GSM-Forum

GSM-Forum (http://forum.gsmhosting.com/vbb/)
-   SigmaKey (http://forum.gsmhosting.com/vbb/f719/)
-   -   Huawei MediaPad T3 BG2-W09 FRP (http://forum.gsmhosting.com/vbb/f719/huawei-mediapad-t3-bg2-w09-frp-2367632/)

komserwis 03-23-2018 11:10

Huawei MediaPad T3 BG2-W09 FRP
 
--------- 2018-03-23 10:00:18 ---------
SigmaKey 2.27.13 Qcom: Remove FRP / Huawei ID
MediaTek USB VCOM (Android) (COM47), Provider: MediaTek Inc., Driver ver.: 3.0.1504.0, Date: 2016-01-22, USB\VID_0E8D&PID_2006&REV_????&MI_02
Error writing to serial port

uajanath 03-23-2018 11:15

connect phone in fastboot mode

GSM_Support 03-23-2018 11:19

@ komserwis,

Connect phone in a FastBoot mode and perform Remove FRP operation on MTK->Service tab.

Best Regards
GSMServer team



http://www.smart-clip.com/img/sigma_userbar.png

komserwis 03-23-2018 11:29

Quote:

Originally Posted by uajanath (Post 13037666)
connect phone in fastboot mode

Volume Down + cable Dont Work

komserwis 03-23-2018 15:18

Quote:

Originally Posted by GSM_Support (Post 13037672)
@ komserwis,

Connect phone in a FastBoot mode and perform Remove FRP operation on MTK->Service tab.

Best Regards
GSMServer team



http://www.smart-clip.com/img/sigma_userbar.png

How to connect in FastBoot Mode?

GSM_Support 03-23-2018 15:23

@ komserwis,

Master Reset tab and try connecting phone in a FastBoot Mode once again.
It suppose to enter in a Fastboot Mode in such way: Power Device off, press and gold Vol- Key, connect USB cable.

Best Regards
GSMServer team



http://www.smart-clip.com/img/sigma_userbar.png

mcandre 03-23-2018 15:37

Close Sigma, or close MTK tab.
Set the phone to fastboot mode, then open Sigma and do the job.

komserwis 03-23-2018 15:47

Quote:

Originally Posted by GSM_Support (Post 13038065)
@ komserwis,

Master Reset tab and try connecting phone in a FastBoot Mode once again.
It suppose to enter in a Fastboot Mode in such way: Power Device off, press and gold Vol- Key, connect USB cable.

Best Regards
GSMServer team



http://www.smart-clip.com/img/sigma_userbar.png

Im reset few times and try connect in this way but Im see only logo and medipad is charging...

redbaronn 04-19-2018 17:23

It worked well :)

Smart-Clip 2 1.27.16 MTK: Remove FRP
Phone model: BG2-W09
Version: BG2-W09C100B007
Removing FRP lock...Done

atonibay 09-20-2018 01:56

Quote:

Originally Posted by komserwis (Post 13037689)
Volume Down + cable Dont Work


use this:

Volume Down + Power Button + Insert Cable

Tested just now..

SigmaKey v.2.29.03
807474322 Sigma dongle 2.29, Initializing...OK
Pack 1: Activated
Pack 2: Activated
Pack 3: Activated
--------- 2018-09-20 11:52:35 ---------
SigmaKey 2.29.03 MTK: Remove FRP
Phone model: BG2-W09
Version: BG2-W09C128B027
Removing FRP lock...Done

danisajee 11-16-2018 12:30

Code:

2018-11-16 16:59:53 ---------
SigmaKey 2.29.06 MTK: Remove FRP
Phone model: BG2-W09
Version: BG2-W09C199B006
Removing FRP lock...Done


nbkappa 02-02-2019 08:49

1. turn off tablet

2. VOL- and insert usb and wait for the chinese recovery

3. adb reboot-bootloader and wait for fastboot

4. MTK > Service > Remove FRP and wait for auto reset

all done !

Haider222 02-02-2019 08:50

Best info
 
I think this is the best information ever i seen before...

Dynam0 04-24-2019 01:31

Quote:

Originally Posted by atonibay (Post 13326430)
use this:

Volume Down + Power Button + Insert Cable

Tested just now..

SigmaKey v.2.29.03
807474322 Sigma dongle 2.29, Initializing...OK
Pack 1: Activated
Pack 2: Activated
Pack 3: Activated
--------- 2018-09-20 11:52:35 ---------
SigmaKey 2.29.03 MTK: Remove FRP
Phone model: BG2-W09
Version: BG2-W09C128B027
Removing FRP lock...Done




Tested! worked like a champ

ru.mobile 05-21-2019 19:23

Huawei MediaPad T3 BG2-W09 FRP REMOVE DONE
 
Quote:

Originally Posted by nbkappa (Post 13531980)
1. turn off tablet

2. VOL- and insert usb and wait for the chinese recovery

3. adb reboot-bootloader and wait for fastboot

4. MTK > Service > Remove FRP and wait for auto reset

all done !


--------- 2019-05-21 19:06:22 ---------
SigmaKey 2.32.00 MTK: Remove FRP
Phone model: BG2-W09
Version: BG2-W09C100B009
Removing FRP lock...Done


All times are GMT +1. The time now is 11:51.


vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2020 DragonByte Technologies Ltd.
- GSM Hosting Ltd. - 1999-2017 -

Page generated in 0.29570 seconds with 5 queries

SEO by vBSEO