
Phone is successfully unlocked
To finish the operation, please restart the phone via phone's menu.
Performed by 2.6.8.1 Software version.

Last edited by Octopus box; 04-24-2018 at 13:12.
  Reply With Quote
The Following User Says Thank You to Dr_Wolodya For This Useful Post:
Old 04-24-2018, 15:46   #6774 (permalink)
Insane Poster
 
Join Date: Apr 2015
Location: @kilinochchi, Sri Lanka
Posts: 87
Member: 2372779
Status: Offline
Sonork: 100.1680276
Thanks Meter: 24
Donate money to this user
Thumbs up SM-J730G unlock successfully without Root

SM-J730G Unlock Code Calculated Successfully with Octoplus


Welcome to Octoplus Box Samsung software version 2.6.8
-----------------------------------------------------------------------------------
Platform: Samsung Android
Selected port: COM1
Selected model: SM-J730G
Operation: Read Codes - Diag port
Searching for a phone. Please wait...
Found phone on COM85
Reading info...
Detected phone model: SM-J730G
HW Version: XME
PDA version: J730GDXU2AQK1
CSC version: J730GOLB2AQK1
CP version: J730GDXU2AQK1
Phone SN: R58K24FCLHT
Phone IMEI: 356202-09-235310-3
Searching for USB diagnostic port...OK
Connecting...OK
Reading HWID...OK
-----------------------------------------------------------------------------------
Connecting to server...
Username: ********
Authorizing...
Checking balance...
Your balance: 850 credits.
Performed by 2.6.8.1 Software version.
-----------------------------------------------------------------------------------
Platform: Samsung Android
Selected port: COM85
Selected model: SM-J730G
Operation: Read Codes - Diag port
Searching for a phone. Please wait...
Found phone on COM85
Reading info...
Detected phone model: SM-J730G
HW Version: XME
PDA version: J730GDXU2AQK1
CSC version: J730GOLB2AQK1
CP version: J730GDXU2AQK1
Phone SN: R58K24FCLHT
Phone IMEI: 356202-09-235310-3
Searching for USB diagnostic port...OK
Connecting...OK
Reading HWID...OK
-----------------------------------------------------------------------------------
Connecting to server ..
Username: ********
Connect to server successfull.
Checking smart card...
Smart card successfully checked.
Your balance: 800 credits.
-----------------------------------------------------------------------------------
Reading NV Data...OK
"Read Codes" operation will take 50 credits. Continue?
Sending request...OK
Calculating codes. Please wait...
FREEZE: 20530737
NET LOCK: 31931407
SUB LOCK: 00000000
SP LOCK: 00000000
CP LOCK: 00000000
SIM LOCK: 00000000
Performed by 2.6.8.1 Software version.
  Reply With Quote
The Following User Says Thank You to NST-Thina For This Useful Post:
Old 04-24-2018, 16:06   #6775 (permalink)
Insane Poster
 
Join Date: Jan 2006
Location: PORTUGAL
Posts: 100
Member: 216446
Status: Offline
Thanks Meter: 31
Thumbs up Samsung Galaxy S7 SM-G930F Reset FRP successfully done

SAMSUNG GALAXY S7 G930F (Android 7.0) FRP DONE VIA OCTOPLUS BOX

AS ADB CUD NOT BE ENABLED
USNG UART FRP DONE SUCESSFULLY

LOG BELOW
************************************************** ************

Welcome to Octoplus Box Samsung software version 2.6.7
-----------------------------------------------------------------------------------
To connect SM-G930F phone you have to perform the following steps:
1. Disconnect USB cable from phone.
2. Go to Menu->Settings->More->About Device.
3.Tap on "Build number" 7 times to enable developer options.
4. Go to Menu->Settings->More->Developer options.
5. Turn on "USB Debugging" option.
-----------------------------------------------------------------------------------
Platform: Samsung Android
Selected port: COM21
Selected model: SM-G930F
Operation: Reset FRP - UART UFS
Please put the phone into Download Mode and connect USB cable.
Waiting for phone...
Reading PIT...
PIT was read successfully.
Searching for UART interface.. COM21
Connect Samsung Micro UART cable(with 525K resistor), press and hold "Vol-" + "Power" buttons for 15-20 seconds
Searching for device. Please wait...
Resetting FRP lock..
FRP / Reactivation lock is successfully reseted!
Performed by 2.6.7 Software version.

