sigmakey soft and detect MTK in BROM mode - GSM-Forum

rebainoor · 02-28-2019, 18:08

sigma key can only detect preloader mode

some mtk sec boot need to be detected in BROM mode so all MTK mobile listed in sigmakey to rest frp in spft and need to boot in BROM mode will not work garantie

USB\VID_0E8D&PID_2000...........preloader mode

USB\VID_0E8D&PID_0003.............BROM mode

Shani3 · 03-01-2019, 07:15

sam prob

SigmaKey 2.29.14 MTK: Remove FRP (Moto C Plus (XT1723))
Connecting...Error opening serial port

FFX · 03-02-2019, 09:38

same problem with some mtk when performing FRP with Smartclip2

Dzomega · 03-02-2019, 20:13

me too same problem!!!

(((NAEEM))) · 03-02-2019, 21:41

sigma team is best.
but not working update bugssss....!!
like many model huawei 8.0 not sported problems
Sigma team policy not fix Bugssssssssszsssssssss

GSM_Support · 03-04-2019, 10:57

Current case is getting analyzed by product developers.

Best Regards
GSMServer team

Dzomega · 03-12-2019, 03:41

Connecting...Error opening serial port

when you fix this problem on MTK DRIVER LIKE ALCATEL 6062W...ETC

rebainoor · 03-13-2019, 16:30

SigmaKey v.2.30.01
xxxxxxxxx Sigma dongle 2.30, Initializing...OK
Pack 1: Activated
Pack 2: Activated
Pack 3: Activated
--------- 2019-03-13 16:28:05 ---------
SigmaKey 2.30.01 MTK: Remove FRP (Smartphone)
Connecting...Error 000007D5:02F5
--------- 2019-03-13 16:28:20 ---------
SigmaKey 2.30.01 MTK: Remove FRP (Smartphone)
Connecting...Error 000007D5:02F5
--------- 2019-03-13 16:28:40 ---------
SigmaKey 2.30.01 MTK: Remove FRP (Smartphone)
Connecting...Error 000007D5:02F5
--------- 2019-03-13 16:28:53 ---------
SigmaKey 2.30.01 MTK: Remove FRP (Smartphone)
Connecting...Error 000007D5:02F5

no think fixed

you need remove auto swith to metamode from soft

GSM_Support · 03-13-2019, 16:33

@ rebainoor,

Quote:

sigmakey soft cant detect MTK in BROM mode

This option is planned to be added in next update.

Best Regards
GSMServer team

Gsmserver · 03-19-2019, 13:01

Manual connection of your smartphone
We've added 4 options for manual connection of your smartphone:

Smartphone PID2000 - searching for PID 2000, standard all-in-one Download Agent;
Smartphone PID0003 - searching for PID 0003, standard all-in-one Download Agent;
Smartphone DA2000...- searching for PID 2000, manual selection of Download Agent, Authentication, and Preloader;
Smartphone DA0003... - searching for PID 0003, manual selection of Download Agent, Authentication, and Preloader.

Dzomega · 03-22-2019, 02:15

you update its nothing work on this sigma
SigmaKey v.2.30.02
184242134 Sigma dongle 2.30, Initializing...OK
Pack 1: Activated
Pack 2: Activated
Pack 3: Activated
--------- 2019-03-21 20:50:55 ---------
SigmaKey 2.30.02 MTK: Direct unlock (Alcatel 5052W)
Phone not found
--------- 2019-03-21 21:04:27 ---------
SigmaKey 2.30.02 MTK: Direct unlock (Alcatel 5052W)
Connecting...Error opening serial port
--------- 2019-03-21 21:05:53 ---------
SigmaKey 2.30.02 MTK: Direct unlock (Alcatel 5052W)
Connecting...Error opening serial port

I told you the problem its on software

other sofwtare FRG OR NCK OR CM2 WORK PERFECT WITH MTK

WILL 50DAY YOU CANT FIX IT!!

Dzomega · 03-22-2019, 02:30

Using library Brom_DLL_v7.1813.3
Searching phone in normal mode;
[connect the phone powered off to the usb cable]
Phone detected (MediaTek USB Port (COM7))
Preparing to start flash mode;
Preparing to open COM7
Requesting authorization;
Connecting;
Downloading DA;
Initializing;
Rid: df057ecc7137b2ccf68b74238730250a
Requesting baudrate change;
Done;
USB SPEED: USB_HIGH_SPEED
DEVICE INFO:
BB CHIP: MT6739 [CB00, 02, 6739, 00]
HW_STORAGE_EMMC: 0x51000115 0x4D333644 0x70CA0142 0x3DB583DE [SIZE=0x749400000]
IMEI1 [OTP 0001]: 015246-00-132***
IMEI2 [OTP 0001]: 000000-00-000000-0
PROVIDER: 5052W-2ATBUSE
USRDATA INFO: 0x133800000 SIZE: 0x6108FBE00

