Motorola XT1541 unlock - GSM-Forum

shh_903 · 09-02-2016, 17:27

Hi GSM Server team i cant unlock Motorola XT1541 with sigma box phone did not ask qualcomm driver only ask moto g3 drivers that cant be install
i also follow this instr

Select "Qualcomm" platform from the tab menu in the upper left side of the software
"Phone model" dropdown menu has to be set to "Autodetect"
Go to "Unlock" tab
Set the phone to the special mode:
Turn the phone OFF
Press Vol -, Power ON, then release Power ON button
Select BP Tools in the appeared menu, then confirm selection with Vol+ button
Connect the phone to PC using USB cable
Install required USB Driver (only if the phone is connected for the first time)
Select QC Diag port in the ports selection tab
Press "Unlock" button
The message "Done" indicates that the procedure has been completed successfully
Wait for the message "Restarting phone... Done" to appear in Sigma dialog window; only after that you can turn off the phone

And also see these link but no luck
http://forum.gsmhosting.com/vbb/f719...ck-ok-2083028/

Help me how can solve this issu

shh_903 · 09-02-2016, 23:51

Gsm server team i am waiting plz help me i cant find QC drivers

GSM_Support · 09-03-2016, 08:58

@ shh_903,

Install drivers manually for all devices that appears after you connect phone to PC and run Direct Unlock operation.

Best Regards
GSMServer team

shh_903 · 09-03-2016, 09:41

Quote:

Originally Posted by GSM_Support

@ shh_903,

Install drivers manually for all devices that appears after you connect phone to PC and run Direct Unlock operation.

Best Regards
GSMServer team

Sir phone did not taje this drivers i cant understand could you plz check
via team viewer

shh_903 · 09-03-2016, 11:13

Quote:

Originally Posted by GSM_Support

@ shh_903,

Install drivers manually for all devices that appears after you connect phone to PC and run Direct Unlock operation.

Best Regards
GSMServer team

Thanks sir for your help its done now just installed the drivers manully
Thanks agian

sdr · 01-09-2017, 16:48

Pack 1: Activated
Pack 2: Activated
Pack 3: Activated
5-------- Sigma dongle 2.22, Initializing...OK
--------- 2017-01-09 17:46:05 ---------
SigmaKey 2.22.00 Qcom: Direct unlock
Motorola QC Diag Port (COM15), Provider: Motorola, Driver ver.: 5.1.0.0, Date: 3/1/2013, USB\VID_22B8&PID_2EC1&REV_????&MI_00
Firmware: MPSS.DPM.2.0.2.c1.8-00041-M8936FAAAANUZM-1
Date: Oct 29 2015 06:09:40, Oct 26 2015 05:00:00, EAAAANVZ
Software IMEI: 3554890........
Bluetooth address: 000000000000
Unlocking phone.......
This baseband version is not supported. Try downgrading it.
Read the manual at the official site Sigma - MTK, Qualcomm, Broadcom, TI OMAP based flashing, unlocking, repair IMEI solution for details.

Any help please !?

GSM_Support · 01-10-2017, 08:45

@ sdr,

Downgrade phone's baseband according to this manual and repeat unlock operation once again.

Best Regards
GSMServer team

sdr · 01-13-2017, 17:20

Quote:

Originally Posted by GSM_Support

@ sdr,

Downgrade phone's baseband according to this manual and repeat unlock operation once again.

Best Regards
GSMServer team

SigmaKey v.2.22.00
524...... Sigma dongle 2.22, Initializing...OK
Pack 1: Activated
Pack 2: Activated
Pack 3: Activated
--------- 2017-01-13 18:12:51 ---------
SigmaKey 2.22.00 ADB: Direct unlock
* daemon not running. starting it now *
* daemon started successfully *
^ ROMaster Composite ADB Interface
Version: Linux version 3.10.49-gb3543f3 (hudsoncm@ilclbld33) (gcc version 4.8 (GCC) ) #1 SMP PREEMPT Tue Jun 30 19:18:31 CDT 2015
Phone model: motorola MotoG3
Android 5.1.1; Firmware: LPI23.72-33; Date: Tue Jun 30 19:06:03 CDT 2015
Version: LPI23.72-33
Baseband Firmware: M8916_2020610.17.03.21.26R OSPREY_EMEA_CUST
Baseband Processor: Qualcomm Technologies, Inc MSM8916
Version: LPI23.72-33
The phone is NOT connected properly. Read the manual at the official site for details.
--------- 2017-01-13 18:14:04 ---------
SigmaKey 2.22.00 Qcom: Direct unlock
Motorola QC Diag Port (COM33), Provider: Motorola, Driver ver.: 5.1.0.0, Date: 3/1/2013, USB\VID_22B8&PID_2EC5&REV_FFFF&MI_00
Firmware: MPSS.DPM.2.0.2.c1.8-00017-M8936FAAAANUZM-1
Date: Jun 18 2015 05:06:36, Jun 12 2015 10:00:00, EAAAANVZ
Software IMEI: 355489..........
Bluetooth address: 000000000000
Unlocking phone.........Done
Restarting phone....PLEASE RESTART PHONE MANUALLY!
Done