Last edited by Octopus box; 04-24-2018 at 16:16.
  Reply With Quote
The Following User Says Thank You to jseyedanas For This Useful Post:
Old 04-24-2018, 18:30   #6776 (permalink)
Freak Poster
 
Join Date: Sep 2006
Location: Cuba
Posts: 500
Member: 346150
Status: Offline
Sonork: 100.1661091
Thanks Meter: 92
Cool Report Reset Screen Lock SM-C5000 successfully done

Plataforma: Samsung Android
Puerto seleccionado: COM13
Modelo seleccionado: SM-C5000
Operation: Reset Screen Lock
Reset Screen Lock operation for SM-C5000 will delete all user data on the phone (contacts, pictures and others)!
Connecting to server...
Connecting to server...Ok!
Checking resource files...
Resource files already downloaded.
Please put the phone into Download Mode and connect USB cable.
To put SM-C5000 into Download Mode, You have to perform the following steps:
1. Reconnect the battery.
2. Press and hold "Volume-" + "Home" + "Power ON" keys.
3. When phone turns on, press "Volume+" key.
Waiting for phone...
Firmware write started.
Escribiendo la sección Custom...
L a sección Custom ha sido escrita con éxito
Reset Screen Lock successfully completed.
Performed by 2.6.8.1 Software version.

Last edited by Octopus box; 04-25-2018 at 05:21.
  Reply With Quote
The Following User Says Thank You to windowshu For This Useful Post:
Old 04-24-2018, 21:56   #6777 (permalink)
Freak Poster
 
Join Date: Jan 2017
Location: Jamaica
Posts: 317
Member: 2673816
Status: Offline
Thanks Meter: 259
Smile Samsung SM-J327T Reset FRP successfully done

Welcome to Octoplus Box Samsung software version 2.6.8
Platform: Samsung Android
Selected port: COM3
Selected model: SM-J327T
Operation: Reset FRP - ADB
Searching for a phone (waiting for ADB device)...
Please, press "OK" button on the phone to allow USB debugging.
Reading info...
Detected phone model: SM-J327T
Firmware compiled date: Mon Nov 20 15:38:52 KST 2017
PDA version: J327TUVU1AQK6
CSC version: J327TTMB1AQK6
SW version: J327TUVU1AQK6
Phone SN: R28J64CY6GE
Android version: 7.0 (NRD90M)
Sales code: TMB
Country: USA
HW platform: exynos5
HW Chip: exynos7570
HW Modem: SHANNON305
Security patch level: 2017-11-01
SIM 1 status: absent
Codename: j3popeltetmo
Resetting FRP lock..
FRP lock is successfully reseted!
Goto "Menu->Settings->Backup and reset" and make "Factory data
reset"
Performed by 2.6.8.1 Software version.

Last edited by Octopus box; 04-25-2018 at 05:35.
  Reply With Quote
The Following User Says Thank You to ThePhoneTechDoc For This Useful Post:
Old 04-25-2018, 12:05   #6778 (permalink)
Freak Poster
 
Join Date: May 2014
Location: DROID_TEAM
Posts: 467
Member: 2185549
Status: Offline
Thanks Meter: 289
Donate money to this user
Thumbs up SM-A510F Reset FRP Successfully Done (Binary 4)

SM-A510F Reset FRP Successfully Done (Binary 4):

