blade 3 new version ics 4.0.4 cant unlock - GSM-Forum

uros07 · 06-14-2013, 00:17

zte blade 3 with new version cant unlock with gb key

Code:

[13/06/2013 17:09:35] GBKey 1.48
Model selected : ZTE Blade 3
Detecting serial port...
Detected : ZTE Handset Diagnostic Interface(DFU) (COM127)
Model      : ICS_P772N10_MTSV1.0.0B01
Version    : ICS_P772N10_MTSV1.0.0B01
IMEI       : 866643xxxxxxxxx
Connecting...
Connected to server Ok
Checking GBKey...
GBKey Ok
New firmware found...
Reading...
Analysing...
Sending Info...
Connecting...
Connected to server Ok
Checking GBKey...
GBKey Ok
- Your firmware is supported right now... you can unlock it...
- Power off the phone and press vol down+power key

Code:

GBKey 1.48
Model selected : ZTE Blade 3
Detecting serial port...
Detected : ZTE Handset Diagnostic Interface(DFU) (COM127)
Model      : ICS_P772N10_MTSV1.0.0B01
Version    : ICS_P772N10_MTSV1.0.0B01
IMEI       : 866643xxxxxxxxx
Connecting...
Connected to server Ok
Checking GBKey...
GBKey Ok
Sending Loader...
Connecting...
Connected to server Ok
Checking GBKey...
GBKey Ok
Security data is corrupt !!!

boucettay · 06-14-2013, 00:45

what is condition of the phone..is working well ?
it accept original SIM card ?
it has been touched with another tool before try with GBKEY

Br

uros07 · 06-14-2013, 08:21

phone is OK, and first connect to gb key,,after GB i connect the phone to other toool but unlock not success, after that the phone works well with original SIM card

dawood1208 · 06-14-2013, 10:13

Quote:

Originally Posted by uros07

after GB i connect the phone to other toool but unlock not success

if you tired with other tool than its security data is damaged
chk imei and make sure orignal sim is working

uros07 · 06-14-2013, 10:51

ooo man, i first try with gb key and this is log ,then i tried with other tools,imei is OK , security is ok, the phone work perfectly with original sim.
Other tools are unlocked this model before GB key, but at first I tried to GB because he was in the computer.for years I've been in this business and always respected all the tools as GB, and I never talked bad about any of them, because I'm sure none of them caused damage to the phone.
Simple, it is new version of FW mts-serbia and i look for help

boucettay · 06-14-2013, 16:39

Quote:

Originally Posted by uros07

ooo man, i first try with gb key and this is log ,then i tried with other tools,imei is OK , security is ok, the phone work perfectly with original sim.
Other tools are unlocked this model before GB key, but at first I tried to GB because he was in the computer.for years I've been in this business and always respected all the tools as GB, and I never talked bad about any of them, because I'm sure none of them caused damage to the phone.
Simple, it is new version of FW mts-serbia and i look for help

We will check data on server and try simulate, to analyze what is different in your FW.

thanks for report

Best Regards

rorm · 06-23-2013, 06:58

Isflesuj telefon na verziju b10 i radi normalno.
flash phone b10 version and operating normally. Greeting MD TEAM SERBIA

microtel · 06-25-2013, 09:02

Could you be so nine and give a link to a b10 firmware? On zte devices joust the latest firmwares could be downloaded.
Thx

bratori · 07-03-2013, 21:56

phone is new, never turned on, when push read info ->

Code:

GBKey 1.48
Model selected : ZTE Blade 3
Detecting serial port...
Detected : ZTE Handset Diagnostic Interface(DFU) (COM11)
Model      : ICS_P772N10_MTSV1.0.0B01
Version    : ICS_P772N10_MTSV1.0.0B01
IMEI       : 866643011983061
Connecting...
Connected to server Ok
Checking GBKey...
GBKey Ok
Sending Loader...
Connecting...
Connected to server Ok
Checking GBKey...
GBKey Ok
Security data is corrupt !!!

tomorrow will try to flash another rom and try to unlock

unlock.mk · 07-03-2013, 22:22

There is possibility that that phone is ZTE Blade III Pro. And it is not supported by GBKey.

bratori · 07-03-2013, 22:31

this is not pro version

mt:s | Standard | ZTE Blade III

boucettay · 07-03-2013, 23:25

Quote:

Originally Posted by bratori

phone is new, never turned on, when push read info ->

Code:

