Asansam Dongle HelpDesk Post Your Problems(With logos) - Page 2 - GSM-Forum

prody · 06-12-2012, 14:39

Hi guys!

First of all, I just now bought the key, and what I (will) can do with it, is realy amazing, and I realy appriciate your hard work!
But...

I have a N7000 and the Galaxy S2. Both of them is have an "Unknow Phone" problem.... :/

I tried root, because have to if I want to use the UBTool. I turn the debugging mode, and all of driver installed (The PC see the phone as ADB interface), but when I try to use root as ADB action, I always get the same error:

Code:

------------------------------------------------------------------------------------------------
 Turn-on the Phone Goto 'Settings > Application > Development' 
 And Check 'Usb Debugging' Then Connect Usb Cable To Phone And Install Needed Driver.
------------------------------------------------------------------------------------------------
 Prepairing ...OK
 Device Found!
 Root Procedure Started!
 Refreshing ...  OK
 Prepairing ROOTFILE1(STEP 1) ... Fail!
 [Err:2] Cannot stat!
 Operation Completed
 Operation Time: 00:00:04

What I can do more? Or what I did wrong?

**Asansam dongle** · 06-13-2012, 07:04

Quote:

Hi guys!

First of all, I just now bought the key, and what I (will) can do with it, is realy amazing, and I realy appriciate your hard work!
But...

I have a N7000 and the Galaxy S2. Both of them is have an "Unknow Phone" problem.... :/

I tried root, because have to if I want to use the UBTool. I turn the debugging mode, and all of driver installed (The PC see the phone as ADB interface), but when I try to use root as ADB action, I always get the same error:

n7000 repair is very easy
what is your phone version

prody · 06-13-2012, 09:28

Quote:

Originally Posted by Asansam dongle

n7000 repair is very easy
what is your phone version

I can use the UBtool and It said OK, the NVM repair was succesful, but still phone unknow. The problem maybe the IC-Tranciever I get it, but I want to make sure the Dongle is working without any error.

Example, I tried read the flash on a fully working N7000, and the result:

The sw version on the phone: XXLPY-XXLP5
maybe this sw verzion is too new?

Other phone info (what the adb prompt can read

Code:

------------------------------------------------------------------------------------------------
 Turn-on the Phone Goto 'Settings > Application > Development' 
 And Check 'Usb Debugging' Then Connect Usb Cable To Phone And Install Needed Driver.
------------------------------------------------------------------------------------------------
 Prepairing ...OK
 Device Found!
 Model                : GT-N7000
 Manufacturer         : samsung
 Brand                : samsung
 CPU info1:           : armeabi-v7a
 CPU info2:           : armeabi
 Serial No.           : NULL
 Baseband Version     : NULL
 GSM Baseband Version : N7000XXLPT
 Bootloader Version   : unknown
 Build Version        : 4.0.3
 Country              : GB
 Language             : en
 CID                  : NULL
 Build ID             : IML74K
 Time-Zone            : NULL
 IMEI                 : NULL
 IMSI                 : NULL
 Root User            : se.infra
 Sales Code           : KOR
 Country Code         : KOR
 Built Date           : Fri May  4 04:23:15 KST 2012
------------------------------------------------------------------------------------------------
 Operation Completed
 Operation Time: 00:00:05

If I just want to root a device, what mean the "[Err:2] Cannot stat!" error? And how can I get fix it?

**Asansam dongle** · 06-13-2012, 10:12

Quote:

Example, I tried read the flash on a fully working N7000, and the result:

please check model list first

Quote:

Add Read Full Flash
Samsung GT-I9000
Samsung GT-I9000B
Samsung GT-I9000L
Samsung GT-I9000M
Samsung GT-I9000T
Samsung GT-I9003
Samsung GT-I9003B
Samsung GT-I9003L
Samsung GT-I9008
Samsung GT-P1000
Samsung GT-P1000L
Samsung GT-P1000M
Samsung GT-P1000N
Samsung GT-P1000R
Samsung GT-P1000T
Samsung GT-T959
Samsung GT-T959D
Samsung GT-T959V
Samsung GT-T959P

n7000 not supported

Quote:

If I just want to root a device, what mean the "[Err:2] Cannot stat!" error? And how can I get fix it?

your problem is root only
you must root by kernel (4.0.3 version)

manual for you only:
downgrade phone to 2.3.5
root phone
repair by ub tools
change imei by z3x or other samsung boxs
1000% working (please dont try and dont send any post)

laduka · 06-14-2012, 11:21

here is my problemm ,please see it and help to sove

when i press unlock button programm shut down

video 2012 06 14 14 04 19 - YouTube

**Asansam dongle** · 06-14-2012, 12:23

Quote:

here is my problemm ,please see it and help to sove

when i press unlock button programm shut down

video 2012 06 14 14 04 19 - YouTube

working good
please unistall and install agian

laduka · 06-14-2012, 12:56

Quote:

Originally Posted by Asansam dongle

working good
please unistall and install agian

ive reistaled windows,install sasnsam but problemm not solved,after pressing only unlock button shut down

akhil_bbsr · 06-14-2012, 13:35

Quote:

Originally Posted by Asansam dongle

you can download all flash file from
.:AsanGSM-MobileFile-MainPage:.

site is vary slow , i am unable to access

**Asansam dongle** · 06-14-2012, 15:37

Please install 1.0.8 and use shell
asansam shell is very update and high speed

teddy926 · 06-16-2012, 22:38

las post i said that i saw here, I don' t know if you learned what I wrot. I beg you the answer man. all that I m seing here, i try to do it, whith my dongle but sorry. I try to flash a phone but never see a litle wdow be open that for it i wrot. and other problem
a teamviewer is real or joke every day i'm online but never see this joke be online, remember that i bought asansam dongle for helping me. but till now i receive many erro that i don't know where it coming, but other dongle and box are working very well. help me pls. i' have vers 1.8.0

teddy926 · 06-17-2012, 00:11

i'm using Avira antivirus secure.

