I9500 - GSM-Forum

mqamar · 10-29-2014, 14:38

-----------------------------------------------------------------------------------------------
Turn-on the Phone Goto 'Settings > Application > Development'
And Check 'Usb Debugging' Then Connect Usb Cable To Phone And Install Needed Driver.
-----------------------------------------------------------------------------------------------
Prepairing ...OK
Device Found!
Reading Phone Informations ...
Model : GT-I9500
Android Version : 4.4.2
PDA Version : I9500XXUFNC1
CS Version : I9500YDDFNC2
Phone Version : I9500DDUFNA4
IMEI : NULL
Checking Root ...OK
Phone Root OK. Continue..
Disabling Security ...Done!
Rebooting... OK!
Now Remove USB Cable and Wait Phone Powering Up Completely (Media Scanners Passed) Then insert UART cable to Phone to Continue
Delay 60 Seconds...
Searching for phone on COM3 ...Fail!
Phone not found!
Operation Completed
Operation Time: 00:05:04

**Asansam Box** · 10-29-2014, 14:41

Need enable use uart in setting and buy uart cable(s7070 red gpg)for step 2(set port before press imei button)

mqamar · 10-30-2014, 16:47

Quote:

Originally Posted by Asansam Box

Need enable use uart in setting and buy uart cable(s7070 red gpg)for step 2(set port before press imei button)

Phone not found problem sir

**Asansam Box** · 10-30-2014, 17:14

http://forum.gsmhosting.com/vbb/10645535-post2.html

mqamar · 10-30-2014, 17:20

sir all setting ok
but uart cable phone not found

atiq022 · 10-30-2014, 17:23

use c3303 rj45 cable and choice com box serial port

10-29-2014, 14:38	#1 (permalink)
mqamar Major Poster Join Date: Oct 2007 Posts: 42 Member: 616108 Status: Offline Thanks Meter: 5	I9500 ----------------------------------------------------------------------------------------------- Turn-on the Phone Goto 'Settings > Application > Development' And Check 'Usb Debugging' Then Connect Usb Cable To Phone And Install Needed Driver. ----------------------------------------------------------------------------------------------- Prepairing ...OK Device Found! Reading Phone Informations ... Model : GT-I9500 Android Version : 4.4.2 PDA Version : I9500XXUFNC1 CS Version : I9500YDDFNC2 Phone Version : I9500DDUFNA4 IMEI : NULL Checking Root ...OK Phone Root OK. Continue.. Disabling Security ...Done! Rebooting... OK! Now Remove USB Cable and Wait Phone Powering Up Completely (Media Scanners Passed) Then insert UART cable to Phone to Continue Delay 60 Seconds... Searching for phone on COM3 ...Fail! Phone not found! Operation Completed Operation Time: 00:05:04

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

10-29-2014, 14:41	#2 (permalink)
Asansam Box Product Manager Join Date: Apr 2013 Location: IRAN Age: 38 Posts: 5,842 Member: 1911891 Status: Offline Thanks Meter: 6,241	Need enable use uart in setting and buy uart cable(s7070 red gpg)for step 2(set port before press imei button)

10-30-2014, 17:14	#4 (permalink)
Asansam Box Product Manager Join Date: Apr 2013 Location: IRAN Age: 38 Posts: 5,842 Member: 1911891 Status: Offline Thanks Meter: 6,241	http://forum.gsmhosting.com/vbb/10645535-post2.html

10-30-2014, 17:20	#5 (permalink)
mqamar Major Poster Join Date: Oct 2007 Posts: 42 Member: 616108 Status: Offline Thanks Meter: 5	sir all setting ok but uart cable phone not found

10-30-2014, 17:23	#6 (permalink)
atiq022 No Life Poster Join Date: Sep 2007 Location: morocco Posts: 587 Member: 587405 Status: Offline Sonork: 100.1681610 Thanks Meter: 151	use c3303 rj45 cable and choice com box serial port