unable to unlock GT-S6310t [Answered] - GSM-Forum

sanpreet_singh · 02-19-2018, 00:26

Welcome to Octoplus Box Samsung software version 2.6.4
-----------------------------------------------------------------------------------
To connect GT-S6310T phone you have to perform the following steps:
1. Disconnect USB cable from phone.
2. Go to Menu->Settings->Applications->Development.
3. Turn on "USB Debugging" option.
4. When message is appear press "Yes".
5. Go to dial window.
6. Enter "*#9090# or *#0808#" number.
7. Set "Diag config" to "USB" value.
8. Restart phone.
9. Press "Read Info" in software.
-----------------------------------------------------------------------------------
Platform: Samsung Anycall
Selected port: COM17
Selected model: GT-S6310T
Mode: Normal
Phone model: GT-S6310
Warning: Selected model (GT-S6310T) differs from the detected one
(GT-S6310)!
Firmware compiled date: Jan 10 2013
Firmware compiled time: 05:00:00
Firmware released date: Apr 16 2013
Firmware released time: 21:49:34
Phone IMEI: 355990-05-053890-2
SW version: 76XXS-USUSKOLYM-2035
Performed by 2.6.4 Software version.
-----------------------------------------------------------------------------------
To connect GT-S6310 phone you have to perform the following steps:
1. Disconnect USB cable from phone.
2. Go to Menu->Settings->Applications->Development.
3. Turn on "USB Debugging" option.
4. When message is appear press "Yes".
5. Go to dial window.
6. Enter "*#9090# or *#0808#" number.
7. Set "Diag config" to "USB" value.
8. Restart phone.
9. Press "Read Info" in software.
-----------------------------------------------------------------------------------
Platform: Samsung Anycall
Selected port: COM17
Selected model: GT-S6310
Mode: Normal
Phone model: GT-S6310
Firmware compiled date: Jan 10 2013
Firmware compiled time: 05:00:00
Firmware released date: Apr 16 2013
Firmware released time: 21:49:34
Phone IMEI: 355990-05-053890-2
SW version: 76XXS-USUSKOLYM-2035
Performed by 2.6.4 Software version.
-----------------------------------------------------------------------------------
Platform: Samsung Android
Selected port: COM17
Selected model: GT-S6310
Warning: Selected model (GT-S6310) differs from the detected one
(GT-S6310T)!
If you want select (GT-S6310T) as (GT-S6310) model, please check
"manual select".
Repairing network failed.
Performed by 2.6.4 Software version.
-----------------------------------------------------------------------------------
To connect GT-S6310T phone you have to perform the following steps:
1. Disconnect USB cable from phone.
2. Go to Menu->Settings->Applications->Development.
3. Turn on "USB Debugging" option.
4. When message is appear press "Yes".
5. Go to dial window.
6. Enter "*#9090# or *#0808#" number.
7. Set "Diag config" to "USB" value.
8. Restart phone.
9. Press "Read Info" in software.
-----------------------------------------------------------------------------------
Platform: Samsung Anycall
Selected port: COM17
Selected model: GT-S6310T
Mode: Normal
Phone model: GT-S6310
Warning: Selected model (GT-S6310T) differs from the detected one
(GT-S6310)!
Firmware compiled date: Jan 10 2013
Firmware compiled time: 05:00:00
Firmware released date: Apr 16 2013
Firmware released time: 21:49:34
Phone IMEI: 355990-05-053890-2
SW version: 76XXS-USUSKOLYM-2035
Performed by 2.6.4 Software version.
-----------------------------------------------------------------------------------
To connect GT-S6310 phone you have to perform the following steps:
1. Disconnect USB cable from phone.
2. Go to Menu->Settings->Applications->Development.
3. Turn on "USB Debugging" option.
4. When message is appear press "Yes".
5. Go to dial window.
6. Enter "*#9090# or *#0808#" number.
7. Set "Diag config" to "USB" value.
8. Restart phone.
9. Press "Read Info" in software.
-----------------------------------------------------------------------------------
Platform: Samsung Anycall
Selected port: COM17
Selected model: GT-S6310
Mode: Normal
Phone model: GT-S6310
Firmware compiled date: Jan 10 2013
Firmware compiled time: 05:00:00
Firmware released date: Apr 16 2013
Firmware released time: 21:49:34
Phone IMEI: 355990-05-053890-2
SW version: 76XXS-USUSKOLYM-2035
Performed by 2.6.4 Software version.

UNLOCK BUTTON IS GREY

please help team

Octopus box · 02-19-2018, 08:57

Hello.

Unfortunately, Unlock for GT-S6310 isn't supported, please check List of supported models and operations before creating thread.

