alcatel 9001x unlock supported

[GSM_Support]

@ charikaar,

Here are some main tips on how to find required manual / check what packs are required:

1. Go to the list of supported phone models
2. Find required brand - phone model
3. Click left mouse button on it
4. List of supported operation and information on required packs will appear
5. Under the list of supported operations appears you can see "Help" button
6. By pressing "Help" you will be redirected to the page with the manuals

Best Regards
GSMServer team

[darmobiles]

i use ###2324#,DIAG Protector ON and OFF alos chek
debugging is on
but HS-USB Diagnostics not showing
i try powered off phone also powered on but still not making HS-USB Diagnostics port.
whats problem? please guide
Thanks

[i_seeque]

Originally Posted by GSM_Support

@ niceraees,

Current phone model requires to be connected in a charging mode.
For the detailed manual on how to service phone in a charging mode, refer to this link, please.

Best Regards
GSMServer team

Alcatel 9001x

this is a completely misleading information.
- Connect phone
- phone must be Connected in ON mode (###2324# code to enable diag port & wait few seconds)
- Select Model
- Press Direct Unlock Or Get Unlock code
- After connection, Phone will reboot and...
BINGO

[ashraf_bcs]

SigmaKey 2.26.03 Qcom: Get unlock codes
ALCATEL HS-USB Diagnostics 901B (COM246), Provider: TCL, Driver ver.: 6.0.0.0, Date: 08-Aug-14, USB\VID_1BBB&PID_901B&REV_0310&MI_01
Phone model: OT-9001 / 9001D
Firmware: MPSS.JO.1.1.c1-00033-8909_GEN_PACK-1.51122.1
Date: Jun 18 2016 15:36:14, Apr 07 2016 01:00:00, 8909.gen
Baseband Processor: 8909
Detecting flash...eMMC, Flash size: 14.56 Gb
Hardware IMEI: 358346070485391
Unable to read codes for this phone model. Do you want to perform direct unlock instead? [YES]
Reading security block...XMD0CD00BR00
Security area saved to "C:\Users\ASHRAF ALI\Documents\SigmaKey\security backup\0411080644\35834607048****_8909_eMMC_XMD0CD 00BR00.skb"
Unlocking phone....Done

[Elson Lleshi]

How can i connect to usb hs usb diagnostic afor this model?

[GSM_Support]

@ Elson Lleshi,

Procedure:

• Open Qcom tab
• Select your model in the right “Phone model” drop-down list
• Install required drivers
• Power off the phone
• Connect your phone to PC with USB cable
• Wait up to 30 seconds while the diagnostic port appears (your phone will be in charging mode)

Diagnostic mode activation: dial *#2618# or ###2324#

Best Regards
GSMServer team

[rajamtkmaster]

Hi sir,
I have done but with usb deb ON and ON phone. Port detected and direct unlock.

SigmaKey v.2.26.09
888536468 Sigma dongle 2.26, Initializing...OK
Pack 1: Activated
Pack 2: Activated
Pack 3: Activated
--------- 2017-10-10 15:48:35 ---------
SigmaKey 2.26.09 Qcom: Direct unlock
ALCATEL HS-USB Diagnostics 903A (COM84), Provider: TCL, Driver ver.: 2.1.1.2, Date: 2/2/2015, USB\VID_1BBB&PID_903A&REV_0310&MI_01
Phone model: OT-9001 / 9001D
Firmware: MPSS.JO.1.1.c1-00033-8909_GEN_PACK-1.51122.1.92357.2
Date: May 4 2017 19:41:27, Apr 05 2017 04:00:00, 8909.gen
Baseband Processor: 8909
Detecting flash...eMMC, Flash size: 14.56 Gb
Hardware IMEI: 358346070564492
Reading security block...X8C0LS01BR20
Security area saved to "C:\Users\Ali\Documents\SigmaKey\security backup\0888536468\358346070564492_8909_eMMC_X8C0LS 01BR20.skb"
Unlocking phone....Done

Thanks
Br, Raja

[danisajee]

--------- 2018-01-02 18:37:39 ---------
SigmaKey 2.27.00 Qcom: Direct unlock
ALCATEL HS-USB Diagnostics 903A (COM797), Provider: TCL, Driver ver.: 6.0.0.0, Date: 8/8/2014, USB\VID_1BBB&PID_903A&REV_0310&MI_01
Phone model: OT-9001 / 9001X
Firmware: MPSS.JO.1.1.c1-00033-8909_GEN_PACK-1.51122.1.92357.2
Date: May  4 2017 19:41:27, Apr 05 2017 04:00:00, 8909.gen
Baseband Processor: 8909
Detecting flash...eMMC, Flash size: 14.56 Gb
Hardware IMEI: 358346070243881
Reading security block...XMD0CD00BR00
Security area saved to "C:\Users\G.S.M Solution\Documents\SigmaKey\security backup\0447714362\358346070243881_8909_eMMC_XMD0CD00BR00.skb"
Unlocking phone....Don

[TMAC1122]

SigmaKey 2.27.13b3 Qcom: Remove FRP / Huawei ID
ALCATEL HS-USB Diagnostics 901B (COM18), Provider: TCL, Driver ver.: 6.0.0.0, Date: 08/08/2014, USB\VID_1BBB&PID_901B&REV_0310&MI_01
Phone model: OT-9001 / 9001X
Firmware: MPSS.JO.1.1.c1-00033-8909_GEN_PACK-1.51122.1
Date: Jun 18 2016 15:36:14, Apr 07 2016 01:00:00, 8909.gen
Baseband Processor: 8909
Detecting flash...eMMC, Flash size: 14.56 Gb
Hardware IMEI: 358346070763227
Security area saved to "C:\Users\FTC\Documents\SigmaKey\security backup\0524810886\358346070763227_8909_eMMC.skb"
Removing FRP lock.....Done