samsung n7000 repair unknown baseband succefully[REPORT OK] - GSM-Forum

klmamn · 05-21-2012, 08:27

hi all,
i want to buy asansam but first i want know can this donlge repair null imei of note n7000 failed from z3x
if yes then plz tel me reseller from Pakistan

dky_tel · 05-21-2012, 08:38

yes supported imie reapair http://forum.gsmhosting.com/vbb/f716...world-1464925/

reseller : http://forum.gsmhosting.com/vbb/f716...eller-1406422/

klmamn · 05-22-2012, 10:26

ok now i have asansam dongle
soo plz guide me step by step to repair imei of note n7000
thanx an advance

sajidali · 05-22-2012, 11:24

Check this brother
http://forum.gsmhosting.com/vbb/f716...world-1464925/

klmamn · 05-22-2012, 11:28

helooooooooo is there anybody

Asansam dongle · 05-22-2012, 11:41

please root phone and check all method in ubtool

klmamn · 05-22-2012, 11:47

Quote:

Originally Posted by sajidali

Check this brother
http://forum.gsmhosting.com/vbb/f716...world-1464925/

bro there is not soo clear instructions

klmamn · 05-22-2012, 11:59

basband repaired but imei remain wrong starts from 004999010640000

now what to do z3x not repairing it
here is ubtool log

UBTool Rev1.0.3 By ASAN-GSM TEAM
---------------------------------------------
Important Note:
Before Using This Tool Check and Be Sure :
1) Your Phone Has Complete ROOT Access
2) Your Phone Must be in AirPlane Mode
-------------------------------------------------------------------------------
Turn-on the Phone Goto ' Settings > Application > Development'
And Check 'Usb Debugging' Then Connect Usb Cable To Phone And
Install Needed Driver.
-------------------------------------------------------------------------------
Prepairing ...OK
Device Found!
Prepairing Green Method ...OK
Repairing EFS ... OK
Finalizing EFS ... OK
Rebooting ... OK
Phone Reset Done!
--------------------------------------------
Operation Completed
Operation Time: 00:00:22
-------------------------------------------------------------------------------
Turn-on the Phone Goto ' Settings > Application > Development'
And Check 'Usb Debugging' Then Connect Usb Cable To Phone And
Install Needed Driver.
-------------------------------------------------------------------------------
Prepairing ...OK
Device Found!
Prepairing NV DATA ... OK
Cleaning NV DATA ... OK
Rebooting ... OK
Device Found!
Initializing NVM ... OK
Downloading NVM ... OK
Rebooting ... OK
Phone Reset Done!
--------------------------------------------
Operation Completed
Operation Time: 00:00:40

and here is z3x Failure log

-------------------------- 22.5.2012_15-35-8 --------------------------
Count supported models - 290
Starting ADB Server... OK
Checking ROOT... FALSE
Reading Phone Info... OK
Android Version: 2.3.5
Model: GT-N7000
Product Code: Not Active
Phone Version: N7000XXLA4
PDA Version: N7000XXKJ1
IMEI: 004999010640000
Rooting Phones... OK
Checking EFS... Present
Rebooting... OK
Waiting For Reboot Finish... OK
Rooting Phones... OK
Checking NV Data... OK
Searching Samsung USB Modem... Not Found
Done with Samsung Tool ver 11.9

Asansam dongle · 05-22-2012, 12:27

unknow baseband and dont show imei problem repair successfully (by ubtool first in world and very easy):-)
you must try change imei by other tools
asansam not supported

klmamn · 05-22-2012, 14:05

thanx asansam my problem solved
this is pending from last two month finally i got dongle and after two hrs i successfully repaired thanx again asansam dongle

here is log from z3x after repairing basband change imei

Starting ADB Server... OK
Checking ROOT... FALSE
Reading Phone Info... OK
Android Version: 2.3.5
Model: GT-N7000
Product Code: Not Active
Phone Version: N7000XXLA4
PDA Version: N7000XXKJ1
IMEI: 004999010640000
Rooting Phones... OK
Reading Data From Phone... OK
Writing Data To Phone... OK
Searching Samsung USB Modem... Detected COM10
Bypass MSL... Error (1)
Done with Samsung Tool ver 11.9
Starting ADB Server... OK
Checking ROOT... TRUE
Reading Data From Phone... OK
Writing Data To Phone... OK
Searching Samsung USB Modem... Detected COM10
Bypass MSL... OK
Repairing IMEI... OK
New IMEI: 359616041627779
Rebooting... OK
Done with Samsung Tool ver 11.9

sanpreet_singh · 06-19-2012, 12:26

ok done
basband repaired but imei remain wrong starts from 004999010640000

now what to do z3x not repairing it
here is ubtool log

UBTool Rev1.0.3 By ASAN-GSM TEAM
---------------------------------------------
Important Note:
Before Using This Tool Check and Be Sure :
1) Your Phone Has Complete ROOT Access
2) Your Phone Must be in AirPlane Mode
-------------------------------------------------------------------------------
Turn-on the Phone Goto ' Settings > Application > Development'
And Check 'Usb Debugging' Then Connect Usb Cable To Phone And
Install Needed Driver.
-------------------------------------------------------------------------------
Prepairing ...OK
Device Found!
Prepairing Blue Method ...OK
Repairing EFS ... OK
Finalizing EFS ... OK
Rebooting ... OK
Phone Reset Done!
--------------------------------------------
Operation Completed
Operation Time: 00:00:22
-------------------------------------------------------------------------------
Turn-on the Phone Goto ' Settings > Application > Development'
And Check 'Usb Debugging' Then Connect Usb Cable To Phone And
Install Needed Driver.
-------------------------------------------------------------------------------
Prepairing ...OK
Device Found!
Prepairing NV DATA ... OK
Cleaning NV DATA ... OK
Rebooting ... OK
Device Found!
Initializing NVM ... OK
Downloading NVM ... OK
Rebooting ... OK
Phone Reset Done!
--------------------------------------------
Operation Completed
Operation Time: 00:00:40

Starting ADB Server... OK
Checking ROOT... FALSE
Reading Phone Info... OK
Android Version: 2.3.5
Model: GT-N7000
Product Code: Not Active
Phone Version: N7000XXLA4
PDA Version: N7000XXKJ1
IMEI: 004999010640000
Rooting Phones... OK
Reading Data From Phone... OK
Writing Data To Phone... OK
Searching Samsung USB Modem... Detected COM10
Bypass MSL... Error (1)
Done with Samsung Tool ver 11.9
Starting ADB Server... OK
Checking ROOT... TRUE
Reading Data From Phone... OK
Writing Data To Phone... OK
Searching Samsung USB Modem... Detected COM10
Bypass MSL... OK
Repairing IMEI... OK
New IMEI: 35xxxxxxxxxxxxx
Rebooting... OK
Done with Samsung Tool ver 11.9

sparshman · 11-28-2014, 14:29

Before Using This Section Check and Be Sure :
1) Your Phone Has Complete ROOT Access
2) Your Phone Must be in AirPlane Mode
3) BusyBox Must be Installed in Your Phone
-----------------------------------------------------------------------------------------------
Turn-on the Phone Goto 'Settings > Application > Development'
And Check 'Usb Debugging' Then Connect Usb Cable To Phone And Install Needed Driver.

Note: Phone Must be Rooted and be in AirPlane Mode
For Restore PB Operation You Must Install Busybox in additional of all this
-----------------------------------------------------------------------------------------------
Prepairing ...OK
Device Found!
Reading Phone Informations ...

Model : GT-N7000
Android Version : 4.0.4
PDA Version : N7000DDLR9
CS Version : N7000ODDLR3
Phone Version : NULL
IMEI : NULL
Baseband Version : NULL
GSM Baseband Version : NULL
Checking Root ...OK
Phone Root OK. Continue..
STEP1 ... OK
STEP2 ... OK
Phone Reset Done!
Operation Completed
Operation Time: 00:00:12

after this remain same unknown baseband
and imei blank anyone has proper step i m using asansam 2.5.7 beta ver

PARMATMA · 12-29-2014, 13:55

Quote:

Originally Posted by klmamn

thanx asansam my problem solved
this is pending from last two month finally i got dongle and after two hrs i successfully repaired thanx again asansam dongle

here is log from z3x after repairing basband change imei

Starting ADB Server... OK
Checking ROOT... FALSE
Reading Phone Info... OK
Android Version: 2.3.5
Model: GT-N7000
Product Code: Not Active
Phone Version: N7000XXLA4
PDA Version: N7000XXKJ1
IMEI: 004999010640000
Rooting Phones... OK
Reading Data From Phone... OK
Writing Data To Phone... OK
Searching Samsung USB Modem... Detected COM10
Bypass MSL... Error (1)
Done with Samsung Tool ver 11.9
Starting ADB Server... OK
Checking ROOT... TRUE
Reading Data From Phone... OK
Writing Data To Phone... OK
Searching Samsung USB Modem... Detected COM10
Bypass MSL... OK
Repairing IMEI... OK
New IMEI: 359616041627779
Rebooting... OK
Done with Samsung Tool ver 11.9

How u solve unkonwn baseband through asansam

I have same problem in my n7100

**Asansam Box** · 12-29-2014, 20:54

http://forum.gsmhosting.com/vbb/8433711-post6.html

05-21-2012, 08:27	#1 (permalink)
klmamn No Life Poster Join Date: Mar 2009 Location: Pakistan Bahawalpur Posts: 1,195 Member: 986273 Status: Offline Thanks Meter: 397	samsung n7000 repair unknown baseband succefully[REPORT OK] hi all, i want to buy asansam but first i want know can this donlge repair null imei of note n7000 failed from z3x if yes then plz tel me reseller from Pakistan Last edited by dr_moosavi; 05-31-2012 at 10:04.

11-28-2014, 14:29	#12 (permalink)
sparshman Freak Poster Join Date: Jun 2005 Age: 46 Posts: 172 Member: 150534 Status: Offline Thanks Meter: 29	Before Using This Section Check and Be Sure : 1) Your Phone Has Complete ROOT Access 2) Your Phone Must be in AirPlane Mode 3) BusyBox Must be Installed in Your Phone ----------------------------------------------------------------------------------------------- Turn-on the Phone Goto 'Settings > Application > Development' And Check 'Usb Debugging' Then Connect Usb Cable To Phone And Install Needed Driver. Note: Phone Must be Rooted and be in AirPlane Mode For Restore PB Operation You Must Install Busybox in additional of all this ----------------------------------------------------------------------------------------------- Prepairing ...OK Device Found! Reading Phone Informations ... Model : GT-N7000 Android Version : 4.0.4 PDA Version : N7000DDLR9 CS Version : N7000ODDLR3 Phone Version : NULL IMEI : NULL Baseband Version : NULL GSM Baseband Version : NULL Checking Root ...OK Phone Root OK. Continue.. STEP1 ... OK STEP2 ... OK Phone Reset Done! Operation Completed Operation Time: 00:00:12 after this remain same unknown baseband and imei blank anyone has proper step i m using asansam 2.5.7 beta ver Last edited by sparshman; 11-28-2014 at 14:35.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
lots of service manuals Nokia, Siemens Sony Samsung etc.	-=KnOeFz=-	GSM Mobile Links	4	11-16-2011 08:42
Samsung service soft.	fido	Samsung Flashers, Software, Firmware.	4	01-20-2011 08:17
I need pinout for samsung a100	laiyc	x1x to x45/x50	1	03-31-2001 23:47
Samsung SGH-200 (Help me -I need eeprom.)	jonwillow	Old Ericsson Phones & Sony Phones	0	06-23-2000 09:38
I Trade software for Samsung	hercules	Old Ericsson Phones & Sony Phones	0	05-27-1999 14:14

05-21-2012, 08:38	#2 (permalink)
dky_tel No Life Poster Join Date: Feb 2005 Location: (United States Of GINGOOG CITY Age: 47 Posts: 1,613 Member: 120328 Status: Offline Thanks Meter: 243	yes supported imie reapair http://forum.gsmhosting.com/vbb/f716...world-1464925/ reseller : http://forum.gsmhosting.com/vbb/f716...eller-1406422/

05-22-2012, 10:26	#3 (permalink)
klmamn No Life Poster Join Date: Mar 2009 Location: Pakistan Bahawalpur Posts: 1,195 Member: 986273 Status: Offline Thanks Meter: 397	ok now i have asansam dongle soo plz guide me step by step to repair imei of note n7000 thanx an advance

05-22-2012, 11:24	#4 (permalink)
sajidali No Life Poster Join Date: Sep 2005 Location: PAKISTAN Age: 39 Posts: 1,732 Member: 181886 Status: Offline Sonork: 100.1579817 Thanks Meter: 1,007	Check this brother http://forum.gsmhosting.com/vbb/f716...world-1464925/

05-22-2012, 11:28	#5 (permalink)
klmamn No Life Poster Join Date: Mar 2009 Location: Pakistan Bahawalpur Posts: 1,195 Member: 986273 Status: Offline Thanks Meter: 397	helooooooooo is there anybody

05-22-2012, 11:41	#6 (permalink)
Asansam dongle No Life Poster Join Date: Dec 2011 Location: Iran Posts: 3,137 Member: 1707100 Status: Offline Sonork: 100.1590245 Thanks Meter: 13,595	please root phone and check all method in ubtool

05-22-2012, 11:59	#8 (permalink)
klmamn No Life Poster Join Date: Mar 2009 Location: Pakistan Bahawalpur Posts: 1,195 Member: 986273 Status: Offline Thanks Meter: 397	basband repaired but imei remain wrong starts from 004999010640000 now what to do z3x not repairing it here is ubtool log UBTool Rev1.0.3 By ASAN-GSM TEAM --------------------------------------------- Important Note: Before Using This Tool Check and Be Sure : 1) Your Phone Has Complete ROOT Access 2) Your Phone Must be in AirPlane Mode ------------------------------------------------------------------------------- Turn-on the Phone Goto ' Settings > Application > Development' And Check 'Usb Debugging' Then Connect Usb Cable To Phone And Install Needed Driver. ------------------------------------------------------------------------------- Prepairing ...OK Device Found! Prepairing Green Method ...OK Repairing EFS ... OK Finalizing EFS ... OK Rebooting ... OK Phone Reset Done! -------------------------------------------- Operation Completed Operation Time: 00:00:22 ------------------------------------------------------------------------------- Turn-on the Phone Goto ' Settings > Application > Development' And Check 'Usb Debugging' Then Connect Usb Cable To Phone And Install Needed Driver. ------------------------------------------------------------------------------- Prepairing ...OK Device Found! Prepairing NV DATA ... OK Cleaning NV DATA ... OK Rebooting ... OK Device Found! Initializing NVM ... OK Downloading NVM ... OK Rebooting ... OK Phone Reset Done! -------------------------------------------- Operation Completed Operation Time: 00:00:40 and here is z3x Failure log -------------------------- 22.5.2012_15-35-8 -------------------------- Count supported models - 290 Starting ADB Server... OK Checking ROOT... FALSE Reading Phone Info... OK Android Version: 2.3.5 Model: GT-N7000 Product Code: Not Active Phone Version: N7000XXLA4 PDA Version: N7000XXKJ1 IMEI: 004999010640000 Rooting Phones... OK Checking EFS... Present Rebooting... OK Waiting For Reboot Finish... OK Rooting Phones... OK Checking NV Data... OK Searching Samsung USB Modem... Not Found Done with Samsung Tool ver 11.9

05-22-2012, 12:27	#9 (permalink)
Asansam dongle No Life Poster Join Date: Dec 2011 Location: Iran Posts: 3,137 Member: 1707100 Status: Offline Sonork: 100.1590245 Thanks Meter: 13,595	unknow baseband and dont show imei problem repair successfully (by ubtool first in world and very easy):-) you must try change imei by other tools asansam not supported

