How to clone sim card using a silver card..?? - GSM-Forum

beta2020 · 05-29-2002, 18:50

Hi Gents...

I read many posts in this forum and I tryed to find a complete answer or let us call it a (Refrence) to cloning the sim card usind the Silver card..

I have read the page written by X-Shadow and it is ok for the Gold card, however, it is old (as he said)..

What I need from the expert people in cloning, please, is:

* Step by step guid to clone the sime card using the silver card.

* What are the software needed to do that, and from where I can get them

* All the Hardware needed to do the job, and the best site to buy from.

* Hints and and notes that will be helpful for the people who is new in clonong world.

Please, reply to my messege, with the efficient info. please, and I will be very thankful..

Thanks

Beta2020

beta2020 · 06-02-2002, 13:02

What is up guys..??!!..

no one answer my questions.. Strange..

I need your help guy..

Alf · 06-05-2002, 02:21

Errr... sorry... was that with fries too?

Could you at least wonder trough older posts?!

Oh well...

First you need to know the KI(s)/IMSI(s) of the card(s) you wish to clone. For that you use SimScan 1.33 (Option F5 - F1) - You need a phoenix interface for this...

Then you need to program a silvercard with the software that will emulate the card. use simemu 4.01 (instructions on page) - You need a ludipipo/jdm interface for this (as well the phoenix one)

Insert card into phone...

Set the KI(s)/IMSI(s) for each card, up to 8... (using SIM ATK menu - instructions on page)

Switch either by menu or cycling power and entering PIN

Enjoy the cloned card and remember not to go "live" with both original and clone or you'll get into trouble...

fofodaman · 06-05-2002, 07:00

would be nice if u post that UEL for x-shadows page..

Thanx buddy,

beta2020 · 06-05-2002, 12:07

Thanks (alf)..

you siad I need to have a phonix and ludipipo/jdm interfaces.. that ok, but from where I can have them(any web site whois selling them).. thanks again

cut_r2000 · 06-05-2002, 13:59

HI MR ALF. CAN YOU PLEASE TELL ME HOW CAN I SWITCHING 2 CLONING SIM IN ONE BY MENU?

spida_singh · 06-05-2002, 15:20

hi, i just wanted 2 know how u wud insert a sim card in2 the phoenix??

bcuz it is much smaller than a gold card,i know the chips are in the same place,but how do i actually try n read the gsm sim card with my phoenix programmer and sim scan?

cheers

sorry 4 being a pest

spida!

cut_r2000 · 06-05-2002, 16:35

i only use sim_scan to get imsi / ki & i use kissmi to genaret two file (pic/eepro) & i use twoprog with multiprogrammer2001xl & that's it man

fofodaman · 06-05-2002, 18:19

@spida_singh

u have to use a conversion card, imagine the gold card when you cut out the GSM-SIM part, that is what the conversion card looks like, it is a full size card(like gold) with that part cut in it, so you insert the sim & then insert the whole thing into the reader.

You will find it at any GSM store localy.

Alf · 06-05-2002, 18:29

@ cut_r2000:

Please stop writing in huge, colorful, bold caps or I'll start deleting your posts...

What software is it on the card? How did you program it?

Alf · 06-05-2002, 20:37

KissMi? Which version? Silver? Gold?

KissMi uses .hex from which emulator? simemu?

If your phone does not show a new menu named "SimEmu 4.01" then you won't be able to switch...

I advise you to use simemu 4.01.

Also make sure your phone supports SIM ATK menus... which phone do you have?

snoopy · 06-06-2002, 04:15

alf wrote....

remember not to go "live" with both original and clone or you'll get into trouble...

what are happens.. ???i have try it nothing happening yet....

cut_r2000 · 06-06-2002, 16:05

i have KisSmi for gold and my handy is 6310i & 6510 & my phone does not show a new menu named "SimEmu 4.01" . how can i use "SimEmu 4.01"can you help me please.

thank for your reply.
cut_r2000

Alf · 06-06-2002, 18:26

@snoopy:

In most countries cloning a card is illegal and if you turn two phones with the original and cloned card at the same time they {}*will* know you did it...