Code:
Welcome to Octoplus Box Samsung software version 2.6.6
-----------------------------------------------------------------------------------
To connect SM-N900 phone you have to perform the following steps:
1. Disconnect USB cable from phone. 
2. Go to Menu->Settings->More->About Device.
3.Tap on "Build number" 7 times to enable developer options.
4. Go to Menu->Settings->More->Developer options.
5. Turn on "USB Debugging" option.
-----------------------------------------------------------------------------------
Platform: Samsung Android
Selected port: COM1
Selected model: SM-A510F
Operation: Reset FRP - UART EMMC
Searching for UART interface.. COM3
Connect Samsung Micro UART cable(with 525K resistor), press and 
hold "Vol-" + "Power" buttons for 15-20 seconds
Searching for device. Please wait...
Phone found.
Rebooting phone in Upload Mode...OK
Please connect phone to USB cable..
Searching for a phone. Please wait...OK
Reading data...
Checking operation...OK
Searching for UART interface.. COM3
Connect Samsung Micro UART cable(with 525K resistor), press and 
hold "Vol-" + "Power" buttons for 15-20 seconds
Searching for device. Please wait...
Phone found.
Resetting FRP lock..unsuccessful
This version of "sBoot" is not supported, try to change "sBoot"!
Operation was failed!
Performed by 2.6.6 Software version.
Selected AP file: C:\Users\SAMSUN\Desktop\COMBINATION_FAC_FA51
_A510FXXU4AQC1_FAC_CL9213193_QB12832200_REV00
_user_mid_noship.tar.md5
Please put the phone into Download Mode and connect USB cable.
To put SM-A510F into Download Mode, You have to perform the 
following steps:
1. Press and hold "Volume-" + "Home" + "Power ON" keys.
2. When phone turns on, press "Volume+" key.
Found phone on 
Advanced mode!
Firmware write started.
Writing BOOTLOADER section...
BOOTLOADER section has been written successfully.
Writing BOOT section...
BOOT section has been written successfully.
Writing RECOVERY section...
RECOVERY section has been written successfully.
Firmware writing successfully completed.
Performed by 2.6.6 Software version.
-----------------------------------------------------------------------------------
Platform: Samsung Android
Selected port: COM1
Selected model: SM-A510F
Operation: Reset FRP - UART EMMC
Searching for UART interface.. COM3
Connect Samsung Micro UART cable(with 525K resistor), press and 
hold "Vol-" + "Power" buttons for 15-20 seconds
Searching for device. Please wait...
Phone found.
Rebooting phone in Upload Mode...OK
Please connect phone to USB cable..
Searching for a phone. Please wait...OK
Reading data...
Checking operation...OK
Searching for UART interface.. COM3
Connect Samsung Micro UART cable(with 525K resistor), press and 
hold "Vol-" + "Power" buttons for 15-20 seconds
Searching for device. Please wait...
Phone found.
Resetting FRP lock..unsuccessful
This version of "sBoot" is not supported, try to change "sBoot"!
Operation was failed!
Performed by 2.6.6 Software version.
Selected AP file: C:\Users\SAMSUN\Desktop\COMBINATION_FAC_FA51
_A510FXXU4AQC1_FAC_CL9213193_QB12832200_REV00
_user_mid_noship.tar.md5
Please put the phone into Download Mode and connect USB cable.
To put SM-A510F into Download Mode, You have to perform the 
following steps:
1. Press and hold "Volume-" + "Home" + "Power ON" keys.
2. When phone turns on, press "Volume+" key.
Found phone on 
Advanced mode!
Firmware write started.
Writing BOOTLOADER section...
BOOTLOADER section has been written successfully.
Writing PARAM section...
PARAM section has been written successfully.
Writing CM section...
CM section has been written successfully.
Writing BOOT section...
BOOT section has been written successfully.
Writing RECOVERY section...
RECOVERY section has been written successfully.
Writing SYSTEM section...
SYSTEM section has been written successfully.
Writing PERSDATA section...
PERSDATA section has been written successfully.
Writing RADIO section...
RADIO section has been written successfully.
