ZTE T96 unlock & help - GSM-Forum

edisonsuen · 03-08-2013, 05:52

the software read dump, but its size is about 128mb. how could i send?

ZTE Handset Diagnostic Interface (COM166), Provider: ZTE Corporation, Driver ver.: 5.2066.1.8, Date: 13/01/2011
Version: TEL_AU_P622C7V1.0.0B05-S, T96 TDec 04 2012
Firmware: TEL_AU_P622C7V1.0.0B05-S
Date: Dec 04 2012 15:43:24, Dec 30 2011 06:00:00, KPRZL
IMEI: 866417010109089
Bluetooth address: 47B302A8DFF8
Phone model: ZTE (Unknown)
Unknown firmware version. Do you want to try heuristic method (it may take several minutes)? [YES]
Using extended heuristic method...
Unfortunately, heuristic method have been failed.
In order to support this model, we have to read dump from your phone.
Are you ready (it may take several minutes)? [YES]
Connecting....Q62xx-OSBL
Please send
C:\Documents and Settings\PC User\My Documents\SigmaKey\temporary backup\866417010109089_TEL_AU_P622C7V1_0_0B05-S.skb
file to [email protected]
Restarting phone...Done

mcandre · 03-08-2013, 07:19

you may use 4shared.com

GSM_Support · 03-08-2013, 07:44

@ edisonsuen,

Please upload dump along with the log file to any filesharing web site and PM link for it to me.

Best Regards
GSMServer team

GSM_Support · 03-12-2013, 12:31

@ edisonsuen,

Today Sigma Software v1.20.04 was released.
Please run unlock operation with it and post results here.

Best Regards
GSMServer team

edisonsuen · 03-13-2013, 00:07

ZTE T96 unlocked done with sigmakey1.20.04

SigmaKey 1.20.04 Qcom: Direct unlock
ZTE Handset Diagnostic Interface (COM166), Provider: ZTE Corporation, Driver ver.: 5.2066.1.8, Date: 13/01/2011
Version: TEL_AU_P622C7V1.0.0B05-S, T96 TDec 04 2012
Firmware: TEL_AU_P622C7V1.0.0B05-S
Date: Dec 04 2012 15:43:24, Dec 30 2011 06:00:00, KPRZL
IMEI: 866417010109089
Bluetooth address: 47B302A8DFF8
Phone model: ZTE T96
Detecting flash...MICRON_MT29C1G12MADNAJC, ID: 002C00B1
Flash size: 128 Mb, page size: 2048
Reading security block...OK
Security area saved to "C:\Documents and Settings\PC User\My Documents\SigmaKey\security backup\866417010109089_TEL_AU_P622C7V1_0_0B05-S.skb"
Unlocking phone...Done
Restarting phone...Done

aukonline · 06-08-2014, 12:35

FIRST INSTALL DRIVER THEN SELECT QUALCOMM OPTION THEN CLICK UNLOCK

zulea912 · 01-12-2017, 09:02

dear sir
i try to unlock 301Z （Same phone ZTE T96）like this

can not unlock it can you help me？

Pack 2: Activated
--------- 2017-01-12 17:50:46 ---------
SigmaKey 2.14.03b3 Qcom: Direct unlock
ZTE Diagnostics Interface (COM86), Provider: ZTE Corporation, Driver ver.: 1.2074.0.7, Date: 2011/4/13, USB\VID_19D2&PID_0518&REV_0000&MI_01
Version: SBM_JP_P670A66V1.0.0B40_U-S, 30Feb 13 2015
Firmware: SBM_JP_P670A66V1.0.0B40_U-S
Date: Feb 13 2015 14:59:08, Dec 30 2011 06:00:00, KPRZL
IMEI: 864986001562128
Bluetooth address: 000000000000
Phone model: ZTE (Unknown)
Unknown firmware version. Do you want to try heuristic method (it may take several minutes)? [YES]
Using extended heuristic method...
Missing response from phone

GSM_Support · 01-12-2017, 09:22

@ zulea912
Please check this reminder and repeat required operations again.

Best Regards
GSMServer team

zulea912 · 02-16-2017, 15:03

hi GSMServer team
with 301z i did many times,but all faild.
ithink 301z firmware not same as T96.
can you teach me how can dump the 301z firmware?
if can dump the firmaware i can sent for you ,pls help thanks a lot

GSM_Support · 02-16-2017, 15:08

@ zulea912,

Close all running software, fully charge phone's battery and try once again.

Best Regards
GSMServer team

zulea912 · 03-15-2017, 09:54

Yes，i did but always this notes

SigmaKey 2.14.03b3 Qcom: Direct unlock
ZTE Diagnostics Interface (COM86), Provider: ZTE Corporation, Driver ver.: 1.2074.0.7, Date: 2011/4/13, USB\VID_19D2&PID_0518&REV_0000&MI_01
Version: SBM_JP_P670A66V1.0.0B40_U-S, 30Feb 13 2015
Firmware: SBM_JP_P670A66V1.0.0B40_U-S
Date: Feb 13 2015 14:59:08, Dec 30 2011 06:00:00, KPRZL
IMEI: 864986001562128
Bluetooth address: 000000000000
Phone model: ZTE (Unknown)
Unknown firmware version. Do you want to try heuristic method (it may take several minutes)? [YES]
Using extended heuristic method...
Missing response from phone

Quote:

Originally Posted by GSM_Support

@ zulea912,

Close all running software, fully charge phone's battery and try once again.

