i9003 Cannot CONNECT[Answered]

[zakiyyboss]

Read operation(Make sure to press Power on key)...
CPU ID: 2F10892B.
Error 11 phone doesn't respond for a long time,please reconnect!
Time: 37 s

There is a system call sd BOOT can you explain me that.. When connect to PC it detect as OMAP Device ONLY !!

I have already tried this:

1st of all check your connection is sold correctly or not
if its correct then you have to check power. you have to do with different scenario like
Connect supply ( always connect GND to BSI+GND ) and try
Connect USB only and try
Connect Supply and usb both
like this 1st time it will take some time, but as you understand there will be no problem at all
Br
Faisal_Computer

[Sniper_04]

Samsung I9003_I9008 series unbrick needs bootcard when you press power-on button
but nothing happens!

Step 1: download Samsung I9003_I9008 series (OMAP3630)Bootcard making
software.exe and double click to install it!



Step 2: double click and run it



P.S



Step 3: format an empty MMC to FAT32, connect to computer USB with a card
reader. Choose Driver according in software.



Step 4: click button Write and boot card is made successfully when it shows Done
here! Just insert MMC to phone and you can start to repair phone now!



P.S


after making bootcard,insert the mmc to i9003...
then plug in the usb then click write(write bootfile)

There is a system call sd BOOT can you explain me that

another way or solution to boot OMAP3630 when the phone is in sleepmode!
this is not the solution for deadboot phone,this is tool help the phone to detect in gpgjtag....

Samsung I9003_I9008 Series Bootcard.exe

i9003(CPU_OMAP3630)Boot_card.rar

[zakiyyboss]

then plug in the usb then click write(write bootfile)

How to do this part??? i connect to jTag? Click write BOOTFILE? from where ? Selected file in the jtag application?

[zakiyyboss]

Originally Posted by zakiyyboss

How to do this part??? i connect to jTag? Click write BOOTFILE? from where ? Selected file in the jtag application?

After making the boot card i was able to write boot file.. But phone still cannot enter download MODE !!

Set definition done!
Read operation(Make sure to press Power on key)...
CPU ID: 2F10892B.
Flash ID: 00EC0050 (512M).
Release Power on key now and operation continues...
File saved inD:\---- Mobile Boxes -----\Jtag GPG\boot file\SAMSUNG_i9003_Boot.bin
Read succeed!
Time: 20 s

One last thong which BBOT file to write??
this one SAMSUNG_i9003_Boot.bin or SAMSUNG_I9003_I9003L(CPU_OMAP3630_only)Boot.bin

[zakiyyboss]

After Write BoOt what are the step to make the phone REVIVE ?? Is there any tutorial... ! Please GUIDE !!

[Sniper_04]

you can try this bootfile

bootfile-set size to 4mb
GPGJtag SAMSUNG_i9003_Boot.bin

or write fulldump

fulldump-set size auto fullflash
GPGJtag Samsung_I9003_FULL_512M.rar


regardz

[zakiyyboss]

Originally Posted by Sniper_04

you can try this bootfile

bootfile-set size to 4mb
GPGJtag SAMSUNG_i9003_Boot.bin

or write fulldump

fulldump-set size auto fullflash
GPGJtag Samsung_I9003_FULL_512M.rar


regardz

ok thank you will try. One thing is that client try to flash the phone from a Z3x but choose a bad flash FILE.... I hope this will solve problem !!

[gamer2012]

HI to all i heve same probl , i connect i 9003 to jtag but after flash boot files phone not goes to download mode mode and i try to reflash with full but i get err in 12% i also try with betrr and supl same

[Sniper_04]

Originally Posted by gamer2012

HI to all i heve same probl , i connect i 9003 to jtag but after flash boot files phone not goes to download mode mode and i try to reflash with full but i get err in 12% i also try with betrr and supl same

did you try another fulldump?

[gamer2012]

i havent onother dump help plz

[gamer2012]

==========================================
Please press Power On key before any Read/Write/Erase operation.
PIN1 = VCC
PIN2 = TRST
PIN3 = TDI
PIN4 = TMS
PIN5 = TCK
PIN7 = TDO
PIN8 = SYSRST
Setting definition...
Set definition done!
Writing in progress(make sure to press Power On key)...
CPU ID: 2F10892B.
Flash ID: 00EC0050 (512M).
Release Power on key now and operation continues...
Error 11 phone doesn't respond for a long time,please reconnect!
Time: 2:39

[gamer2012]

problem solved i reflash by this way connect phone + and - whitaut bsi and bootcard and reflash phone with 512full flash, but now i have second probl my power button not working did you know how to solve it i that buton dont work becose phone torne on after odin restart and work corectly but home and power keys are not working help plzzz

[Sniper_04]

Originally Posted by gamer2012

problem solved i reflash by this way connect phone + and - whitaut bsi and bootcard and reflash phone with 512full flash, but now i have second probl my power button not working did you know how to solve it i that buton dont work becose phone torne on after odin restart and work corectly but home and power keys are not working help plzzz

what fulldump or fullflash you are using?
did you try to fullflash in odin?
please check the imei and baseband....

[gamer2012]

hi to all my problem solved 100% my phones power key dont work it was hardwer problem i make a jumpers and now phone work , and boot i rapire with full flash that in suport area working flash thanks to all

[aZimBahar]

Hello
Here My Create Post . I need Help . . .
http://forum.gsmhosting.com/vbb/f705...red-t-1554749/



I Can Not Do it .
Samsung I9003_I9008 Series Bootcard.exe

Where I Install This File ? I Mean Which Location ? Mean This Image .




L:\Sanmsungi9003???


I Can Not Write (I9003_SDBootCard.img) file . Given Error 8 Mean This Image .



I Am waiting For Reply . . .