vtelca n720 venezuela unlock ok - GSM-Forum

kervicell · 03-11-2013, 01:18

sigmakey team I have a model N720 Movilnet Venezuela Vtelca I failed to read the team is not for sale sigmakey,

checking the volume key - but the power button stays in the team's logo Movilnet frozen android driver asks me about which I have not installed them because the driver's manual and are not looking??? help

[IMG]http://2.bp.********.com/-dqRSO4BIxQA/UNSHXa0xmXI/AAAAAAAAAo4/UAW2WNpYxPk/s1600/android+bolivariano.jpg[/IMG]

mcandre · 03-11-2013, 09:11

Double check the unlocking manual.

Direct unlock for ZTE N720

Select "Qualcomm" platform from the tab menu in the upper left side of the software
Go to "Unlock" tab
Connect turned ON phone to PC with USB cable
Install required drivers (drivers will be installed from the phone automatically) only if the phone is connected for the first time
Select USB Diagnostic Port in the ports selection tab
Press "Unlock" button *

cdmakiller · 05-01-2013, 00:06

for repair imei, need steps how to

GSM_Support · 05-01-2013, 08:49

@ cdmakiller

Repair IMEI

Select "Qualcomm" platform from the tab menu in upper left side of the software
Go to "IMEI" tab
Install required Android USB Driver Installer (only if the phone is connected for the first time)
Set the phone to "FTM" mode
Connect the phone to PC with USB cable
Select ZTE Handset Diagnostic Interface in the ports selection
Press "Restore IMEI" button
The message "Done" indicates that procedure was completed successfully
Disconnect the handset

Best Regards
GSMServer team

hector bermudez · 10-30-2013, 22:52

SigmaKey 1.30.06
Sigma dongle 1.32, Initializing...OK
--- 2013-10-30 16:50:38 ---
SigmaKey 1.30.06 Qcom: Direct unlock
USB Diagnostics Port FFDA (COM52), Provider: Corporation, Driver ver.: 2.0.6.7, Date: 08/05/2011, USB\Vid_19d2&Pid_ffda&Rev_0226&MI_00
Firmware: Penguin N720_10_Z23_SP_TSDCD215B_04
Date: Oct 8 2011 12:44:35, May 16 2011 03:00:00, TSNCJOLY
IMEI: 3535770XXXXXXXXXXXX
Bluetooth address: 2273FC97C8FC
Security area saved to "C:\Documents and Settings\OROBAS-CALI\Mis documentos\SigmaKey\security backup\35357XXXXXX_Penguin N720_10_Z23_SP_TSDCD215B_04.skb"
Unlocking phone...Done
Restarting phone...Done

yurais · 10-24-2014, 21:47

somebody knows if is it possible to change the frecuency band to this phone to make it work on 900 mhz?

yurais · 11-11-2015, 15:41

I got another phone to unlock, but never got a reply if someone knows if band can be changed...
looks like there is no way?

03-11-2013, 01:18	#1 (permalink)
kervicell Freak Poster Join Date: Oct 2012 Location: transilvania Posts: 355 Member: 1820429 Status: Offline Thanks Meter: 57	vtelca n720 venezuela unlock ok sigmakey team I have a model N720 Movilnet Venezuela Vtelca I failed to read the team is not for sale sigmakey, checking the volume key - but the power button stays in the team's logo Movilnet frozen android driver asks me about which I have not installed them because the driver's manual and are not looking??? help [IMG]http://2.bp.********.com/-dqRSO4BIxQA/UNSHXa0xmXI/AAAAAAAAAo4/UAW2WNpYxPk/s1600/android+bolivariano.jpg[/IMG]

03-11-2013, 09:11	#2 (permalink)
mcandre No Life Poster Join Date: Mar 2006 Location: Central Europe Age: 39 Posts: 11,877 Member: 239548 Status: Offline Thanks Meter: 2,781	Double check the unlocking manual. Direct unlock for ZTE N720 Select "Qualcomm" platform from the tab menu in the upper left side of the software Go to "Unlock" tab Connect turned ON phone to PC with USB cable Install required drivers (drivers will be installed from the phone automatically) only if the phone is connected for the first time Select USB Diagnostic Port in the ports selection tab Press "Unlock" button *

05-01-2013, 08:49	#4 (permalink)
GSM_Support Product Supporter Join Date: Feb 2005 Location: GSMserver Team Posts: 36,980 Member: 121052 Status: Offline Sonork: 100.107126 Thanks Meter: 80,766	@ cdmakiller Repair IMEI Select "Qualcomm" platform from the tab menu in upper left side of the software Go to "IMEI" tab Install required Android USB Driver Installer (only if the phone is connected for the first time) Set the phone to "FTM" mode Connect the phone to PC with USB cable Select ZTE Handset Diagnostic Interface in the ports selection Press "Restore IMEI" button The message "Done" indicates that procedure was completed successfully Disconnect the handset Best Regards GSMServer team

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

05-01-2013, 00:06	#3 (permalink)
cdmakiller Freak Poster Join Date: Jan 2006 Posts: 258 Member: 225238 Status: Offline Thanks Meter: 16	for repair imei, need steps how to

10-30-2013, 22:52	#5 (permalink)
hector bermudez No Life Poster Join Date: Sep 2005 Location: Cali Colombia Age: 43 Posts: 622 Member: 181405 Status: Offline Thanks Meter: 249	SigmaKey 1.30.06 Sigma dongle 1.32, Initializing...OK --- 2013-10-30 16:50:38 --- SigmaKey 1.30.06 Qcom: Direct unlock USB Diagnostics Port FFDA (COM52), Provider: Corporation, Driver ver.: 2.0.6.7, Date: 08/05/2011, USB\Vid_19d2&Pid_ffda&Rev_0226&MI_00 Firmware: Penguin N720_10_Z23_SP_TSDCD215B_04 Date: Oct 8 2011 12:44:35, May 16 2011 03:00:00, TSNCJOLY IMEI: 3535770XXXXXXXXXXXX Bluetooth address: 2273FC97C8FC Security area saved to "C:\Documents and Settings\OROBAS-CALI\Mis documentos\SigmaKey\security backup\35357XXXXXX_Penguin N720_10_Z23_SP_TSDCD215B_04.skb" Unlocking phone...Done Restarting phone...Done

10-24-2014, 21:47	#6 (permalink)
yurais No Life Poster Join Date: Jan 2006 Location: Santiago de Cuba Age: 46 Posts: 3,672 Member: 220595 Status: Offline Thanks Meter: 355	somebody knows if is it possible to change the frecuency band to this phone to make it work on 900 mhz?

11-11-2015, 15:41	#7 (permalink)
yurais No Life Poster Join Date: Jan 2006 Location: Santiago de Cuba Age: 46 Posts: 3,672 Member: 220595 Status: Offline Thanks Meter: 355	I got another phone to unlock, but never got a reply if someone knows if band can be changed... looks like there is no way?