Writing CACHE section...
CACHE section has been written successfully.
Firmware writing successfully completed.
Performed by 2.6.6 Software version.
-----------------------------------------------------------------------------------
Platform: Samsung Android
Selected port: COM1
Selected model: SM-A510F
Operation: Reset FRP - UART EMMC
Searching for UART interface.. COM3
Connect Samsung Micro UART cable(with 525K resistor), press and 
hold "Vol-" + "Power" buttons for 15-20 seconds
Searching for device. Please wait...
Phone found.
Rebooting phone in Upload Mode...OK
Please connect phone to USB cable..
Searching for a phone. Please wait...OK
Reading data...
Checking operation...OK
Searching for UART interface.. COM3
Connect Samsung Micro UART cable(with 525K resistor), press and 
hold "Vol-" + "Power" buttons for 15-20 seconds
Searching for device. Please wait...
Phone found.
Resetting FRP lock..unsuccessful
This version of "sBoot" is not supported, try to change "sBoot"!
Operation was failed!
Performed by 2.6.6 Software version.
Selected AP file: C:\Users\SAMSUN\Desktop\CF-Auto-Root-ha3g-
ha3gxx-smn900.tar.md5
Please put the phone into Download Mode and connect USB cable.
To put SM-A510F into Download Mode, You have to perform the 
following steps:
1. Press and hold "Volume-" + "Home" + "Power ON" keys.
2. When phone turns on, press "Volume+" key.
Found phone on 
Advanced mode!
Firmware write started.
Writing RECOVERY section...
RECOVERY section has been written successfully.
Writing CACHE section...
CACHE section has been written successfully.
Firmware writing successfully completed.
Performed by 2.6.6 Software version.
Selected AP file: C:\Users\SAMSUN\Desktop\CF-Auto-Root-c1skt-
c1skt-shve210s.tar.md5
Please put the phone into Download Mode and connect USB cable.
To put SM-A510F into Download Mode, You have to perform the 
following steps:
1. Press and hold "Volume-" + "Home" + "Power ON" keys.
2. When phone turns on, press "Volume+" key.
Found phone on 
Advanced mode!
Firmware write started.
Writing RECOVERY section...
RECOVERY section has been written successfully.
Writing CACHE section...
CACHE section has been written successfully.
Firmware writing successfully completed.
Performed by 2.6.6 Software version.
Selected AP file: C:\Users\SAMSUN\Desktop
\A510FXXU4BQCA_A510FVIR4BQCA_A510FXXU4BQCA_HOME.tar
.md5
Please put the phone into Download Mode and connect USB cable.
To put SM-A510F into Download Mode, You have to perform the 
following steps:
1. Press and hold "Volume-" + "Home" + "Power ON" keys.
2. When phone turns on, press "Volume+" key.
Found phone on 
Advanced mode!
Firmware write started.
Writing BOOTLOADER section...
BOOTLOADER section has been written successfully.
Writing BOOT section...
BOOT section has been written successfully.
Writing RECOVERY section...
RECOVERY section has been written successfully.
Writing SYSTEM section...
SYSTEM section has been written successfully.
Firmware writing successfully completed.
Performed by 2.6.6 Software version.
-----------------------------------------------------------------------------------
Platform: Samsung Android
Selected port: COM1
Selected model: SM-A510F
Operation: Reset FRP - ADB
Searching for a phone (waiting for ADB device)...
Please, press "OK" button on the phone to allow USB debugging.
Please, press "OK" button on the phone to allow USB debugging.
Reading info...
Detected phone model: SM-A510F
Firmware compiled date: Tue Mar 21 15:39:53 KST 2017
PDA version: A510FXXU4BQCA
CSC version: unknown
SW version: A510FXXU4AQC2
Phone SN: RF8H40FK8XN
Android version: 6.0.1 (MMB29K)
Sales code: unknown
Country: unknown
HW platform: exynos5
HW Chip: exynos7580
HW Modem: SHANNON310
Security patch level: 2017-03-01
SIM 1 status: absent
Codename: a5xeltexx
Resetting FRP lock..
FRP lock is successfully reseted!
Goto "Menu->Settings->Backup and reset" and make "Factory data 
reset"
Performed by 2.6.6 Software version.

