I have a smart card programmer w/ atmel chip, can I use it to read and write sim card - GSM-Forum

drti · 11-20-2004, 22:55

I have a smart card programmer w/ atmel chipset, can is there a firmware that I can flash my programmer to program the sim cards? for clonning purpose.

thanks for any help

AOL AIM: drtiaim
Yahoo Messenger: drti2
MSN messenger: [email protected]
ICQ: 252687318

mrbossman · 11-22-2004, 18:11

I have the same question. I have a old ISO7816 programer with 6 switches and an atmel chip I used for DSS smart cards, will this programer work ?

Vinny P · 12-10-2004, 01:55

As long as it has the proper freq. match... you should be fine

Thanx
Vinny P

SkyGear · 12-12-2004, 10:42

does it support the 3.57 3.58 3.68 6.00 frequency? you should be able to use them for phoenix mode

SkyGear · 12-12-2004, 10:45

use it in phoenix mode and if you use the small form cards simcards you either need an adapter or use the old card your sim came on and use a piece of electrical tape to hold it on works well in a fix

platforms · 12-14-2004, 12:45

If it has all the necessary frequecies, you can use simscan, phoenix, and smartmouse for finding KI for the sim.

drti · 12-20-2004, 17:03

Quote:

Originally Posted by SkyGear

does it support the 3.57 3.58 3.68 6.00 frequency? you should be able to use them for phoenix mode

How do I check to see if my programmer support these frequency?

Vinny P · 12-20-2004, 19:20

Look at the specs of the device or for the crystal on the device

Thanx
Vinny P

drti · 12-22-2004, 20:43

oops, forgot to mention that the programmer i have is a t911 with 6 dip switch on the back.

Vinny P · 12-23-2004, 05:54

Depending on what it was used for and what version... it should work

Thanx
Vinny P

tccat1 · 12-23-2004, 11:06

hello there peeps ive got a cardmaster 2 does fun cards silver cards gold cards and was wondering if i can read sims with this programmer ???/

GSM_look · 12-28-2004, 14:40

Quote:

Originally Posted by tccat1

hello there peeps ive got a cardmaster 2 does fun cards silver cards gold cards and was wondering if i can read sims with this programmer ???/

drti · 02-18-2005, 23:50

alright, i found out that the t911 w/ red dip switched is a phoenix programmer. now, the question is the freq. and will it work w/ silver or greencard.

11-20-2004, 22:55	#1 (permalink)
drti Insane Poster Join Date: Aug 2004 Age: 48 Posts: 64 Member: 78111 Status: Offline Thanks Meter: 3	I have a smart card programmer w/ atmel chip, can I use it to read and write sim card I have a smart card programmer w/ atmel chipset, can is there a firmware that I can flash my programmer to program the sim cards? for clonning purpose. thanks for any help AOL AIM: drtiaim Yahoo Messenger: drti2 MSN messenger: [email protected] ICQ: 252687318

12-23-2004, 11:06	#11 (permalink)
tccat1 Insane Poster Join Date: Oct 2004 Age: 64 Posts: 76 Member: 88588 Status: Offline Thanks Meter: 1	hello there hello there peeps ive got a cardmaster 2 does fun cards silver cards gold cards and was wondering if i can read sims with this programmer ???/

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
if i have a jaf box can i use it to flash phones ?	cellularman	NSPRO	5	12-08-2005 23:07
Can i use this to read and write simcards	atifprince	Sim Cloning and Scaning	5	04-08-2005 15:48
Method to read PIN from SIM card...	MaXoN	Sim Cloning and Scaning	37	01-26-2005 10:55
I Want Soft to read and write LOG and MAP	fhector	Phone Unlocking Codes & Maps	1	08-11-2003 20:20
f_loader to read and write 3330 and 8250, anyone have?	Hanukkah	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	9	09-03-2001 06:11

11-22-2004, 18:11	#2 (permalink)
mrbossman Junior Member Join Date: Nov 2004 Age: 57 Posts: 4 Member: 93228 Status: Offline Thanks Meter: 0	I have the same question. I have a old ISO7816 programer with 6 switches and an atmel chip I used for DSS smart cards, will this programer work ?

12-10-2004, 01:55	#3 (permalink)
Vinny P Junior Member Join Date: Dec 2003 Posts: 39 Member: 47917 Status: Offline Thanks Meter: 0	As long as it has the proper freq. match... you should be fine Thanx Vinny P

12-12-2004, 10:42	#4 (permalink)
SkyGear Freak Poster Join Date: Apr 2004 Posts: 462 Member: 61204 Status: Offline Thanks Meter: 148	does it support the 3.57 3.58 3.68 6.00 frequency? you should be able to use them for phoenix mode

12-12-2004, 10:45	#5 (permalink)
SkyGear Freak Poster Join Date: Apr 2004 Posts: 462 Member: 61204 Status: Offline Thanks Meter: 148	use it in phoenix mode and if you use the small form cards simcards you either need an adapter or use the old card your sim came on and use a piece of electrical tape to hold it on works well in a fix

12-14-2004, 12:45	#6 (permalink)
platforms No Life Poster Join Date: Sep 2004 Location: London Age: 43 Posts: 520 Member: 83090 Status: Offline Sonork: 1626857 Thanks Meter: 52	If it has all the necessary frequecies, you can use simscan, phoenix, and smartmouse for finding KI for the sim.

12-20-2004, 19:20	#8 (permalink)
Vinny P Junior Member Join Date: Dec 2003 Posts: 39 Member: 47917 Status: Offline Thanks Meter: 0	Look at the specs of the device or for the crystal on the device Thanx Vinny P

12-22-2004, 20:43	#9 (permalink)
drti Insane Poster Join Date: Aug 2004 Age: 48 Posts: 64 Member: 78111 Status: Offline Thanks Meter: 3	oops, forgot to mention that the programmer i have is a t911 with 6 dip switch on the back.

12-23-2004, 05:54	#10 (permalink)
Vinny P Junior Member Join Date: Dec 2003 Posts: 39 Member: 47917 Status: Offline Thanks Meter: 0	Depending on what it was used for and what version... it should work Thanx Vinny P

02-18-2005, 23:50	#13 (permalink)
drti Insane Poster Join Date: Aug 2004 Age: 48 Posts: 64 Member: 78111 Status: Offline Thanks Meter: 3	alright, i found out that the t911 w/ red dip switched is a phoenix programmer. now, the question is the freq. and will it work w/ silver or greencard.