Searching data;
Checking server support license;
Bruteforcing ... relax ;-)
Buteforce took 00:03:25
Checking data integrity;
Data integrity: OK;
Rebuilding security;

Phone unlocked; Remove battery and cable;

Time needed - 00:03:37

Log file saved to: LOG_21_03_2019_21_29_37.txt

Dzomega · 03-23-2019, 02:49

you need to fix this problem like other software can catch the driver in 1st time .........

all other work perfect in mtk only sigma Software have this problem

Connecting...Error opening serial port
Connecting...Error opening serial port

GSM_Support · 03-25-2019, 13:41

We were able to recreate the problem on a very slow computer. So we improved work of SPTF method for MTK devices on slow PCs
Try with new Sigma build and post the results.

Best Regards
GSMServer team

Dzomega · 03-26-2019, 01:59

?pc slow???????????????????? the problem its not on pc

software can t catch the driver in 1st time ........... like other Software.

not problem in pc or driver

any way i will try

02-28-2019, 18:08	#1 (permalink)
rebainoor No Life Poster Join Date: Feb 2006 Location: In my LAB Posts: 3,162 Member: 231728 Status: Offline Thanks Meter: 2,102	sigmakey soft and detect MTK in BROM mode sigma key can only detect preloader mode some mtk sec boot need to be detected in BROM mode so all MTK mobile listed in sigmakey to rest frp in spft and need to boot in BROM mode will not work garantie USB\VID_0E8D&PID_2000...........preloader mode USB\VID_0E8D&PID_0003.............BROM mode Last edited by Gsmserver; 03-19-2019 at 13:02.

03-13-2019, 16:30	#8 (permalink)
rebainoor No Life Poster Join Date: Feb 2006 Location: In my LAB Posts: 3,162 Member: 231728 Status: Offline Thanks Meter: 2,102	SigmaKey v.2.30.01 fix what ? SigmaKey v.2.30.01 xxxxxxxxx Sigma dongle 2.30, Initializing...OK Pack 1: Activated Pack 2: Activated Pack 3: Activated --------- 2019-03-13 16:28:05 --------- SigmaKey 2.30.01 MTK: Remove FRP (Smartphone) Connecting...Error 000007D5:02F5 --------- 2019-03-13 16:28:20 --------- SigmaKey 2.30.01 MTK: Remove FRP (Smartphone) Connecting...Error 000007D5:02F5 --------- 2019-03-13 16:28:40 --------- SigmaKey 2.30.01 MTK: Remove FRP (Smartphone) Connecting...Error 000007D5:02F5 --------- 2019-03-13 16:28:53 --------- SigmaKey 2.30.01 MTK: Remove FRP (Smartphone) Connecting...Error 000007D5:02F5 no think fixed you need remove auto swith to metamode from soft

03-19-2019, 13:01	#10 (permalink)
Gsmserver Product Supporter Join Date: Feb 2003 Location: gsmserver Posts: 9,136 Member: 21077 Status: Offline Thanks Meter: 116,329	Manual connection of your smartphone We've added 4 options for manual connection of your smartphone: Smartphone PID2000 - searching for PID 2000, standard all-in-one Download Agent; Smartphone PID0003 - searching for PID 0003, standard all-in-one Download Agent; Smartphone DA2000...- searching for PID 2000, manual selection of Download Agent, Authentication, and Preloader; Smartphone DA0003... - searching for PID 0003, manual selection of Download Agent, Authentication, and Preloader.

03-01-2019, 07:15	#2 (permalink)
Shani3 No Life Poster Join Date: May 2011 Location: KPK Mardan Age: 36 Posts: 2,642 Member: 1582572 Status: Offline Sonork: 100.1609641 Thanks Meter: 573	sam prob SigmaKey 2.29.14 MTK: Remove FRP (Moto C Plus (XT1723)) Connecting...Error opening serial port

03-02-2019, 09:38	#3 (permalink)
FFX Freak Poster Join Date: Jun 2010 Location: Venezuela Posts: 313 Member: 1332792 Status: Offline Thanks Meter: 120	same problem with some mtk when performing FRP with Smartclip2

03-02-2019, 20:13	#4 (permalink)
Dzomega No Life Poster Join Date: Jun 2016 Location: UK Posts: 613 Member: 2581848 Status: Offline Thanks Meter: 249	me too same problem!!!