Last edited by Octopus box; 04-25-2018 at 12:23.
  Reply With Quote
The Following User Says Thank You to ferouz kassim For This Useful Post:
Old 04-25-2018, 12:56   #6779 (permalink)
No Life Poster
 
GsmKotla's Avatar
 
Join Date: Sep 2013
Location: :::Madina:::
Posts: 517
Member: 2016954
Status: Offline
Sonork: 100.1646786
Thanks Meter: 193
Thumbs up SM-J320A Reset FRP successfully done via UART

Welcome to Octoplus Box Samsung software version 2.6.6
-----------------------------------------------------------------------------------
To connect SM-J320A phone you have to perform the following steps:
1. Disconnect USB cable from phone.
2. Go to Menu->Settings->More->About Device.
3.Tap on "Build number" 7 times to enable developer options.
4. Go to Menu->Settings->More->Developer options.
5. Turn on "USB Debugging" option.
-----------------------------------------------------------------------------------
Platform: Samsung Android
Selected port: COM1
Selected model: SM-J320A
Operation: Reset FRP - UART EMMC
Searching for UART interface.. COM46
Connect Samsung Micro UART cable(with 525K resistor), press and
hold "Vol-" + "Power" buttons for 15-20 seconds
Searching for device. Please wait...
Operation was canceled
Performed by 2.6.6 Software version.
-----------------------------------------------------------------------------------
Platform: Samsung Android
Selected port: COM46
Selected model: SM-J320A
Operation: Reset FRP - UART EMMC
Searching for UART interface.. COM46
Connect Samsung Micro UART cable(with 525K resistor), press and
hold "Vol-" + "Power" buttons for 15-20 seconds
Searching for device. Please wait...
Phone found.
Rebooting phone in Upload Mode...OK
Please connect phone to USB cable..
Searching for a phone. Please wait...OK
Reading data...
Checking operation...
Searching for UART interface.. COM46
Connect Samsung Micro UART cable(with 525K resistor), press and
hold "Vol-" + "Power" buttons for 15-20 seconds
Searching for device. Please wait...
Phone found.
Resetting FRP lock (1/2 attempt)..success
FRP / Reactivation lock is successfully reseted!
Performed by 2.6.6 Software version.
  Reply With Quote
The Following User Says Thank You to GsmKotla For This Useful Post:
Old 04-25-2018, 13:30   #6780 (permalink)
Freak Poster
 
pranobcox's Avatar
 
Join Date: Mar 2015
Location: Bangladesh
Age: 26
Posts: 258
Member: 2364514
Status: Offline
Thanks Meter: 302
Thumbs up Samsung SM-G610F (7.0) Reset FRP successfully done by Octoplus

without COMBINATION file

..Platform: Samsung Android
Selected port: COM12
Selected model: SM-G610F
Operation: Reset FRP - ADB
Searching for a phone (waiting for ADB device)...
Please, press "OK" button on the phone to allow USB debugging.
Reading info...
Detected phone model: SM-G610F
Firmware compiled date: Thu Oct 26 18:45:19 KST 2017
PDA version: G610FDDU1BQJ7
CSC version: G610FOJV1BQJ7
SW version: G610FDDU1BQJ4
Phone SN: R58J70XXXX
Android version: 7.0 (NRD90M)
Sales code: KSA
Country: KSA
HW platform: exynos5
HW Chip: exynos7870
HW Modem: SHANNON315
Security patch level: 2017-08-01
SIM 1 status: absent
SIM 2 status: absent
Codename: on7xeltedd
Resetting FRP lock..
FRP lock is successfully reseted!
Goto "Menu->Settings->Backup and reset" and make "Factory data reset"
Performed by 2.6.8 Software version.
  Reply With Quote
The Following User Says Thank You to pranobcox For This Useful Post:
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
thread Thread Starter Forum Replies Last Post
Unlocking 5190 Ryu Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L ) 23 01-07-2018 16:14
news headlines to gsm phone mos Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L ) 7 05-22-2016 11:42
my 8810 is phone locked ,can somebody please help duyphuc Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L ) 18 12-23-2014 08:03

 



All times are GMT +1. The time now is 10:16.



Powered by Searchlight © 2018 Axivo Inc.
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2018 DragonByte Technologies Ltd.
- GSM Hosting Ltd. - 1999-2017 -
Page generated in 0.39762 seconds with 9 queries

SEO by vBSEO