Missing eeprom.hex for Silver, in Sim-Emu 6.00s?

[pisac]

I downloaded Sim-Emu 6.00, and configured for silver card (6.00s), BUT... eeprom file SIM_EMU_EP_6.00.hex is for Green2 card. How to find eeprom file for silver card?

So, I returned to Sim-Emu 5.00.

I'm using Dejan's programer silver_p.exe with Dejan's shematic.

One more questions (for simemu): I want to set SIM provider name (Menu + Sim-emu-5.00 + Configure + Number #) to be ONLY name on display. Where to pach .hex files?

[ichsan]

use sim_emu_ep_6.00.hex, set to 24c64 and write to silvercard using icprog.

eprom file same for greencard2, greencard and silvercard. i have try that.

[simemu]

@pisac
Efectively, the external EEPROM file is the same for the 3 versions.

The other question, I don't understand it.

Regards

[pisac]

ETSI GSM 11.11 v6.2.0 (1997) Specification of the SIM-ME interface.pdf

10.3.11 EFSPN (Service Provider Name)
This EF contains the service provider name and appropriate requirements for the display by the ME.
Identifier: '6F46' Structure: transparent Optional
File Size: 17 bytes Update activity: low
Access Conditions:
READ ALWAYS
UPDATE ADM
INVALIDATE ADM
REHABILITATE ADM
Bytes Description M/O Length
1 Display Condition M 1 byte
2 - 17 Service Provider Name M 16 bytes
- Display Condition
Contents: display condition for the service provider name in respect to the registered PLMN (see
GSM 02.07 [3]).
Coding: see below
Byte 1:
b8 b7 b6 b5 b4 b3 b2 b1
b1=0: display of registered PLMN not required
b1=1: display of registered PLMN required
RFU (see subclause 9.3)
- Service Provider Name
Contents: service provider string to be displayed
Coding: the string shall use either
- the SMS default 7-bit coded alphabet as defined in GSM 03.38 [12] with bit 8 set to 0. The string shall be left
justified. Unused bytes shall be set to 'FF'.
- one of the UCS2 code options defined in Annex B.

-------

So, I have (long time ago) used Dejan's verison of software for Silver card, then I changed his version, added some useful funcions (for example PIN/PIN2/PUK/PUK2, different SMSC for every number, different PLMNsel, FPLMN, ACM, PIN....) and different PROVIDER NAME - most useful function!

But, SimEmu is even better... Only thing that I don't like is that registered PLMN is showed all time, along with my PROVIDER NAME. I want only my PROVIDER NAME (for example PISAC-1, PISAC-064, GORAN) to bi showed on display, and not registered PLMN (MOBITEL, VODAFONE, ORANGE...).

I must reset bit 1 of byte 1 of file 6F46 for every provider position. Because I don't have source code of SimEmu, I need information where to patch .hex file?

[pisac]

I'm using Dejan's programming software (silver_p.exe) with Dejan's programmer, and work perfect (with SimEmu5.00). But, when I try to program SimEmu6.00, eeprom file is 8000 (32KB) long, and Dejan's programmer load whole file over 2000 (8KB) eeprom of silver card, and card don't work.

I cannot use ICPROG with Dejan's programmer (or I can?).

[ichsan]

make jdm programmer, it simple and work with icprog.

[Luciano]

here is you'r solution:

Here is how to prog Silver-Simemu 6.0 with Dejan sw&hw

L.

[simemu]

@pisac
The SPN file is in the external EEPROM at address 065F.

Regards

[pisac]

@simemu

... at address 065F, but in eeprom for SimEmu5.00 or 6.00 or both?

Also, are in eeprom stored 8 (10) succesive SPN files for 8 (10) provider positions (8 x 17 Bytes)?

Must I change addresses 065F, 0670, 0681, 0692,.... , 06d6 (06f8), or all SPNs use common first byte on address 065F?

Thanks

[pisac]

In dejan's software modifyed by me, I organised 8 SPN's in eeprom (source code):

-----------------------------

EF_6F46 ;PROVIDER NAME
;ZA SVAKOG PROVAJDERA POSEBNO
de 00h, "GORAN",0FFh,0FFh,0FFh,0FFh,0FFh,0FFh,0FFh,0FFh,0F Fh,0FFh,0FFh
de 00h, " TELEKOM SRBIJA "
de 00h, "SANDRA",0FFh,0FFh,0FFh,0FFh,0FFh,0FFh,0FFh,0FFh,0 FFh,0FFh
de 00h, "GORAN *********",0FFh
de 00h, "ProMonte",0FFh,0FFh,0FFh,0FFh,0FFh,0FFh,0FFh, 0FFh
de 00h, "02 OFF LINE",0FFh,0FFh,0FFh,0FFh,0FFh
de 01h, "04 CELL TEST",0FFh,0FFh,0FFh,0FFh
de 00h, "81 TYPE APPROVAL"

------------------------------

As you can see, in this organisation I must change first byte for every provider name (position), if I want provider name to be shown with or without registered PLMN.

In this example, number 7 (Provider name "O4 CELL TEST") is shown along with name of Network connected ("MOBTEL" or any...). Rest of provider names are shown without registered PLMNs

[simemu]

@pisac
The description of the positions are used for the SPN, and they are located in flash.

Use the "Edit #" menu to put the data you want.

Regards