Thank you !

rebainoor · 11-21-2017, 12:21

--------- 2017-11-21 12:20:16 ---------
SigmaKey 2.26.14 Qcom: Direct unlock
Motorola QC Diag Port (COM132), Provider: Motorola, Driver ver.: 5.1.0.0, Date: 01/03/2013, USB\VID_22B8&PID_2EC1&REV_FFFF&MI_00
Firmware: MPSS.DPM.2.0.2.c1.8-00044-M8936FAAAANUZM-1
Date: Jan 12 2016 03:09:45, Nov 22 2015 23:00:00, EAAAANVZ
Software IMEI: 355489067641280
Bluetooth address: 000000000000
Unlocking phone.......Unsupported phone model

GSM_Support · 11-21-2017, 12:37

@ rebainoor,

Downgrade phone's baseband and repeat unlock operation once again.

Best Regards
GSMServer team

rebainoor · 11-21-2017, 14:16

Quote:

Originally Posted by GSM_Support

@ rebainoor,

Downgrade phone's baseband and repeat unlock operation once again.

Best Regards
GSMServer team

Its safe to downgrade basebande from 6.0.1 ?

GSM_Support · 11-21-2017, 17:05

@ rebainoor,

Current phone was already serviced many times with the downgrade baseband feature.
You can check successful report with the same situation and firmware version for example here.

Best Regards
GSMServer team

umarmsn · 02-08-2018, 15:27

SigmaKey v.2.27.05
953759621 Sigma dongle 2.27, Initializing...OK
Pack 1: Activated
Pack 2: Activated
Pack 3: Activated
--------- 2018-02-08 19:56:46 ---------
SigmaKey 2.27.05 Qcom: Direct unlock
Motorola QC Diag Port (COM29), Provider: Motorola, Driver ver.: 5.1.0.0, Date: 01/03/2013, USB\VID_22B8&PID_2EC5&REV_????&MI_00
Firmware: MPSS.DPM.2.0.2.c1.8-00041-M8936FAAAANUZM-1
Date: Oct 29 2015 06:09:40, Oct 26 2015 05:00:00, EAAAANVZ
Software IMEI: 355489061804730
Bluetooth address: 000000000000
Unlocking phone.......Unsupported phone model

GSM_Support · 02-08-2018, 16:03

@ umarmsn,

Downgrade phone's baseband and repeat unlock operation once again.

Best Regards
GSMServer team

umarmsn · 02-09-2018, 06:35

Quote:

Originally Posted by GSM_Support

@ umarmsn,

Downgrade phone's baseband and repeat unlock operation once again.

Best Regards
GSMServer team

need to unlock bootloader for this opration ?

09-02-2016, 17:27	#1 (permalink)
shh_903 No Life Poster Join Date: Nov 2006 Location: Lahore Posts: 1,669 Member: 392149 Status: Offline Thanks Meter: 199	Motorola XT1541 unlock Hi GSM Server team i cant unlock Motorola XT1541 with sigma box phone did not ask qualcomm driver only ask moto g3 drivers that cant be install i also follow this instr Select "Qualcomm" platform from the tab menu in the upper left side of the software "Phone model" dropdown menu has to be set to "Autodetect" Go to "Unlock" tab Set the phone to the special mode: Turn the phone OFF Press Vol -, Power ON, then release Power ON button Select BP Tools in the appeared menu, then confirm selection with Vol+ button Connect the phone to PC using USB cable Install required USB Driver (only if the phone is connected for the first time) Select QC Diag port in the ports selection tab Press "Unlock" button The message "Done" indicates that the procedure has been completed successfully Wait for the message "Restarting phone... Done" to appear in Sigma dialog window; only after that you can turn off the phone And also see these link but no luck http://forum.gsmhosting.com/vbb/f719...ck-ok-2083028/ Help me how can solve this issu

11-21-2017, 12:21	#9 (permalink)
rebainoor No Life Poster Join Date: Feb 2006 Location: In my LAB Posts: 3,163 Member: 231728 Status: Offline Thanks Meter: 2,103	Motorola XT1541 unlock not supported ! --------- 2017-11-21 12:20:16 --------- SigmaKey 2.26.14 Qcom: Direct unlock Motorola QC Diag Port (COM132), Provider: Motorola, Driver ver.: 5.1.0.0, Date: 01/03/2013, USB\VID_22B8&PID_2EC1&REV_FFFF&MI_00 Firmware: MPSS.DPM.2.0.2.c1.8-00044-M8936FAAAANUZM-1 Date: Jan 12 2016 03:09:45, Nov 22 2015 23:00:00, EAAAANVZ Software IMEI: 355489067641280 Bluetooth address: 000000000000 Unlocking phone.......Unsupported phone model