02-19-2018, 00:26	#1 (permalink)
sanpreet_singh Freak Poster Join Date: Feb 2006 Location: Melbourne,Vic,Australia Age: 47 Posts: 166 Member: 236236 Status: Offline Thanks Meter: 16	unable to unlock GT-S6310t [Answered] Welcome to Octoplus Box Samsung software version 2.6.4 ----------------------------------------------------------------------------------- To connect GT-S6310T phone you have to perform the following steps: 1. Disconnect USB cable from phone. 2. Go to Menu->Settings->Applications->Development. 3. Turn on "USB Debugging" option. 4. When message is appear press "Yes". 5. Go to dial window. 6. Enter "#9090# or #0808#" number. 7. Set "Diag config" to "USB" value. 8. Restart phone. 9. Press "Read Info" in software. ----------------------------------------------------------------------------------- Platform: Samsung Anycall Selected port: COM17 Selected model: GT-S6310T Mode: Normal Phone model: GT-S6310 Warning: Selected model (GT-S6310T) differs from the detected one (GT-S6310)! Firmware compiled date: Jan 10 2013 Firmware compiled time: 05:00:00 Firmware released date: Apr 16 2013 Firmware released time: 21:49:34 Phone IMEI: 355990-05-053890-2 SW version: 76XXS-USUSKOLYM-2035 Performed by 2.6.4 Software version. ----------------------------------------------------------------------------------- To connect GT-S6310 phone you have to perform the following steps: 1. Disconnect USB cable from phone. 2. Go to Menu->Settings->Applications->Development. 3. Turn on "USB Debugging" option. 4. When message is appear press "Yes". 5. Go to dial window. 6. Enter "#9090# or #0808#" number. 7. Set "Diag config" to "USB" value. 8. Restart phone. 9. Press "Read Info" in software. ----------------------------------------------------------------------------------- Platform: Samsung Anycall Selected port: COM17 Selected model: GT-S6310 Mode: Normal Phone model: GT-S6310 Firmware compiled date: Jan 10 2013 Firmware compiled time: 05:00:00 Firmware released date: Apr 16 2013 Firmware released time: 21:49:34 Phone IMEI: 355990-05-053890-2 SW version: 76XXS-USUSKOLYM-2035 Performed by 2.6.4 Software version. ----------------------------------------------------------------------------------- Platform: Samsung Android Selected port: COM17 Selected model: GT-S6310 Warning: Selected model (GT-S6310) differs from the detected one (GT-S6310T)! If you want select (GT-S6310T) as (GT-S6310) model, please check "manual select". Repairing network failed. Performed by 2.6.4 Software version. ----------------------------------------------------------------------------------- To connect GT-S6310T phone you have to perform the following steps: 1. Disconnect USB cable from phone. 2. Go to Menu->Settings->Applications->Development. 3. Turn on "USB Debugging" option. 4. When message is appear press "Yes". 5. Go to dial window. 6. Enter "#9090# or #0808#" number. 7. Set "Diag config" to "USB" value. 8. Restart phone. 9. Press "Read Info" in software. ----------------------------------------------------------------------------------- Platform: Samsung Anycall Selected port: COM17 Selected model: GT-S6310T Mode: Normal Phone model: GT-S6310 Warning: Selected model (GT-S6310T) differs from the detected one (GT-S6310)! Firmware compiled date: Jan 10 2013 Firmware compiled time: 05:00:00 Firmware released date: Apr 16 2013 Firmware released time: 21:49:34 Phone IMEI: 355990-05-053890-2 SW version: 76XXS-USUSKOLYM-2035 Performed by 2.6.4 Software version. ----------------------------------------------------------------------------------- To connect GT-S6310 phone you have to perform the following steps: 1. Disconnect USB cable from phone. 2. Go to Menu->Settings->Applications->Development. 3. Turn on "USB Debugging" option. 4. When message is appear press "Yes". 5. Go to dial window. 6. Enter "#9090# or #0808#" number. 7. Set "Diag config" to "USB" value. 8. Restart phone. 9. Press "Read Info" in software. ----------------------------------------------------------------------------------- Platform: Samsung Anycall Selected port: COM17 Selected model: GT-S6310 Mode: Normal Phone model: GT-S6310 Firmware compiled date: Jan 10 2013 Firmware compiled time: 05:00:00 Firmware released date: Apr 16 2013 Firmware released time: 21:49:34 Phone IMEI: 355990-05-053890-2 SW version: 76XXS-USUSKOLYM-2035 Performed by 2.6.4 Software version. UNLOCK BUTTON IS GREY please help team

02-19-2018, 08:57	#2 (permalink)
Octopus box Product Supporter Join Date: Oct 2009 Location: Romania, Bucharest Posts: 99,848 Member: 1146942 Status: Offline Sonork: 100.1587278 Thanks Meter: 27,413	Hello. Unfortunately, Unlock for GT-S6310 isn't supported, please check List of supported models and operations before creating thread.