ALCATEL XL 5056N unlock done - Page 3 - GSM-Forum

antoniogonzalez · 01-04-2017, 09:38

Quote:

Originally Posted by ghacks

SigmaKey v.2.19.03 build 02
426871453 Sigma dongle 2.19, Initializing...OK
Pack 1: Activated
Pack 2: Activated
--------- 2016-10-06 16:44:41 ---------
SigmaKey 2.19.03b2 Qcom: Direct unlock
Android HS-USB Diagnostics AF0E (COM14), Provider: TCL, Driver ver.: 2.1.1.2, Date: 2/1/2015, USB\VID_1BBB&PID_AF0E&REV_0225&MI_00
Phone model: OT-5056
Firmware: MPSS.JO.1.0.c5.2-00018-M8909EAAAANVZM-1
Date: Oct 4 2015 16:51:45, Sep 30 2015 08:00:00, 8909.gen
Baseband Processor: 8909
Detecting flash...eMMC, Flash size: 14.68 Gb
Software IMEI: 01xxxxxxxxxxxxxx
Reading security block...X8D0UP00BR10
Removing firmware protection...OK
Security area saved to "C:\Users\Administrator\Documents\SigmaKey\securit y backup\01445xxxxxx_8909_eMMC_X8D0UP00BR10.skb"
Unlocking phone....Done thanks sigmakey

You Log Not is 5056N Metropcs

Log Metropcs

SigmaKey 2.22.00 Qcom: Direct unlock
ALCATEL HS-USB Diagnostics 903A (COM53), Provider: TCL, Driver ver.: 6.0.0.0, Date: 07/08/2014, USB\VID_1BBB&PID_903A&REV_0310&MI_01
Phone model: OT-5056
Firmware: MPSS.JO.1.1.c1.4-00012-8909_GEN_PACK-1
Date: Jul 15 2016 13:06:25, Jul 12 2016 00:00:00, 8909.gen

Loader 5056 not work in 5056N metropcs

emicabher · 02-18-2017, 05:21

So, no one has a solution for this 5056n?

topspin220 · 03-31-2017, 20:20

Same boat here, any fresh ideas?

sending boot error

ghacks · 04-02-2017, 18:33

Quote:

Originally Posted by antoniogonzalez

You Log Not is 5056N Metropcs

Log Metropcs

SigmaKey 2.22.00 Qcom: Direct unlock
ALCATEL HS-USB Diagnostics 903A (COM53), Provider: TCL, Driver ver.: 6.0.0.0, Date: 07/08/2014, USB\VID_1BBB&PID_903A&REV_0310&MI_01
Phone model: OT-5056
Firmware: MPSS.JO.1.1.c1.4-00012-8909_GEN_PACK-1
Date: Jul 15 2016 13:06:25, Jul 12 2016 00:00:00, 8909.gen

Loader 5056 not work in 5056N metropcs

bro look at log for see its the same security firmware do u have its the same of me.. before u talk like that.. and plus this phone its device i unlock it until 2016..

gorydev · 04-12-2017, 15:51

last software version and still sending boot error please solve this!!!

SigmaKey v.2.24.03
722021947 Sigma dongle 2.24, Initializing...OK
Pack 1: Activated
Pack 2: Activated
Pack 3: Not activated
--------- 2017-04-12 10:47:05 ---------
SigmaKey 2.24.03 Qcom: Liberación directa
ALCATEL HS-USB Diagnostics A014 (COM366), Proveedor:: TCL, Versión de drivers:: 2.1.1.2, Fecha: 01/02/2015, USB\VID_1BBB&PID_A014&REV_0310
Modelo del teléfono: OT-5056
Envío del cargador...Fallido

asadnow2k · 05-04-2017, 02:36

so 5056n is not supported yet rigth?

mcandre · 05-04-2017, 08:29

Quote:

Originally Posted by asadnow2k

so 5056n is not supported yet rigth?

