GSM-Forum

GSM-Forum (https://forum.gsmhosting.com/vbb/)
-   SigmaKey (https://forum.gsmhosting.com/vbb/f719/)
-   -   Succesful unlock ZTE P743T Orange Monte Carlo Negro (https://forum.gsmhosting.com/vbb/f719/succesful-unlock-zte-p743t-orange-monte-carlo-negro-1525260/)

Ivanovych_78 08-23-2012 07:15

Succesful unlock ZTE P743T Orange Monte Carlo Negro
 
ZTE P743T Orange Monte Carlo Negro

SigmaKey 1.10.02 Qcom: Direct unlock
Version: OSP_P743TV1.0.0B07, OSP_P743TV120110511
Firmware: M76XX-TSNCJOLYM-6050
Date: Dec 29 2011 04:36:09, Oct 26 2010 14:00:00, TSNCJOLY
IMEI: 8685430********
Security area saved to "C:\Documents and Settings\User\Мои документы\SigmaKey\security backup\8685430********_OSP_P743TV1_0_0B07 (0).skb"
Unlocking phone...Done
Restarting phone...Done

Alien-9 09-21-2012 16:00

What is unlock procedure? Which mode you put the phone in?

GSM_Support 09-21-2012 16:04

@ Alien-9,

Check detailed unlock manual for ZTE Qualcomm sets by following this link, please.

Best Regards
GSMServer team



http://www.smart-clip.com/img/sigma_userbar.png

cykada 03-05-2013 12:39

SigmaKey 1.20.03 Qcom: Direct unlock
ZTE Handset Diagnostic Interface(DFU) (COM761), Provider: ZTE Corporation, Driver ver.: 5.2066.1.8, Date: 2011-01-13
Version: OUK_P743TV1.0.0B25, OUK_P743TV120110106
Firmware: M76XX-TSNCJOLYM-6050
Date: Feb 13 2012 15:41:02, Oct 26 2010 14:00:00, TSNCJOLY
IMEI: 8685430xxxxxxxx
Bluetooth address: 86E2A34BD29C
Security area saved to "C:\Documents and Settings\cykada\Moje dokumenty\SigmaKey\security backup\868543000680942_OUK_P743TV1_0_0B25.skb"
Unlocking phone...Done
Restarting phone...Done

All OK :)

Ducdung76 11-23-2013 05:23

SigmaKey 1.31.01 Qcom: Direct unlock
ZTE Handset Diagnostic Interface(DFU) (COM23), Provider: ZTE Corporation, Driver ver.: 1.2066.1.3, Date: 4/29/2010, USB\Vid_19d2&Pid_0112&Rev_0227
Version: OSP_P743TV1.0.0B07, OSP_P743TV120110511
Firmware: M76XX-TSNCJOLYM-6050
Date: Dec 29 2011 04:36:09, Oct 26 2010 14:00:00, TSNCJOLY
IMEI: 868543002466571
Bluetooth address: 37E3B6CFE034
Security area saved to "D:\My Documents\SigmaKey\security backup\868543002466571_OSP_P743TV1_0_0B07.skb"
Done
Restarting phone...Done

crysst 12-02-2013 13:30

I have one orange monte carlo negro - Zte P743T and i cannot put in FTM mode...i try Vol down + power...not working ,...the phone enter in recovery mode, the camera or end call not exist, i try dial *983*87274# , nothing happend.....how can put this phone in FTM mode to unlock?

mcandre 12-02-2013 13:51

crysst, re-flash this phone to stock firmware and try once again

crysst 12-02-2013 13:54

where i can find stock firmware and what is the procedure?

mcandre 12-02-2013 14:01

1st of all, post here as much details about your phone as possible. Has it ever been flashed?
2nd: here's the file for Orange Monte Carlo

crysst 12-02-2013 14:10

My spanis is not so good , but if i understand , in instruction tell me to put phone in FTM mode to write flash inside

Guía rápida:
1. Acceder a la web ZTE Devices a través de siguiente link (Monte Carlo (Orange) - Support - ZTE Devices - Bringing you closer) y descargar archivo “DL_Monte_Carlo_SpainV1.00.00.zip”
2. Descomprimir archivo descargado, aparecerá un ejecutable “DL_Monte_Carlo_SpainV1.00.00.exe”, ejecutarlo para instalar la aplicación
3.Partiendo de terminal apagado, ponerlo en modo “FTM”, pulsar botón de volumen derecho mantenido + botón de encendido, una vez aparezca muñeco android en pantalla soltar botón de encendido pero mantener el de volumen hasta que aparezca “FTM”4.Conectar su terminal al ordenador a través de cable USB, esperar hasta que en la aplicación el icono OPEN se ponga en READY, entonces hacer clic en START
5.Comenzará a correr la barra de proceso y el READY se convertirá en RUNNING
6.NO TOCAR nada hasta que aparezca una ventana emergente que ponga “Download Succesful!”, pulsar en OK
7.El icono inferior derecho se pondrá en PASS, el terminal estará actualizado
8.Quitar batería e introducir tarjeta sim para volver a utilizar de nuevo su Orange Monte Carlo

mcandre 12-03-2013 10:18

I've used google translate here:
Quote:

1. Access the web ZTE Devices by following link (Monte Carlo ( Orange ) - Support - ZTE Devices - Bringing you closer ) and download file " DL_Monte_Carlo_SpainV1.00.00.zip "
Two . Unzip downloaded file, an executable " DL_Monte_Carlo_SpainV1.00.00.exe " appears , run it to install the application
3.Partiendo terminal off, put it in " FTM " mode, press the right button + volume button held once android doll appears on screen release power button but keep the volume until " FTM " appears 4.Connect your handset to your computer via USB cable, wait until the application is set to OPEN READY icon , then click on START
5.Comenzará to run the bar and the process will become READY RUNNING
6.NO TOUCH anything until a popup that reads " Download Succesful ! " Appears, click on OK
7.The bottom right icon will PASS, the terminal will be updated
8.Quitar battery and insert sim card back to use again your Orange Monte Carlo

crysst 12-03-2013 10:28

yes, and see at point 3, to flash the phone , must put in Ftm mode, how to do that?

mcandre 12-03-2013 10:34

Post here everything what you see in the phone's menu -> settings ->about the phone.

crysst 12-03-2013 10:54

Number model Skate

Android version 4.0.4

baseband version QCT unknown

kernel version 2.6.35.7 -perf+
tilal6991@localhost #1
thu jun 28 02:49:39 MST 2012

CPU ARMv6 compatible procesor rev 5

memory 420MB

CyanogenMod version
9-20120628-EXPERIMENTAL - skate- ColdfusionX-tilal6991

Build date thu jun 28 02:42:48 MST 2012

Build number cm_skate-eng 4.0.4 IMM76L eng tilal6991.20120628.024140 test-keys

mcandre 12-03-2013 11:33

Seems like you have ZTE Skate with modded firmware...


All times are GMT +1. The time now is 23:45.


vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2024 DragonByte Technologies Ltd.
- GSM Hosting Ltd. - 1999-2023 -

Page generated in 0.14812 seconds with 6 queries

SEO by vBSEO