@cut_r2000:

SimEmu 4.01 is only for silver cards and the only one that comes with a menu (the only free one). If you use gold cards you have to power down the phone, power on and enter the other pin... (that is, if you have two cards programmed with two different pins)

cut_r2000 · 06-10-2002, 13:57

hi Alf

i buy silver card . can you tell me who can i use sim-emu? thanks for your reply.

05-29-2002, 18:50	#1 (permalink)
beta2020 Junior Member Join Date: May 2002 Location: in the WORLD Age: 38 Posts: 6 Member: 12393 Status: Offline Thanks: 0 Thanked 0 Times in 0 Posts	How to clone sim card using a silver card..?? Hi Gents... I read many posts in this forum and I tryed to find a complete answer or let us call it a (Refrence) to cloning the sim card usind the Silver card.. I have read the page written by X-Shadow and it is ok for the Gold card, however, it is old (as he said).. What I need from the expert people in cloning, please, is: * Step by step guid to clone the sime card using the silver card. * What are the software needed to do that, and from where I can get them * All the Hardware needed to do the job, and the best site to buy from. * Hints and and notes that will be helpful for the people who is new in clonong world. Please, reply to my messege, with the efficient info. please, and I will be very thankful.. Thanks Beta2020 Last edited by beta2020; 05-29-2002 at 19:03.

06-05-2002, 13:59	#6 (permalink)
cut_r2000 Freak Poster Join Date: May 2002 Location: CUT_R Age: 41 Posts: 181 Member: 11641 Status: Offline Thanks: 0 Thanked 2 Times in 2 Posts	??? HI MR ALF. CAN YOU PLEASE TELL ME HOW CAN I SWITCHING 2 CLONING SIM IN ONE BY MENU? Last edited by Alf; 06-05-2002 at 18:27.

06-05-2002, 16:35	#8 (permalink)
cut_r2000 Freak Poster Join Date: May 2002 Location: CUT_R Age: 41 Posts: 181 Member: 11641 Status: Offline Thanks: 0 Thanked 2 Times in 2 Posts	reply i only use sim_scan to get imsi / ki & i use kissmi to genaret two file (pic/eepro) & i use twoprog with multiprogrammer2001xl & that's it man

06-06-2002, 04:15	#12 (permalink)
snoopy Freak Poster Join Date: Aug 1999 Location: Denmark Age: 43 Posts: 111 Member: 444 Status: Offline Thanks: 0 Thanked 0 Times in 0 Posts	clone sim and org. sim both online...? alf wrote.... remember not to go "live" with both original and clone or you'll get into trouble... what are happens.. ???i have try it nothing happening yet....

06-06-2002, 16:05	#13 (permalink)
cut_r2000 Freak Poster Join Date: May 2002 Location: CUT_R Age: 41 Posts: 181 Member: 11641 Status: Offline Thanks: 0 Thanked 2 Times in 2 Posts	to mr/Alf i have KisSmi for gold and my handy is 6310i & 6510 & my phone does not show a new menu named "SimEmu 4.01" . how can i use "SimEmu 4.01"can you help me please. thank for your reply. cut_r2000

06-02-2002, 13:02	#2 (permalink)
beta2020 Junior Member Join Date: May 2002 Location: in the WORLD Age: 38 Posts: 6 Member: 12393 Status: Offline Thanks: 0 Thanked 0 Times in 0 Posts	What is up guys..??!!.. no one answer my questions.. Strange.. I need your help guy..

06-05-2002, 02:21	#3 (permalink)
Alf No Life Poster Join Date: Sep 2001 Location: Portugal Age: 38 Posts: 693 Member: 6156 Status: Offline Thanks: 1 Thanked 3 Times in 3 Posts	Errr... sorry... was that with fries too? Could you at least wonder trough older posts?! Oh well... First you need to know the KI(s)/IMSI(s) of the card(s) you wish to clone. For that you use SimScan 1.33 (Option F5 - F1) - You need a phoenix interface for this... Then you need to program a silvercard with the software that will emulate the card. use simemu 4.01 (instructions on page) - You need a ludipipo/jdm interface for this (as well the phoenix one) Insert card into phone... Set the KI(s)/IMSI(s) for each card, up to 8... (using SIM ATK menu - instructions on page) Switch either by menu or cycling power and entering PIN Enjoy the cloned card and remember not to go "live" with both original and clone or you'll get into trouble...