Yes, you are right regarding this.

kumenger · 06-09-2017, 20:17

--------- 2017-06-09 12:08:41 ---------
SigmaKey 2.25.05 Qcom: Direct unlock
Android HS-USB Diagnostics AF02 (COM149), Provider: TCL, Driver ver.: 6.0.0.0, Date: 8/7/2014, USB\VID_1BBB&PID_AF02&REV_0225&MI_00
Phone model: OT-5056
Baseband Processor: 8909
Detecting flash...eMMC, Flash size: 14.68 Gb
Hardware IMEI: 0144510095xxxxx
Reading security block...X8D0UP00BR10
Security area saved to "C:\Users\user\Documents\SigmaKey\security backup\014451009593012_8909_eMMC_X8D0UP00BR10.skb"
Removing firmware protection...OK
Unlocking phone....Done

nonsonett · 06-24-2017, 19:56

Quote:

Originally Posted by mcandre

This is Alcatel Fierce 4

SigmaKey 2.25.06 Qcom: Direct unlock
ALCATEL HS-USB Diagnostics 903A (COM543), Provider: TCL, Driver ver.: 6.0.0.0, Date: 8/7/2014, USB\VID_1BBB&PID_903A&REV_0310&MI_01
Phone model: OT-5056
Firmware: MPSS.JO.1.1.c1.4-00017-8909_GEN_PACK-1
Date: Dec 12 2016 20:20:42, Nov 15 2016 00:00:00, 8909.gen
Connecting....
it stop here

GSM_Support · 06-26-2017, 07:56

@ nonsonett,

Re-connect phone, re-install drivers and repeat operation once again.

Best Regards
GSMServer team

mcandre · 06-26-2017, 07:58

Follow this guide: Service without rooting

nonsonett · 06-26-2017, 12:57

Diagnostic mode activation: dial ###2324# when phone is no i dail this code ###2324# i get this message DiagProtector setting - i get this Diag Protector ON THEN I START UNLOCK IT STOP here when trying to enable diagnostic port REMENBER THE PHONE IS ON
704649539 Sigma dongle 2.25, Initializing...OK
Pack 1: Activated
Pack 2: Activated
Pack 3: Activated
--------- 2017-06-26 04:34:34 ---------
SigmaKey 2.25.06 Qcom: Direct unlock
ALCATEL HS-USB Diagnostics 901B (COM4), Provider: TCL, Driver ver.: 6.0.0.0, Date: 8/7/2014, USB\VID_1BBB&PID_901B&REV_0310&MI_01
Phone model: OT-5056
Firmware: MPSS.JO.1.1.c1.4-00017-8909_GEN_PACK-1
Date: Dec 12 2016 20:20:42, Nov 15 2016 00:00:00, 8909.gen
Connecting....Phone not found

GSM_Support · 06-26-2017, 14:41

@ nonsonett,

Current phone model requires to be connected in Powered Off State.
Please double check Service without rooting manual and run operation as it is stated in there.

Best Regards
GSMServer team

Ramysander · 07-07-2017, 22:01

Quote:

Originally Posted by GSM_Support

@ sainesh

Procedure:

Open Qcom tab
Select your model in the right “Phone model” drop-down list
Install required drivers
Power off the phone
Connect your phone to PC with USB cable
Wait up to 30 seconds while the diagnostic port appears (your phone will be in charging mode)

Diagnostic mode activation: dial *#2618# or ###2324#

Best Regards
GSMServer team

When I try to do it with Sigma the Phone Bounces and it passes to qualcomm hsusb qdloader 9008, soon it is firmed the software of Sigma

GSM_Support · 07-08-2017, 09:47

@ Ramysander,

What phone model exactly you are trying to service?
What an issue exactly appears?
Show us some screenshots / log files, it would spread some light at your case.

Best Regards
GSMServer team

03-31-2017, 20:20	#33 (permalink)
topspin220 Junior Member Join Date: Jan 2016 Posts: 21 Member: 2511800 Status: Offline Thanks Meter: 7	sending boot problem Same boat here, any fresh ideas? sending boot error

06-09-2017, 20:17	#38 (permalink)
kumenger Freak Poster Join Date: Jun 2012 Location: Ethiopia \|\| united State Posts: 340 Member: 1770631 Status: Offline Sonork: id Thanks Meter: 89	well in secondes it unlocked metro device unlock app choosing ot-5056 --------- 2017-06-09 12:08:41 --------- SigmaKey 2.25.05 Qcom: Direct unlock Android HS-USB Diagnostics AF02 (COM149), Provider: TCL, Driver ver.: 6.0.0.0, Date: 8/7/2014, USB\VID_1BBB&PID_AF02&REV_0225&MI_00 Phone model: OT-5056 Baseband Processor: 8909 Detecting flash...eMMC, Flash size: 14.68 Gb Hardware IMEI: 0144510095xxxxx Reading security block...X8D0UP00BR10 Security area saved to "C:\Users\user\Documents\SigmaKey\security backup\014451009593012_8909_eMMC_X8D0UP00BR10.skb" Removing firmware protection...OK Unlocking phone....Done

02-18-2017, 05:21	#32 (permalink)
emicabher No Life Poster Join Date: Oct 2006 Location: Mexicali Posts: 691 Member: 372188 Status: Offline Thanks Meter: 57	So, no one has a solution for this 5056n?