NKhan_Gsm · 06-17-2012, 10:10

I am a New user of ASANBOX I want to Activate and Register but it always give Erorr :

Dongle Not Found (Err:0x14200) When I select Activator Although I disconnected all other dongles and boxes from PC ,disabled AV and removed and reinstalled drivers.
Please help and guide me ASAN Team .

WBR

**Asansam dongle** · 06-17-2012, 10:50

Quote:

I am a New user of ASANBOX I want to Activate and Register but it always give Erorr :

Dongle Not Found (Err:0x14200) When I select Activator Although I disconnected all other dongles and boxes from PC ,disabled AV and removed and reinstalled drivers.
Please help and guide me ASAN Team .

WBR

please read manual first
Asansam box no need active
unikey need active onlyyyyyy
install 1.8.1 version
run and press on smart card
★★★★★★★★★★Please read this post before installing asansam★★★★★★★★★★

thyagu2k · 06-18-2012, 12:22

please help i install asansam new ver 1.8.1.when i open exe then close

this error

**Asansam dongle** · 06-18-2012, 12:51

Quote:

please help i install asansam new ver 1.8.1.when i open exe then close

this error

please test 1.8.0 and send report here

06-12-2012, 14:39	#16 (permalink)
prody Junior Member Join Date: Jun 2012 Posts: 2 Member: 1770909 Status: Offline Thanks: 0 Thanked 0 Times in 0 Posts	Hi guys! First of all, I just now bought the key, and what I (will) can do with it, is realy amazing, and I realy appriciate your hard work! But... I have a N7000 and the Galaxy S2. Both of them is have an "Unknow Phone" problem.... :/ I tried root, because have to if I want to use the UBTool. I turn the debugging mode, and all of driver installed (The PC see the phone as ADB interface), but when I try to use root as ADB action, I always get the same error: Code: ------------------------------------------------------------------------------------------------ Turn-on the Phone Goto 'Settings > Application > Development' And Check 'Usb Debugging' Then Connect Usb Cable To Phone And Install Needed Driver. ------------------------------------------------------------------------------------------------ Prepairing ...OK Device Found! Root Procedure Started! Refreshing ... OK Prepairing ROOTFILE1(STEP 1) ... Fail! [Err:2] Cannot stat! Operation Completed Operation Time: 00:00:04 What I can do more? Or what I did wrong?

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
thread	Thread Starter	Forum	Replies	Last Post
How can I do a Welcome note for my 6110 a dosn't have any one ?	Viper	Nokia Legacy Phones ( DCT-1 , DCT-2 , DCT-3 , DCT-L )	7	07-18-2012 07:57
Sim card sleep mode problem with 6130	ratzfatz	Nokia Legacy Phones ( DCT-1 , DCT-2 , DCT-3 , DCT-L )	4	05-22-2012 11:13
Help with 6110	paulomt1	Nokia Legacy Phones ( DCT-1 , DCT-2 , DCT-3 , DCT-L )	3	05-25-2009 16:29
Netmonitor with FBus????	ratzfatz	Nokia Legacy Phones ( DCT-1 , DCT-2 , DCT-3 , DCT-L )	4	06-09-1999 17:04

06-14-2012, 11:21	#20 (permalink)
laduka No Life Poster Join Date: Oct 2005 Location: unlocking market Posts: 1,212 Member: 194939 Status: Offline Sonork: 100.1613858 Thanks: 153 Thanked 509 Times in 321 Posts	here is my problemm ,please see it and help to sove when i press unlock button programm shut down video 2012 06 14 14 04 19 - YouTube

06-14-2012, 15:37	#24 (permalink)
Asansam dongle Product Manager Join Date: Dec 2011 Location: Iran Posts: 3,033 Member: 1707100 Status: Offline Sonork: 1590245/1587178 Thanks: 502 Thanked 8,372 Times in 799 Posts	Please install 1.0.8 and use shell asansam shell is very update and high speed

06-16-2012, 22:38	#25 (permalink)
teddy926 Junior Member Join Date: Jun 2012 Posts: 7 Member: 1770548 Status: Offline Sonork: 926053999 Thanks: 0 Thanked 0 Times in 0 Posts	las post i said that i saw here, I don' t know if you learned what I wrot. I beg you the answer man. all that I m seing here, i try to do it, whith my dongle but sorry. I try to flash a phone but never see a litle wdow be open that for it i wrot. and other problem a teamviewer is real or joke every day i'm online but never see this joke be online, remember that i bought asansam dongle for helping me. but till now i receive many erro that i don't know where it coming, but other dongle and box are working very well. help me pls. i' have vers 1.8.0

06-17-2012, 00:11	#26 (permalink)
teddy926 Junior Member Join Date: Jun 2012 Posts: 7 Member: 1770548 Status: Offline Sonork: 926053999 Thanks: 0 Thanked 0 Times in 0 Posts	i'm using Avira antivirus secure.

06-17-2012, 10:10	#27 (permalink)
NKhan_Gsm No Life Poster Join Date: Aug 2011 Location: Afghanistan Posts: 717 Member: 1646177 Status: Offline Sonork: 100.1604654 Thanks: 170 Thanked 207 Times in 121 Posts	I am a New user of ASANBOX I want to Activate and Register but it always give Erorr : Dongle Not Found (Err:0x14200) When I select Activator Although I disconnected all other dongles and boxes from PC ,disabled AV and removed and reinstalled drivers. Please help and guide me ASAN Team . WBR