GBKey 1.48
Model selected : ZTE Blade 3
Detecting serial port...
Detected : ZTE Handset Diagnostic Interface(DFU) (COM11)
Model      : ICS_P772N10_MTSV1.0.0B01
Version    : ICS_P772N10_MTSV1.0.0B01
IMEI       : 866643011983061
Connecting...
Connected to server Ok
Checking GBKey...
GBKey Ok
Sending Loader...
Connecting...
Connected to server Ok
Checking GBKey...
GBKey Ok
Security data is corrupt !!!

tomorrow will try to flash another rom and try to unlock

Try selecting different ZTE Android, P772
TMN A15, Kis pro etc etc, perhaps FW is not of ZTE Blade 3
as solution depends on FW, so perhaps you get the correct model .

Br

microtel · 07-04-2013, 15:57

I tried selecting different ZTE Android, P772
TMN A15, Kis pro etc etc, how you prefered, but no sucess!

bratori · 07-04-2013, 21:07

Quote:

Originally Posted by rorm

Isflesuj telefon na verziju b10 i radi normalno.
flash phone b10 version and operating normally. Greeting MD TEAM SERBIA

probably you ment this version for MTS Serbia ICS_P772N10V1.0.0B10
http://download.ztedevices.com/Uploa...5947389650.zip

vgundelj · 07-11-2014, 11:22

rooted phone, its unlock ok - etc new security, security data corrupt

06-14-2013, 08:21	#3 (permalink)
uros07 Major Poster Join Date: May 2010 Posts: 43 Member: 1300118 Status: Offline Thanks Meter: 13	phone is OK, and first connect to gb key,,after GB i connect the phone to other toool but unlock not success, after that the phone works well with original SIM card Last edited by uros07; 06-14-2013 at 08:29.

06-14-2013, 00:45	#2 (permalink)
boucettay No Life Poster Join Date: May 2005 Location: New Area Posts: 4,357 Member: 148814 Status: Offline Sonork: 100.1576882 Thanks Meter: 5,012	what is condition of the phone..is working well ? it accept original SIM card ? it has been touched with another tool before try with GBKEY Br

06-14-2013, 10:51	#5 (permalink)
uros07 Major Poster Join Date: May 2010 Posts: 43 Member: 1300118 Status: Offline Thanks Meter: 13	ooo man, i first try with gb key and this is log ,then i tried with other tools,imei is OK , security is ok, the phone work perfectly with original sim. Other tools are unlocked this model before GB key, but at first I tried to GB because he was in the computer.for years I've been in this business and always respected all the tools as GB, and I never talked bad about any of them, because I'm sure none of them caused damage to the phone. Simple, it is new version of FW mts-serbia and i look for help

06-23-2013, 06:58	#7 (permalink)
rorm Freak Poster Join Date: Sep 2007 Location: Serbia Posts: 163 Member: 593158 Status: Offline Thanks Meter: 15	Isflesuj telefon na verziju b10 i radi normalno. flash phone b10 version and operating normally. Greeting MD TEAM SERBIA

06-25-2013, 09:02	#8 (permalink)
microtel Freak Poster Join Date: Nov 2003 Location: Vojvodina Age: 45 Posts: 358 Member: 44395 Status: Offline Thanks Meter: 7	Could you be so nine and give a link to a b10 firmware? On zte devices joust the latest firmwares could be downloaded. Thx

07-03-2013, 22:22	#10 (permalink)
unlock.mk No Life Poster Join Date: Oct 2011 Location: Macedonia Posts: 1,196 Member: 1671934 Status: Offline Thanks Meter: 247	There is possibility that that phone is ZTE Blade III Pro. And it is not supported by GBKey.

07-03-2013, 22:31	#11 (permalink)
bratori No Life Poster Join Date: Oct 2010 Location: Serbia Posts: 632 Member: 1425628 Status: Offline Thanks Meter: 235	this is not pro version mt:s \| Standard \| ZTE Blade III

07-04-2013, 15:57	#13 (permalink)
microtel Freak Poster Join Date: Nov 2003 Location: Vojvodina Age: 45 Posts: 358 Member: 44395 Status: Offline Thanks Meter: 7	I tried selecting different ZTE Android, P772 TMN A15, Kis pro etc etc, how you prefered, but no sucess!

07-11-2014, 11:22	#15 (permalink)
vgundelj Junior Member Join Date: Sep 2005 Age: 47 Posts: 9 Member: 183591 Status: Offline Thanks Meter: 0	rooted phone, its unlock ok - etc new security, security data corrupt