Vodafone 510 unlock problem - GSM-Forum

XPTO2511 · 04-24-2018, 16:03

SigmaKey 2.27.17 Qcom: Direct unlock
ZTE Handset Diagnostic Interface (COM260), Provider: ZTE Corporation, Driver ver.: 5.2066.1.14, Date: 24-05-2012, USB\VID_19D2&PID_0249&REV_0310&MI_00
Phone model: Vodafone Smart E8 VFD51x
Version: PT_MR1_VDF_P809V51V1.0.0B08,
Firmware: MPSS.JO.3.0-00291-8909_GEN_PACK-1.97872.1.98558.1
Date: Nov 27 2017 16:42:54, May 10 2017 19:00:00, 8909.gen
Connecting...Done
Restarting phone...Missing response from phone

I put the phone in FTM MODE but during the process the phone turn off ftm mode.

uajanath · 04-24-2018, 16:47

Select model in model list

XPTO2511 · 04-24-2018, 17:51

i select same result

GSM_Support · 04-25-2018, 08:01

@ XPTO2511,

Please make sure that:

Battery is fully charged
All the side programs, that may interfere with the phone, are closed
Phone’s cable and device itself should not be disconnected or disturbed until the procedure is fully completed
Connect phone to USB port placed on the backside of PC (motherboard's USB port)
Do not connect or disconnect other USB cables into the PC during the actual work with the phone
Avoid using any kind of USB HUBs and long USB cables. Use the shortest-length USB cable available.
Phone has stock (factory) firmware version
SIM card is removed
Repeat Unlock operation
Don't forget to select correct phone model from the list

Best Regards
GSMServer team

04-24-2018, 16:03	#1 (permalink)
XPTO2511 No Life Poster Join Date: Dec 2008 Posts: 1,488 Member: 934255 Status: Offline Thanks Meter: 63	Vodafone 510 unlock problem SigmaKey 2.27.17 Qcom: Direct unlock ZTE Handset Diagnostic Interface (COM260), Provider: ZTE Corporation, Driver ver.: 5.2066.1.14, Date: 24-05-2012, USB\VID_19D2&PID_0249&REV_0310&MI_00 Phone model: Vodafone Smart E8 VFD51x Version: PT_MR1_VDF_P809V51V1.0.0B08, Firmware: MPSS.JO.3.0-00291-8909_GEN_PACK-1.97872.1.98558.1 Date: Nov 27 2017 16:42:54, May 10 2017 19:00:00, 8909.gen Connecting...Done Restarting phone...Missing response from phone I put the phone in FTM MODE but during the process the phone turn off ftm mode.

04-25-2018, 08:01	#4 (permalink)
GSM_Support Product Supporter Join Date: Feb 2005 Location: GSMserver Team Posts: 36,980 Member: 121052 Status: Offline Sonork: 100.107126 Thanks Meter: 80,766	@ XPTO2511, Please make sure that: Battery is fully charged All the side programs, that may interfere with the phone, are closed Phone’s cable and device itself should not be disconnected or disturbed until the procedure is fully completed Connect phone to USB port placed on the backside of PC (motherboard's USB port) Do not connect or disconnect other USB cables into the PC during the actual work with the phone Avoid using any kind of USB HUBs and long USB cables. Use the shortest-length USB cable available. Phone has stock (factory) firmware version SIM card is removed Repeat Unlock operation Don't forget to select correct phone model from the list Best Regards GSMServer team

04-24-2018, 16:47	#2 (permalink)
uajanath No Life Poster Join Date: Jan 2010 Posts: 1,027 Member: 1211913 Status: Offline Thanks Meter: 423	Select model in model list

04-24-2018, 17:51	#3 (permalink)
XPTO2511 No Life Poster Join Date: Dec 2008 Posts: 1,488 Member: 934255 Status: Offline Thanks Meter: 63	i select same result