03-02-2019, 21:41	#5 (permalink)
(((NAEEM))) Freak Poster Join Date: Jun 2010 Location: ON Maind Posts: 499 Member: 1326581 Status: Offline Sonork: (((NAEEM))) Thanks Meter: 52	sigma team is best. but not working update bugssss....!! like many model huawei 8.0 not sported problems Sigma team policy not fix Bugssssssssszsssssssss

03-04-2019, 10:57	#6 (permalink)
GSM_Support Product Supporter Join Date: Feb 2005 Location: GSMserver Team Posts: 36,980 Member: 121052 Status: Offline Sonork: 100.107126 Thanks Meter: 80,766	Current case is getting analyzed by product developers. Best Regards GSMServer team

03-12-2019, 03:41	#7 (permalink)
Dzomega No Life Poster Join Date: Jun 2016 Location: UK Posts: 613 Member: 2581848 Status: Offline Thanks Meter: 249	Connecting...Error opening serial port when you fix this problem on MTK DRIVER LIKE ALCATEL 6062W...ETC

03-22-2019, 02:15	#11 (permalink)
Dzomega No Life Poster Join Date: Jun 2016 Location: UK Posts: 613 Member: 2581848 Status: Offline Thanks Meter: 249	you update its nothing work on this sigma SigmaKey v.2.30.02 184242134 Sigma dongle 2.30, Initializing...OK Pack 1: Activated Pack 2: Activated Pack 3: Activated --------- 2019-03-21 20:50:55 --------- SigmaKey 2.30.02 MTK: Direct unlock (Alcatel 5052W) Phone not found --------- 2019-03-21 21:04:27 --------- SigmaKey 2.30.02 MTK: Direct unlock (Alcatel 5052W) Connecting...Error opening serial port --------- 2019-03-21 21:05:53 --------- SigmaKey 2.30.02 MTK: Direct unlock (Alcatel 5052W) Connecting...Error opening serial port I told you the problem its on software other sofwtare FRG OR NCK OR CM2 WORK PERFECT WITH MTK WILL 50DAY YOU CANT FIX IT!!

03-22-2019, 02:30	#12 (permalink)
Dzomega No Life Poster Join Date: Jun 2016 Location: UK Posts: 613 Member: 2581848 Status: Offline Thanks Meter: 249	Using library Brom_DLL_v7.1813.3 Searching phone in normal mode; [connect the phone powered off to the usb cable] Phone detected (MediaTek USB Port (COM7)) Preparing to start flash mode; Preparing to open COM7 Requesting authorization; Connecting; Downloading DA; Initializing; Rid: df057ecc7137b2ccf68b74238730250a Requesting baudrate change; Done; USB SPEED: USB_HIGH_SPEED DEVICE INFO: BB CHIP: MT6739 [CB00, 02, 6739, 00] HW_STORAGE_EMMC: 0x51000115 0x4D333644 0x70CA0142 0x3DB583DE [SIZE=0x749400000] IMEI1 [OTP 0001]: 015246-00-132*** IMEI2 [OTP 0001]: 000000-00-000000-0 PROVIDER: 5052W-2ATBUSE USRDATA INFO: 0x133800000 SIZE: 0x6108FBE00 Searching data; Checking server support license; Bruteforcing ... relax ;-) Buteforce took 00:03:25 Checking data integrity; Data integrity: OK; Rebuilding security; Phone unlocked; Remove battery and cable; Time needed - 00:03:37 Log file saved to: LOG_21_03_2019_21_29_37.txt

03-23-2019, 02:49	#13 (permalink)
Dzomega No Life Poster Join Date: Jun 2016 Location: UK Posts: 613 Member: 2581848 Status: Offline Thanks Meter: 249	you need to fix this problem like other software can catch the driver in 1st time ......... all other work perfect in mtk only sigma Software have this problem Connecting...Error opening serial port Connecting...Error opening serial port

03-25-2019, 13:41	#14 (permalink)
GSM_Support Product Supporter Join Date: Feb 2005 Location: GSMserver Team Posts: 36,980 Member: 121052 Status: Offline Sonork: 100.107126 Thanks Meter: 80,766	We were able to recreate the problem on a very slow computer. So we improved work of SPTF method for MTK devices on slow PCs Try with new Sigma build and post the results. Best Regards GSMServer team

03-26-2019, 01:59	#15 (permalink)
Dzomega No Life Poster Join Date: Jun 2016 Location: UK Posts: 613 Member: 2581848 Status: Offline Thanks Meter: 249	?pc slow???????????????????? the problem its not on pc software can t catch the driver in 1st time ........... like other Software. not problem in pc or driver any way i will try