06-05-2002, 07:00	#4 (permalink)
fofodaman Freak Poster Join Date: Jan 2002 Location: Leon Posts: 461 Member: 8804 Status: Offline Thanks: 0 Thanked 4 Times in 3 Posts	would be nice if u post that UEL for x-shadows page.. Thanx buddy,

06-05-2002, 12:07	#5 (permalink)
beta2020 Junior Member Join Date: May 2002 Location: in the WORLD Age: 38 Posts: 6 Member: 12393 Status: Offline Thanks: 0 Thanked 0 Times in 0 Posts	Thanks (alf).. you siad I need to have a phonix and ludipipo/jdm interfaces.. that ok, but from where I can have them(any web site whois selling them).. thanks again

06-05-2002, 15:20	#7 (permalink)
spida_singh Major Poster Join Date: Mar 2002 Location: Leicester Age: 27 Posts: 47 Member: 10412 Status: Offline Thanks: 1 Thanked 1 Time in 1 Post	hi, i just wanted 2 know how u wud insert a sim card in2 the phoenix?? bcuz it is much smaller than a gold card,i know the chips are in the same place,but how do i actually try n read the gsm sim card with my phoenix programmer and sim scan? cheers sorry 4 being a pest spida!

06-05-2002, 18:19	#9 (permalink)
fofodaman Freak Poster Join Date: Jan 2002 Location: Leon Posts: 461 Member: 8804 Status: Offline Thanks: 0 Thanked 4 Times in 3 Posts	@spida_singh u have to use a conversion card, imagine the gold card when you cut out the GSM-SIM part, that is what the conversion card looks like, it is a full size card(like gold) with that part cut in it, so you insert the sim & then insert the whole thing into the reader. You will find it at any GSM store localy.

06-05-2002, 18:29	#10 (permalink)
Alf No Life Poster Join Date: Sep 2001 Location: Portugal Age: 38 Posts: 693 Member: 6156 Status: Offline Thanks: 1 Thanked 3 Times in 3 Posts	@ cut_r2000: Please stop writing in huge, colorful, bold caps or I'll start deleting your posts... What software is it on the card? How did you program it?

06-05-2002, 20:37	#11 (permalink)
Alf No Life Poster Join Date: Sep 2001 Location: Portugal Age: 38 Posts: 693 Member: 6156 Status: Offline Thanks: 1 Thanked 3 Times in 3 Posts	KissMi? Which version? Silver? Gold? KissMi uses .hex from which emulator? simemu? If your phone does not show a new menu named "SimEmu 4.01" then you won't be able to switch... I advise you to use simemu 4.01. Also make sure your phone supports SIM ATK menus... which phone do you have?

06-06-2002, 18:26	#14 (permalink)
Alf No Life Poster Join Date: Sep 2001 Location: Portugal Age: 38 Posts: 693 Member: 6156 Status: Offline Thanks: 1 Thanked 3 Times in 3 Posts	@snoopy: In most countries cloning a card is illegal and if you turn two phones with the original and cloned card at the same time they {}will know you did it... @cut_r2000: SimEmu 4.01 is only for silver cards and the only one that comes with a menu (the only free one). If you use gold cards you have to power down the phone, power on and enter the other pin... (that is, if you have two cards programmed with two different pins)

06-10-2002, 13:57	#15 (permalink)
cut_r2000 Freak Poster Join Date: May 2002 Location: CUT_R Age: 41 Posts: 181 Member: 11641 Status: Offline Thanks: 0 Thanked 2 Times in 2 Posts	to mr / Alf hi Alf i buy silver card . can you tell me who can i use sim-emu? thanks for your reply.

Similar Threads
thread	Thread Starter	Forum	Replies	Last Post
hi all, is there any video how to clone sim	achi_nokia	Sim Cloning and Scaning	3	04-08-2009 09:25
S55: How to clone SIM ? Exist a patch ?	maulwurf	x4x, x5x Flashpatching	0	12-07-2007 09:21
How to Clone SIM?	unicos	Sim Cloning and Scaning	0	07-21-2004 13:48
is it possible to clone sims into a normal sim card instead of silver?	qunefe	Sim Cloning and Scaning	3	11-11-2003 14:23
HOW TO CLONE SIM CARDS step by step..here 4 u	GSM Solutions Ireland	Sim Cloning and Scaning	4	03-30-2003 18:50

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode