need mfi-24487-005 - GSM-Forum

iwanhwk · 05-15-2012, 08:42

hello supporter.....can u give mfi-24487-005? i need that file..thank u

regards,

android unbrik · 05-15-2012, 10:47

Quote:

Originally Posted by iwanhwk

hello supporter.....can u give mfi-24487-005? i need that file..thank u

regards,

hallo bro, im not a supporter.im only zzkey user. check ur pm, already there ur mfi

**elcapitel** · 05-15-2012, 12:45

Hello friend. Please check ur pm

Best Regards
zZ-Team

Quote:

Originally Posted by iwanhwk

hello supporter.....can u give mfi-24487-005? i need that file..thank u

regards,

iwanhwk · 05-15-2012, 13:57

thank you all.......but i can find correct sfi for that mfi,phone already in conditions factory os,

**elcapitel** · 05-15-2012, 14:17

Put here ur PRD-XXXXX-XXX

Br
zZ-Team

Quote:

Originally Posted by iwanhwk

thank you all.......but i can find correct sfi for that mfi,phone already in conditions factory os,

iwanhwk · 05-15-2012, 14:32

cant find prd coz the sticker is gone...i already flash sfi from you but always fail sir.....hardware id mismatch sir,

**elcapitel** · 05-15-2012, 15:44

Dont Worry.

Open zZBB Factory soft, go to "BB reader" tab and do click in "Read Codes from phone" and put it here.

Best Regards
zZ-Team

Quote:

Originally Posted by iwanhwk

cant find prd coz the sticker is gone...i already flash sfi from you but always fail sir.....hardware id mismatch sir,

iwanhwk · 05-16-2012, 08:35

log shown nothing sir....but when i read full info shown like this

Device Info:
PIN: 30681155

Bootrom Version: 5.6.0.5
HW ID Override: None
Metrics Version: 6.7
Build Date: Feb 23 2009
Build Time: 15:44:13
Build User: psinnathamby
Security: Enabled
Supported Options: 0x00000001
Drivers: 0x00000004
Processor: 0x00000008
LDR Blocks: 0x0C00A3F8
Bootrom Size: 0x00020000
External MCT/HWV: Enabled
Boot Mode: N/A
Boot OS Count: N/A
HWV:
Board Revision 0001 - 0x07
CPU Version 0002 - 0x8D
SW Compatibility 0003 - 0x01
POP Revision 0004 - 0x06
Power Mgt Hardware 0007 - 0x30
POP Security 000B - 0x02

Mem Config Table (ver 1.16):
Flash Chip: blocks 0-2000, Chip 0, Sub 0
Bootrom: blocks 0-0
OS Dynamic: blocks 2-????
FS Dynamic: blocks ????-1957
Modem EFS: blocks 1958-1989, total = 32
OS NV: blocks 1990-2000, total 11
CRC: 0xA4D2A353

Flash:
Number of chips: 1
Flash ID: NAND blocks 0-2020
Device ID: 68
Vendor ID: 236
Version ID: 34
Total Size: 252.6 MB

Memory Map:
NAND Blocks: 2021 * 128 Kb
RAM Base: 0x10000000
IRAM Base: 0x0C000000
OS Range: 2 - 137

File System:
Memory Map:
138 - 1957
Sectors: 1820

Branding:
VendorID: 104

OS Version: 4.1.0.10
Metrics Version: 3.16
FS Code Version: 10.0.0.0
FAT Code Version: 2.23
Package Version: ""
Build Date: Apr 29 2009
Build Time: 18:38:01
Build User: absadmin
SV Number: 1
OS Address: 0x10000000-0x110E386B
App Start: * No Application Linked *

RAM usage: 0x159FFFFC-0x17FFFFFF
IRAM End: no IRAM!
DSP ROM2 Address: *not present*
OS Extended Addr: 0x00000000
LDR Blocks: 0x10000774

API Checksum: 0x00000000
JumpTable (<3): 0x00000000
JumpTable (>2): 0x00000000

Radio Code: Eltron5 radio code linked
OS API Version: 115.0
STP Protocol Ver: 5.147.1 (factory OS)

HWV:
Board Revision 0001 - 0x02 - 0xFF, 0x01
POP Revision 0004 - 0x00 - 0xFF, 0x01
CPU Version 0002 - 0x00 - 0x8B, 0x01
CPU Version 0002 - 0x8D - 0xFF, 0x01
SW Compatibility 0003 - 0x00 - 0x01, 0x01
Power Mgt Hardware 0007 - 0x03 - 0xFF, 0x01

Version Table:
OS API Version: 115.0
STP protocol version: 5.147.1
BlockFS API Version: 10.0.0.0
USB driver version: 01.07
Bugdisp RTAS key: 1.0
STP RTAS key: 1.0
NVSIG RTAS key: 1.0
Block map version: 2.12

Done.

**elcapitel** · 05-16-2012, 16:38

vendorID 104 = Sprint

Blackberry 9630 Sprint:
DEFAULT_PRL_SPRINT_AFT PRD-22706-005 9630 Sprint Worldphone Black Default PRL.

Try to install 9630AMEA_PBr5.0.0_rel1675_PL4.2.0.451_A5.0.0.1030_ Sprint_L.P.exe and flash with Desktop Manager and post ur result.

Best Regards
zZ-Team

Quote:

Originally Posted by iwanhwk

log shown nothing sir....but when i read full info shown like this

Device Info:
PIN: 30681155

Bootrom Version: 5.6.0.5
HW ID Override: None
Metrics Version: 6.7
Build Date: Feb 23 2009
Build Time: 15:44:13
Build User: psinnathamby
Security: Enabled
Supported Options: 0x00000001
Drivers: 0x00000004
Processor: 0x00000008
LDR Blocks: 0x0C00A3F8
Bootrom Size: 0x00020000
External MCT/HWV: Enabled
Boot Mode: N/A
Boot OS Count: N/A
HWV:
Board Revision 0001 - 0x07
CPU Version 0002 - 0x8D
SW Compatibility 0003 - 0x01
POP Revision 0004 - 0x06
Power Mgt Hardware 0007 - 0x30
POP Security 000B - 0x02

Mem Config Table (ver 1.16):
Flash Chip: blocks 0-2000, Chip 0, Sub 0
Bootrom: blocks 0-0
OS Dynamic: blocks 2-????
FS Dynamic: blocks ????-1957
Modem EFS: blocks 1958-1989, total = 32
OS NV: blocks 1990-2000, total 11
CRC: 0xA4D2A353

Flash:
Number of chips: 1
Flash ID: NAND blocks 0-2020
Device ID: 68
Vendor ID: 236
Version ID: 34
Total Size: 252.6 MB

Memory Map:
NAND Blocks: 2021 * 128 Kb
RAM Base: 0x10000000
IRAM Base: 0x0C000000
OS Range: 2 - 137

File System:
Memory Map:
138 - 1957
Sectors: 1820

Branding:
VendorID: 104

OS Version: 4.1.0.10
Metrics Version: 3.16
FS Code Version: 10.0.0.0
FAT Code Version: 2.23
Package Version: ""
Build Date: Apr 29 2009
Build Time: 18:38:01
Build User: absadmin
SV Number: 1
OS Address: 0x10000000-0x110E386B
App Start: * No Application Linked *

RAM usage: 0x159FFFFC-0x17FFFFFF
IRAM End: no IRAM!
DSP ROM2 Address: *not present*
OS Extended Addr: 0x00000000
LDR Blocks: 0x10000774

API Checksum: 0x00000000
JumpTable (<3): 0x00000000
JumpTable (>2): 0x00000000

Radio Code: Eltron5 radio code linked
OS API Version: 115.0
STP Protocol Ver: 5.147.1 (factory OS)

HWV:
Board Revision 0001 - 0x02 - 0xFF, 0x01
POP Revision 0004 - 0x00 - 0xFF, 0x01
CPU Version 0002 - 0x00 - 0x8B, 0x01
CPU Version 0002 - 0x8D - 0xFF, 0x01
SW Compatibility 0003 - 0x00 - 0x01, 0x01
Power Mgt Hardware 0007 - 0x03 - 0xFF, 0x01

Version Table:
OS API Version: 115.0
STP protocol version: 5.147.1
BlockFS API Version: 10.0.0.0
USB driver version: 01.07
Bugdisp RTAS key: 1.0
STP RTAS key: 1.0
NVSIG RTAS key: 1.0
Block map version: 2.12

Done.

iwanhwk · 05-16-2012, 19:21

i already flash with all os 9630 sir,the problem is still the same....cant load os because hardware id always mismatch,rom content is different with regular 9630.

**elcapitel** · 05-18-2012, 18:35

vendorID 104 = Sprint

Blackberry 9630 Sprint:
-----------------------------
PRD-22706-005 9630 Sprint Worldphone Black Default PRL.

PRD-28633-006 SFI-23613-044 APP-30472-005 9630 Sprint PCS Black v5.0

PRD-28633-007 SFI-23613-044 APP-30472-005 9630 Sprint PCS Black v5.0

PRD-28633-024 SFI-23613-044 APP-30498-003 9630 Sprint MVNO Black v5.0

PRD-28707-006 SFI-23613-044 APP-30472-005 9630 Black v5.0 Sprint PCS

PRD-28707-024 SFI-23613-044 APP-30498-003 9630 Sprint MVNO Black v5.0

PRD-28708-003 SFI-23613-044 APP-30472-005 9630 Sprint PCS Black v5.0

PRD-28708-004 SFI-23613-044 APP-30472-005 9630 Sprint PCS Black v5.0

PRD-28709-003 SFI-23613-044 APP-30472-005 9630 Sprint PCS Black v5.0
-----------------------------

SFI-23613-044.
APP-30472-005
APP-30472-005

Post ur result! please!

Best Regards
zZ-Team

iwanhwk · 05-21-2012, 12:01

the problem still exist bro.......nganti ngelu aku.....wkwkwkwk

**elcapitel** · 05-21-2012, 13:52

Click in Wipe, after flash MFI file MFI-24429-025, after flash APP and SFI...
If yet, your problem is not solved, tell us for create special rapidloader for you.

Best Regards
zZ-Team

Quote:

Originally Posted by iwanhwk

the problem still exist bro.......nganti ngelu aku.....wkwkwkwk

iwanhwk · 05-21-2012, 17:08

@elcapitel

bro,this is not regular 9630,this is 9630m/fts(for trade show)the different is hw id,same like 8330 with 8330m,you can see the different,there is different sfi with hardware id,bb cant load sfi because hw id is mismatch,i see on DB sw config....there is no sfi for 9630m/fts.

best regards,

**elcapitel** · 05-21-2012, 17:35

Brother put here all files that you need, and i help you with pleasure.

Please be specific in what you need.
For example: I need SFI-XXXXX-XXX, APP-XXXXX-XXX
Thanks

Best Regards
zZ-Team

Quote:

Originally Posted by iwanhwk

@elcapitel

bro,this is not regular 9630,this is 9630m/fts(for trade show)the different is hw id,same like 8330 with 8330m,you can see the different,there is different sfi with hardware id,bb cant load sfi because hw id is mismatch,i see on DB sw config....there is no sfi for 9630m/fts.

best regards,

05-15-2012, 08:42	#1 (permalink)
iwanhwk Insane Poster Join Date: Nov 2008 Posts: 88 Member: 890481 Status: Offline Thanks: 132 Thanked 4 Times in 4 Posts	need mfi-24487-005 hello supporter.....can u give mfi-24487-005? i need that file..thank u regards,

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
thread	Thread Starter	Forum	Replies	Last Post
Need software upgrade for Nokia 5110	ptkrf	Nokia Legacy Phones ( DCT-1 , DCT-2 , DCT-3 , DCT-L )	26	09-25-2012 02:41
Eeprom dump lost, help needed.	CAMILO	Nokia Legacy Phones ( DCT-1 , DCT-2 , DCT-3 , DCT-L )	6	11-29-2010 18:04
needed pinout for carkit(N61xx)	mobileinfo	Nokia Hardware & Hardware-Repair Area	1	12-27-2006 10:20
need ericsson 88 cable	migdamas	Old Ericsson Phones & Sony Phones	1	06-02-1999 16:23
need eeprom photo????	mobileinfo	Nokia Legacy Phones ( DCT-1 , DCT-2 , DCT-3 , DCT-L )	0	05-26-1999 11:35

05-15-2012, 13:57	#4 (permalink)
iwanhwk Insane Poster Join Date: Nov 2008 Posts: 88 Member: 890481 Status: Offline Thanks: 132 Thanked 4 Times in 4 Posts	thank you all.......but i can find correct sfi for that mfi,phone already in conditions factory os,

05-15-2012, 14:32	#6 (permalink)
iwanhwk Insane Poster Join Date: Nov 2008 Posts: 88 Member: 890481 Status: Offline Thanks: 132 Thanked 4 Times in 4 Posts	cant find prd coz the sticker is gone...i already flash sfi from you but always fail sir.....hardware id mismatch sir,

05-16-2012, 08:35	#8 (permalink)
iwanhwk Insane Poster Join Date: Nov 2008 Posts: 88 Member: 890481 Status: Offline Thanks: 132 Thanked 4 Times in 4 Posts	log shown nothing sir....but when i read full info shown like this Device Info: PIN: 30681155 Bootrom Version: 5.6.0.5 HW ID Override: None Metrics Version: 6.7 Build Date: Feb 23 2009 Build Time: 15:44:13 Build User: psinnathamby Security: Enabled Supported Options: 0x00000001 Drivers: 0x00000004 Processor: 0x00000008 LDR Blocks: 0x0C00A3F8 Bootrom Size: 0x00020000 External MCT/HWV: Enabled Boot Mode: N/A Boot OS Count: N/A HWV: Board Revision 0001 - 0x07 CPU Version 0002 - 0x8D SW Compatibility 0003 - 0x01 POP Revision 0004 - 0x06 Power Mgt Hardware 0007 - 0x30 POP Security 000B - 0x02 Mem Config Table (ver 1.16): Flash Chip: blocks 0-2000, Chip 0, Sub 0 Bootrom: blocks 0-0 OS Dynamic: blocks 2-???? FS Dynamic: blocks ????-1957 Modem EFS: blocks 1958-1989, total = 32 OS NV: blocks 1990-2000, total 11 CRC: 0xA4D2A353 Flash: Number of chips: 1 Flash ID: NAND blocks 0-2020 Device ID: 68 Vendor ID: 236 Version ID: 34 Total Size: 252.6 MB Memory Map: NAND Blocks: 2021 * 128 Kb RAM Base: 0x10000000 IRAM Base: 0x0C000000 OS Range: 2 - 137 File System: Memory Map: 138 - 1957 Sectors: 1820 Branding: VendorID: 104 OS Version: 4.1.0.10 Metrics Version: 3.16 FS Code Version: 10.0.0.0 FAT Code Version: 2.23 Package Version: "" Build Date: Apr 29 2009 Build Time: 18:38:01 Build User: absadmin SV Number: 1 OS Address: 0x10000000-0x110E386B App Start: * No Application Linked * RAM usage: 0x159FFFFC-0x17FFFFFF IRAM End: no IRAM! DSP ROM2 Address: not present OS Extended Addr: 0x00000000 LDR Blocks: 0x10000774 API Checksum: 0x00000000 JumpTable (<3): 0x00000000 JumpTable (>2): 0x00000000 Radio Code: Eltron5 radio code linked OS API Version: 115.0 STP Protocol Ver: 5.147.1 (factory OS) HWV: Board Revision 0001 - 0x02 - 0xFF, 0x01 POP Revision 0004 - 0x00 - 0xFF, 0x01 CPU Version 0002 - 0x00 - 0x8B, 0x01 CPU Version 0002 - 0x8D - 0xFF, 0x01 SW Compatibility 0003 - 0x00 - 0x01, 0x01 Power Mgt Hardware 0007 - 0x03 - 0xFF, 0x01 Version Table: OS API Version: 115.0 STP protocol version: 5.147.1 BlockFS API Version: 10.0.0.0 USB driver version: 01.07 Bugdisp RTAS key: 1.0 STP RTAS key: 1.0 NVSIG RTAS key: 1.0 Block map version: 2.12 Done.

05-16-2012, 19:21	#10 (permalink)
iwanhwk Insane Poster Join Date: Nov 2008 Posts: 88 Member: 890481 Status: Offline Thanks: 132 Thanked 4 Times in 4 Posts	i already flash with all os 9630 sir,the problem is still the same....cant load os because hardware id always mismatch,rom content is different with regular 9630.

05-18-2012, 18:35	#11 (permalink)
elcapitel Product Manager Join Date: Jul 2005 Location: zunZun Team Age: 32 Posts: 3,366 Member: 166270 Status: Offline Sonork: 100.1579747 Thanks: 850 Thanked 4,999 Times in 1,071 Posts	vendorID 104 = Sprint Blackberry 9630 Sprint: ----------------------------- PRD-22706-005 9630 Sprint Worldphone Black Default PRL. PRD-28633-006 SFI-23613-044 APP-30472-005 9630 Sprint PCS Black v5.0 PRD-28633-007 SFI-23613-044 APP-30472-005 9630 Sprint PCS Black v5.0 PRD-28633-024 SFI-23613-044 APP-30498-003 9630 Sprint MVNO Black v5.0 PRD-28707-006 SFI-23613-044 APP-30472-005 9630 Black v5.0 Sprint PCS PRD-28707-024 SFI-23613-044 APP-30498-003 9630 Sprint MVNO Black v5.0 PRD-28708-003 SFI-23613-044 APP-30472-005 9630 Sprint PCS Black v5.0 PRD-28708-004 SFI-23613-044 APP-30472-005 9630 Sprint PCS Black v5.0 PRD-28709-003 SFI-23613-044 APP-30472-005 9630 Sprint PCS Black v5.0 ----------------------------- SFI-23613-044. APP-30472-005 APP-30472-005 Post ur result! please! Best Regards zZ-Team

05-21-2012, 12:01	#12 (permalink)
iwanhwk Insane Poster Join Date: Nov 2008 Posts: 88 Member: 890481 Status: Offline Thanks: 132 Thanked 4 Times in 4 Posts	the problem still exist bro.......nganti ngelu aku.....wkwkwkwk

05-21-2012, 17:08	#14 (permalink)
iwanhwk Insane Poster Join Date: Nov 2008 Posts: 88 Member: 890481 Status: Offline Thanks: 132 Thanked 4 Times in 4 Posts	@elcapitel bro,this is not regular 9630,this is 9630m/fts(for trade show)the different is hw id,same like 8330 with 8330m,you can see the different,there is different sfi with hardware id,bb cant load sfi because hw id is mismatch,i see on DB sw config....there is no sfi for 9630m/fts. best regards,