Motorola xt1609 unlock done with Sigmakey

[NsNobel2]

Hi,
Trying to unlock Motorola XT1609 and facing following problem, pls help

SigmaKey 2.27.06 Qcom: Direct unlock
Motorola QC Diag Port (COM20), Provider: Motorola, Driver ver.: 5.1.0.0, Date: 3/1/2013, USB\VID_22B8&PID_2EC1&REV_????&MI_00
Firmware: MPSS.DPM.2.0.2.c1.8-00012-M8936FAAAANUZM-1
Date: Jun 3 2015 13:40:26, May 22 2015 05:00:00, EAAAANVZ
Software IMEI: 3541420737xxxxx
Bluetooth address: 000000000000
Unlocking phone........Failed

thanks
regards

[GSM_Support]

@ NsNobel2,

Make sure that:

• You use the latest version of Sigma software v.2.27.18
• Battery is fully charged
• All the side programs, that may interfere with the phone, are closed
• Phone’s cable and device itself should not be disconnected or disturbed until the procedure is fully completed
• Connect phone to USB port placed on the backside of PC (motherboard's USB port)
• Do not connect or disconnect other USB cables into the PC during the actual work with the phone
• Avoid using any kind of USB HUBs and long USB cables. Use the shortest-length USB cable available.
• Phone has stock (factory) firmware version
• SIM card is removed
• Repeat unlock operation

Best Regards
GSMServer team

[stopcell]

First flash the xt1601 Modem and make unlock with Sigmakey after that flash a xt1609 gsm rom
Unlock full GSM and CDMA

[NsNobel2]

Originally Posted by stopcell

First flash the xt1601 Modem and make unlock with Sigmakey after that flash a xt1609 gsm rom
Unlock full GSM and CDMA

Can you share the tested files or links?

[NsNobel2]

Originally Posted by GSM_Support

@ NsNobel2,

Make sure that:

• You use the latest version of Sigma software v.2.27.18
• Battery is fully charged
• All the side programs, that may interfere with the phone, are closed
• Phone’s cable and device itself should not be disconnected or disturbed until the procedure is fully completed
• Connect phone to USB port placed on the backside of PC (motherboard's USB port)
• Do not connect or disconnect other USB cables into the PC during the actual work with the phone
• Avoid using any kind of USB HUBs and long USB cables. Use the shortest-length USB cable available.
• Phone has stock (factory) firmware version
• SIM card is removed
• Repeat unlock operation

Best Regards
GSMServer team

Its same,

SigmaKey 2.27.19 Qcom: Direct unlock
Motorola QC Diag Port (COM16), Provider: Motorola, Driver ver.: 5.1.0.0, Date: 3/1/2013, USB\VID_22B8&PID_2EC1&REV_????&MI_00
Firmware: MPSS.DPM.2.0.2.c1.21-00008-M8936FAAAANUZM-1.62336.1
Date: Jul 8 2016 17:45:09, Jul 02 2016 03:00:00, EAAAANVZ
Software IMEI: 354142073753490
Bluetooth address: 000000000000
Unlocking phone.......Unsupported phone model

[stopcell]

Originally Posted by NsNobel2

Can you share the tested files or links?

first flash this xt1601 modem via fastboot xt1601 modem
shared key !cn3e602dRhVQZEqDhBDwpg
make unlock with sigmakey and flash this gsm rom Download
password for the rom: waqasiqbalg4play@123

[wcelgsm]

first flash this xt1601 modem via fastboot xt1601 modem
shared key !cn3e602dRhVQZEqDhBDwpg

[simpleprince49]

after unlock and flash shows this simcard is not from verison..and no signal

[A4L]

Originally Posted by simpleprince49

after unlock and flash shows this simcard is not from verison..and no signal

I have the same model with this problem. I've flashed it multiple times but still no signal.

[atou]

Originally Posted by stopcell

first flash this xt1601 modem via fastboot xt1601 modem
shared key !cn3e602dRhVQZEqDhBDwpg
make unlock with sigmakey and flash this gsm rom Download
password for the rom: waqasiqbalg4play@123

SigmaKey 2.29.13b1 Qcom: Direct unlock
Motorola QC Diag Port (COM11), Provider: Motorola, Driver ver.: 5.1.0.0, Date: 01/03/2013, USB\VID_22B8&PID_2EC1&REV_????&MI_00
Firmware: MPSS.DPM.2.0.2.c1.21-00008-M8936FAAAANUZM-1.64221.1.65386.2
Date: Aug 11 2016 18:01:15, Jul 30 2016 10:00:00, EAAAANVZ
Software IMEI: 354142073757780
Bluetooth address: 000000000000
Unlocking phone.......Unsupported phone model
i download and flash but not working

[Dzelailai]

Originally Posted by stopcell

first flash this xt1601 modem via fastboot xt1601 modem
shared key !cn3e602dRhVQZEqDhBDwpg
make unlock with sigmakey and flash this gsm rom Download
password for the rom: waqasiqbalg4play@123

pls bro how do i flash these files to phone? I used sigmabox but not accepting the files.

[bash_gentle]

Originally Posted by A4L

I have the same model with this problem. I've flashed it multiple times but still no signal.

please we should try to understand that before unlocking this model successfully. its requires following the step
while phone is off press vol- insert cable you will fastboot directly
open adb shell anywhere, and start by
1) fastboot erase modemst1
2)fastboot erase modemst2
from the folder you extracted the modem you downloaded for xt1601
right click open adb shell, use this command
3)fastboot flash modem NON-HLOS.bin
4) press vol- connect usb phone in fastboot use vol up or down scroll to bp tools press power dont disconnect usb untill phone reboot makesure u install
driver motorola qc diag
5)open sigma qcom interface select the phone from bar, click direct unlock,
6)after unlock flash your gsm modem 1 and 2 open fastboot in each modem file i.e 1 and 2 use this command, fastboot flash modem NON-HLOS.bin
7) download RSD lite put phone in fastboot and flash the firmware after flashing you will surelly see networt after 1 or 2 minute ihave unlocked many many perfectly dont forget to preess thanks buttom

[stephan6]

unlock done but its still shows sim card not from verizon and no service. what can i do

[ebberfunky]

Originally Posted by bash_gentle

please we should try to understand that before unlocking this model successfully. its requires following the step
while phone is off press vol- insert cable you will fastboot directly
open adb shell anywhere, and start by
1) fastboot erase modemst1
2)fastboot erase modemst2
from the folder you extracted the modem you downloaded for xt1601
right click open adb shell, use this command
3)fastboot flash modem NON-HLOS.bin
4) press vol- connect usb phone in fastboot use vol up or down scroll to bp tools press power dont disconnect usb untill phone reboot makesure u install
driver motorola qc diag
5)open sigma qcom interface select the phone from bar, click direct unlock,
6)after unlock flash your gsm modem 1 and 2 open fastboot in each modem file i.e 1 and 2 use this command, fastboot flash modem NON-HLOS.bin
7) download RSD lite put phone in fastboot and flash the firmware after flashing you will surelly see networt after 1 or 2 minute ihave unlocked many many perfectly dont forget to preess thanks buttom

error the previous imei returns before flash second modem.

[ghacks]

Originally Posted by stopcell

first flash this xt1601 modem via fastboot xt1601 modem
shared key !cn3e602dRhVQZEqDhBDwpg
make unlock with sigmakey and flash this gsm rom Download
password for the rom: waqasiqbalg4play@123

https://mega.nz/file/pz5FXICS#T5sF-ptx9zpZWxQzRTPDqQBtWOTvOnla6hubvxmc6Rg good link and password: waqasiqbalg4play@123