04-12-2017, 15:51	#35 (permalink)
gorydev Insane Poster Join Date: May 2013 Posts: 84 Member: 1929852 Status: Offline Thanks Meter: 3	last software version and still sending boot error please solve this!!! SigmaKey v.2.24.03 722021947 Sigma dongle 2.24, Initializing...OK Pack 1: Activated Pack 2: Activated Pack 3: Not activated --------- 2017-04-12 10:47:05 --------- SigmaKey 2.24.03 Qcom: Liberación directa ALCATEL HS-USB Diagnostics A014 (COM366), Proveedor:: TCL, Versión de drivers:: 2.1.1.2, Fecha: 01/02/2015, USB\VID_1BBB&PID_A014&REV_0310 Modelo del teléfono: OT-5056 Envío del cargador...Fallido

05-04-2017, 02:36	#36 (permalink)
asadnow2k No Life Poster Join Date: Nov 2005 Location: Sindhu Desh Age: 36 Posts: 8,135 Member: 199814 Status: Offline Thanks Meter: 1,960	so 5056n is not supported yet rigth?

06-26-2017, 07:56	#40 (permalink)
GSM_Support Product Supporter Join Date: Feb 2005 Location: GSMserver Team Posts: 36,980 Member: 121052 Status: Offline Sonork: 100.107126 Thanks Meter: 80,766	@ nonsonett, Re-connect phone, re-install drivers and repeat operation once again. Best Regards GSMServer team

06-26-2017, 07:58	#41 (permalink)
mcandre No Life Poster Join Date: Mar 2006 Location: Central Europe Age: 39 Posts: 11,877 Member: 239548 Status: Offline Thanks Meter: 2,781	Follow this guide: Service without rooting

06-26-2017, 12:57	#42 (permalink)
nonsonett Freak Poster Join Date: Sep 2012 Posts: 235 Member: 1812725 Status: Offline Thanks Meter: 17	Diagnostic mode activation: dial ###2324# when phone is no i dail this code ###2324# i get this message DiagProtector setting - i get this Diag Protector ON THEN I START UNLOCK IT STOP here when trying to enable diagnostic port REMENBER THE PHONE IS ON 704649539 Sigma dongle 2.25, Initializing...OK Pack 1: Activated Pack 2: Activated Pack 3: Activated --------- 2017-06-26 04:34:34 --------- SigmaKey 2.25.06 Qcom: Direct unlock ALCATEL HS-USB Diagnostics 901B (COM4), Provider: TCL, Driver ver.: 6.0.0.0, Date: 8/7/2014, USB\VID_1BBB&PID_901B&REV_0310&MI_01 Phone model: OT-5056 Firmware: MPSS.JO.1.1.c1.4-00017-8909_GEN_PACK-1 Date: Dec 12 2016 20:20:42, Nov 15 2016 00:00:00, 8909.gen Connecting....Phone not found

06-26-2017, 14:41	#43 (permalink)
GSM_Support Product Supporter Join Date: Feb 2005 Location: GSMserver Team Posts: 36,980 Member: 121052 Status: Offline Sonork: 100.107126 Thanks Meter: 80,766	@ nonsonett, Current phone model requires to be connected in Powered Off State. Please double check Service without rooting manual and run operation as it is stated in there. Best Regards GSMServer team

07-08-2017, 09:47	#45 (permalink)
GSM_Support Product Supporter Join Date: Feb 2005 Location: GSMserver Team Posts: 36,980 Member: 121052 Status: Offline Sonork: 100.107126 Thanks Meter: 80,766	@ Ramysander, What phone model exactly you are trying to service? What an issue exactly appears? Show us some screenshots / log files, it would spread some light at your case. Best Regards GSMServer team