N7100 Sim Card Not Register On Network repair successfully[REPORT OK] - GSM-Forum

**aZimBahar** · 09-17-2013, 08:06

N7100 Sim Card Not Register On Network Problem
IMEI: 004999010640000

Quote:

Model : GT-N7100
Android Version : 4.1.2
PDA Version : N7100XXDMF2
CS Version : N7100OLBDMD2
Phone Version : NULL
IMEI : NULL
Checking Root ...OK
Phone Root OK. Continue..
Disabling Security ...Done!
Rebooting... OK!

Now Remove USB Cable then Insert Micro UART Cable to Phone to Continue..
Delay 40 Seconds...
Searching for phone on COM10 ...Fail!
Phone not found!

Always Uart Cable Not Found !

**Asansam Box** · 09-17-2013, 08:36

Enable uart in setting and try again(this problem is uart connectio or cable or modem port)

**aZimBahar** · 09-17-2013, 09:23

Quote:

Originally Posted by Asansam Box

Enable uart in setting and try again(this problem is uart connectio or cable or modem port)

I Use c3303k Cable Also Make A New Cable But Same
I Make Cable Like This

How To Enable Uart From Setting ?
dail *#7284# set uart to modem save and resart ?

**Asansam Box** · 09-17-2013, 09:54

Enable uart mode(1)in asansam setting(open asansam and goto setting) and then try again

**aZimBahar** · 09-17-2013, 10:51

Quote:

Originally Posted by Asansam Box

Enable uart mode(1)in asansam setting(open asansam and goto setting) and then try again

Same problem . How To Solved ?

**Asansam Box** · 09-17-2013, 11:58

This is error connection(phone modem/baseband) and need try again only

ch.- · 09-17-2013, 12:24

If you have no baseband, uart connection will not work.
You have repair baseband first

**aZimBahar** · 09-17-2013, 12:25

Quote:

Originally Posted by Asansam Box

This is error connection(phone modem/baseband) and need try again only

I Already Try Another Time But Always Same
Phone Baseband Ok And Imei Also Ok But Show :IMEI: 004999010640000
So Sim Card Not Register On Network

*#1234# Phone Modem CSC Ok So This Phone 100% Software

I Use c3303k Cable Also Make New Cable But Problem Still

Phone Version 4.1.2 Need Downgread ?

**aZimBahar** · 09-17-2013, 13:05

Brother Look My Cable 100% Ok
S3850 Detected

Quote:

Selected model: S3850
Selected com port: COM10
Selected speed port: 921600
Phone must be ON and use z3x autoignition micro-uart cable
Phone IMEI: 35923804428485 /2
Reset phone code to - > 00000000
Reset sim block code to - > 00000000
Elapsed time: 3 second, sw ver: 3.5.0040

So I Think Have Any Other Problem

**Asansam Box** · 09-17-2013, 13:56

I think your problem is phone modem only

**aZimBahar** · 09-17-2013, 14:09

Quote:

Originally Posted by Asansam Box

I think your problem is phone modem only

Bro How To Solved ? Need Any Spicily Firmware For Imei Repair ?
Modem Phone Csc Show Ok To *#1234# ,baseband also ok
I Do Setting *#7284# Then Uart To Modem & Usb To PDA
Also Over confirm My Cable Ok

Quote:

Selected model: S5350
Selected port: COM10 Z3X BOX Serial Port
Selected port speed: 115200
Searching Samsung modem... not found
Checking phone on COM10
Reading phone info...
Reading IMEI... OK
IMEI: 0
Done with Samsung Tool v.15.5

Customer Try To Update By His Self , After Update No Network Register .IMEI: 004999010640000

**aZimBahar** · 09-18-2013, 04:44

Problem Solved By Specially Firmware

Thread Can Be Close

mobi_soft · 10-05-2013, 20:02

which firmware u tried..

plz share for halp
others....

zatman · 10-05-2013, 21:12

Downgrade to 4.0.3 and write efs ,after imei repaire.BR

yudibanjar · 10-16-2013, 13:46

Quote:

Originally Posted by ..::One-Man::..

Problem Solved By Specially Firmware

Thread Can Be Close

what the special firmware?share please..

09-17-2013, 08:36	#2 (permalink)
Asansam Box Product Manager Join Date: Apr 2013 Location: IRAN Age: 38 Posts: 5,842 Member: 1911891 Status: Offline Thanks Meter: 6,241	Enable uart in setting and try again(this problem is uart connectio or cable or modem port)

09-17-2013, 09:54	#4 (permalink)
Asansam Box Product Manager Join Date: Apr 2013 Location: IRAN Age: 38 Posts: 5,842 Member: 1911891 Status: Offline Thanks Meter: 6,241	Enable uart mode(1)in asansam setting(open asansam and goto setting) and then try again

09-17-2013, 11:58	#6 (permalink)
Asansam Box Product Manager Join Date: Apr 2013 Location: IRAN Age: 38 Posts: 5,842 Member: 1911891 Status: Offline Thanks Meter: 6,241	This is error connection(phone modem/baseband) and need try again only

09-17-2013, 12:24	#7 (permalink)
ch.- Junior Member Join Date: Sep 2013 Posts: 6 Member: 2017558 Status: Offline Sonork: 100.1640894 Thanks Meter: 0	If you have no baseband, uart connection will not work. You have repair baseband first

09-17-2013, 13:56	#10 (permalink)
Asansam Box Product Manager Join Date: Apr 2013 Location: IRAN Age: 38 Posts: 5,842 Member: 1911891 Status: Offline Thanks Meter: 6,241	I think your problem is phone modem only

09-18-2013, 04:44	#12 (permalink)
aZimBahar Product Manager Join Date: Dec 2009 Location: CEO.of.ROMDevelopers Age: 32 Posts: 16,030 Member: 1174508 Status: Offline Sonork: 100.1593820 Thanks Meter: 11,979	Problem Solved By Specially Firmware Thread Can Be Close

10-05-2013, 20:02	#13 (permalink)
mobi_soft No Life Poster Join Date: Sep 2009 Location: Hello Online Service Posts: 1,941 Member: 1126941 Status: Offline Sonork: 100.1672154 Thanks Meter: 2,488	which firmware u tried.. plz share for halp others....

10-05-2013, 21:12	#14 (permalink)
zatman Freak Poster Join Date: Feb 2009 Location: spain Posts: 474 Member: 980172 Status: Offline Thanks Meter: 85	Downgrade to 4.0.3 and write efs ,after imei repaire.BR