05-22-2012, 14:05	#10 (permalink)
klmamn No Life Poster Join Date: Mar 2009 Location: Pakistan Bahawalpur Posts: 1,195 Member: 986273 Status: Offline Thanks Meter: 397	thanx asansam my problem solved this is pending from last two month finally i got dongle and after two hrs i successfully repaired thanx again asansam dongle here is log from z3x after repairing basband change imei Starting ADB Server... OK Checking ROOT... FALSE Reading Phone Info... OK Android Version: 2.3.5 Model: GT-N7000 Product Code: Not Active Phone Version: N7000XXLA4 PDA Version: N7000XXKJ1 IMEI: 004999010640000 Rooting Phones... OK Reading Data From Phone... OK Writing Data To Phone... OK Searching Samsung USB Modem... Detected COM10 Bypass MSL... Error (1) Done with Samsung Tool ver 11.9 Starting ADB Server... OK Checking ROOT... TRUE Reading Data From Phone... OK Writing Data To Phone... OK Searching Samsung USB Modem... Detected COM10 Bypass MSL... OK Repairing IMEI... OK New IMEI: 359616041627779 Rebooting... OK Done with Samsung Tool ver 11.9

06-19-2012, 12:26	#11 (permalink)
sanpreet_singh Freak Poster Join Date: Feb 2006 Location: Melbourne,Vic,Australia Age: 47 Posts: 166 Member: 236236 Status: Offline Thanks Meter: 16	ok done basband repaired but imei remain wrong starts from 004999010640000 now what to do z3x not repairing it here is ubtool log UBTool Rev1.0.3 By ASAN-GSM TEAM --------------------------------------------- Important Note: Before Using This Tool Check and Be Sure : 1) Your Phone Has Complete ROOT Access 2) Your Phone Must be in AirPlane Mode ------------------------------------------------------------------------------- Turn-on the Phone Goto ' Settings > Application > Development' And Check 'Usb Debugging' Then Connect Usb Cable To Phone And Install Needed Driver. ------------------------------------------------------------------------------- Prepairing ...OK Device Found! Prepairing Blue Method ...OK Repairing EFS ... OK Finalizing EFS ... OK Rebooting ... OK Phone Reset Done! -------------------------------------------- Operation Completed Operation Time: 00:00:22 ------------------------------------------------------------------------------- Turn-on the Phone Goto ' Settings > Application > Development' And Check 'Usb Debugging' Then Connect Usb Cable To Phone And Install Needed Driver. ------------------------------------------------------------------------------- Prepairing ...OK Device Found! Prepairing NV DATA ... OK Cleaning NV DATA ... OK Rebooting ... OK Device Found! Initializing NVM ... OK Downloading NVM ... OK Rebooting ... OK Phone Reset Done! -------------------------------------------- Operation Completed Operation Time: 00:00:40 Starting ADB Server... OK Checking ROOT... FALSE Reading Phone Info... OK Android Version: 2.3.5 Model: GT-N7000 Product Code: Not Active Phone Version: N7000XXLA4 PDA Version: N7000XXKJ1 IMEI: 004999010640000 Rooting Phones... OK Reading Data From Phone... OK Writing Data To Phone... OK Searching Samsung USB Modem... Detected COM10 Bypass MSL... Error (1) Done with Samsung Tool ver 11.9 Starting ADB Server... OK Checking ROOT... TRUE Reading Data From Phone... OK Writing Data To Phone... OK Searching Samsung USB Modem... Detected COM10 Bypass MSL... OK Repairing IMEI... OK New IMEI: 35xxxxxxxxxxxxx Rebooting... OK Done with Samsung Tool ver 11.9

12-29-2014, 20:54	#14 (permalink)
Asansam Box Product Manager Join Date: Apr 2013 Location: IRAN Age: 38 Posts: 5,842 Member: 1911891 Status: Offline Thanks Meter: 6,241	http://forum.gsmhosting.com/vbb/8433711-post6.html