02-08-2018, 15:27	#13 (permalink)
umarmsn No Life Poster Join Date: Oct 2007 Location: chennai Age: 38 Posts: 5,480 Member: 616909 Status: Offline Sonork: 1672125 Thanks Meter: 648	Motorola xt1541 unlock Unsupported phone model SigmaKey v.2.27.05 953759621 Sigma dongle 2.27, Initializing...OK Pack 1: Activated Pack 2: Activated Pack 3: Activated --------- 2018-02-08 19:56:46 --------- SigmaKey 2.27.05 Qcom: Direct unlock Motorola QC Diag Port (COM29), Provider: Motorola, Driver ver.: 5.1.0.0, Date: 01/03/2013, USB\VID_22B8&PID_2EC5&REV_????&MI_00 Firmware: MPSS.DPM.2.0.2.c1.8-00041-M8936FAAAANUZM-1 Date: Oct 29 2015 06:09:40, Oct 26 2015 05:00:00, EAAAANVZ Software IMEI: 355489061804730 Bluetooth address: 000000000000 Unlocking phone.......Unsupported phone model

09-02-2016, 23:51	#2 (permalink)
shh_903 No Life Poster Join Date: Nov 2006 Location: Lahore Posts: 1,669 Member: 392149 Status: Offline Thanks Meter: 199	Gsm server team i am waiting plz help me i cant find QC drivers

09-03-2016, 08:58	#3 (permalink)
GSM_Support Product Supporter Join Date: Feb 2005 Location: GSMserver Team Posts: 36,980 Member: 121052 Status: Offline Sonork: 100.107126 Thanks Meter: 80,766	@ shh_903, Install drivers manually for all devices that appears after you connect phone to PC and run Direct Unlock operation. Best Regards GSMServer team

01-09-2017, 16:48	#6 (permalink)
sdr No Life Poster Join Date: Mar 2003 Location: Romania Brasov Age: 46 Posts: 659 Member: 25136 Status: Offline Sonork: 1591036 Thanks Meter: 54	Pack 1: Activated Pack 2: Activated Pack 3: Activated 5-------- Sigma dongle 2.22, Initializing...OK --------- 2017-01-09 17:46:05 --------- SigmaKey 2.22.00 Qcom: Direct unlock Motorola QC Diag Port (COM15), Provider: Motorola, Driver ver.: 5.1.0.0, Date: 3/1/2013, USB\VID_22B8&PID_2EC1&REV_????&MI_00 Firmware: MPSS.DPM.2.0.2.c1.8-00041-M8936FAAAANUZM-1 Date: Oct 29 2015 06:09:40, Oct 26 2015 05:00:00, EAAAANVZ Software IMEI: 3554890........ Bluetooth address: 000000000000 Unlocking phone....... This baseband version is not supported. Try downgrading it. Read the manual at the official site Sigma - MTK, Qualcomm, Broadcom, TI OMAP based flashing, unlocking, repair IMEI solution for details. Any help please !?

01-10-2017, 08:45	#7 (permalink)
GSM_Support Product Supporter Join Date: Feb 2005 Location: GSMserver Team Posts: 36,980 Member: 121052 Status: Offline Sonork: 100.107126 Thanks Meter: 80,766	@ sdr, Downgrade phone's baseband according to this manual and repeat unlock operation once again. Best Regards GSMServer team

11-21-2017, 12:37	#10 (permalink)
GSM_Support Product Supporter Join Date: Feb 2005 Location: GSMserver Team Posts: 36,980 Member: 121052 Status: Offline Sonork: 100.107126 Thanks Meter: 80,766	@ rebainoor, Downgrade phone's baseband and repeat unlock operation once again. Best Regards GSMServer team

11-21-2017, 17:05	#12 (permalink)
GSM_Support Product Supporter Join Date: Feb 2005 Location: GSMserver Team Posts: 36,980 Member: 121052 Status: Offline Sonork: 100.107126 Thanks Meter: 80,766	@ rebainoor, Current phone was already serviced many times with the downgrade baseband feature. You can check successful report with the same situation and firmware version for example here. Best Regards GSMServer team

02-08-2018, 16:03	#14 (permalink)
GSM_Support Product Supporter Join Date: Feb 2005 Location: GSMserver Team Posts: 36,980 Member: 121052 Status: Offline Sonork: 100.107126 Thanks Meter: 80,766	@ umarmsn, Downgrade phone's baseband and repeat unlock operation once again. Best Regards GSMServer team