Best Regards
GSMServer team

GSM_Support · 03-15-2017, 10:02

@ zulea912,

Download and install latest SigmaKey software, re-install drivers and repeat operation.

Best Regards
GSMServer team

zulea912 · 04-30-2017, 15:54

Quote:

Originally Posted by GSM_Support

@ zulea912,

Download and install latest SigmaKey software, re-install drivers and repeat operation.

Best Regards
GSMServer team

have try many times，but same message

SigmaKey 2.14.03b3 Qcom: Direct unlock
ZTE Diagnostics Interface (COM86), Provider: ZTE Corporation, Driver ver.: 1.2074.0.7, Date: 2011/4/13, USB\VID_19D2&PID_0518&REV_0000&MI_01
Version: SBM_JP_P670A66V1.0.0B40_U-S, 30Feb 13 2015
Firmware: SBM_JP_P670A66V1.0.0B40_U-S
Date: Feb 13 2015 14:59:08, Dec 30 2011 06:00:00, KPRZL
IMEI: 864986001562128
Bluetooth address: 000000000000
Phone model: ZTE (Unknown)
Unknown firmware version. Do you want to try heuristic method (it may take several minutes)? [YES]
Using extended heuristic method...
Missing response from phone

GSM_Support · 05-02-2017, 08:00

@ zulea912,

According to the provided information you are using Sigma Software 2.14.03b3 that was released on the 2015-12-22.
Latest Sigma Software version is 2.25.01
Install latest SigmaKey software and repeat operation once again.

Best Regards
GSMServer team

03-08-2013, 05:52	#1 (permalink)
edisonsuen Freak Poster Join Date: Mar 2008 Posts: 353 Member: 721542 Status: Offline Thanks Meter: 42	ZTE T96 unlock & help the software read dump, but its size is about 128mb. how could i send? ZTE Handset Diagnostic Interface (COM166), Provider: ZTE Corporation, Driver ver.: 5.2066.1.8, Date: 13/01/2011 Version: TEL_AU_P622C7V1.0.0B05-S, T96 TDec 04 2012 Firmware: TEL_AU_P622C7V1.0.0B05-S Date: Dec 04 2012 15:43:24, Dec 30 2011 06:00:00, KPRZL IMEI: 866417010109089 Bluetooth address: 47B302A8DFF8 Phone model: ZTE (Unknown) Unknown firmware version. Do you want to try heuristic method (it may take several minutes)? [YES] Using extended heuristic method... Unfortunately, heuristic method have been failed. In order to support this model, we have to read dump from your phone. Are you ready (it may take several minutes)? [YES] Connecting....Q62xx-OSBL Please send C:\Documents and Settings\PC User\My Documents\SigmaKey\temporary backup\866417010109089_TEL_AU_P622C7V1_0_0B05-S.skb file to [email protected] Restarting phone...Done

06-08-2014, 12:35	#6 (permalink)
aukonline No Life Poster Join Date: Mar 2005 Location: gsmwebstore Posts: 1,775 Member: 125366 Status: Offline Sonork: 100.1602649 Thanks Meter: 98	Zte t96 unlock done FIRST INSTALL DRIVER THEN SELECT QUALCOMM OPTION THEN CLICK UNLOCK

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

03-08-2013, 07:19	#2 (permalink)
mcandre No Life Poster Join Date: Mar 2006 Location: Central Europe Age: 33 Posts: 9,408 Member: 239548 Status: Offline Thanks Meter: 1,972	you may use 4shared.com

03-08-2013, 07:44	#3 (permalink)
GSM_Support Product Supporter Join Date: Feb 2005 Location: GSMserver Team Posts: 29,853 Member: 121052 Status: Offline Sonork: 100.107126 Thanks Meter: 58,779	@ edisonsuen, Please upload dump along with the log file to any filesharing web site and PM link for it to me. Best Regards GSMServer team

03-12-2013, 12:31	#4 (permalink)
GSM_Support Product Supporter Join Date: Feb 2005 Location: GSMserver Team Posts: 29,853 Member: 121052 Status: Offline Sonork: 100.107126 Thanks Meter: 58,779	@ edisonsuen, Today Sigma Software v1.20.04 was released. Please run unlock operation with it and post results here. Best Regards GSMServer team

03-13-2013, 00:07	#5 (permalink)
edisonsuen Freak Poster Join Date: Mar 2008 Posts: 353 Member: 721542 Status: Offline Thanks Meter: 42	ZTE T96 unlocked done with sigmakey1.20.04 SigmaKey 1.20.04 Qcom: Direct unlock ZTE Handset Diagnostic Interface (COM166), Provider: ZTE Corporation, Driver ver.: 5.2066.1.8, Date: 13/01/2011 Version: TEL_AU_P622C7V1.0.0B05-S, T96 TDec 04 2012 Firmware: TEL_AU_P622C7V1.0.0B05-S Date: Dec 04 2012 15:43:24, Dec 30 2011 06:00:00, KPRZL IMEI: 866417010109089 Bluetooth address: 47B302A8DFF8 Phone model: ZTE T96 Detecting flash...MICRON_MT29C1G12MADNAJC, ID: 002C00B1 Flash size: 128 Mb, page size: 2048 Reading security block...OK Security area saved to "C:\Documents and Settings\PC User\My Documents\SigmaKey\security backup\866417010109089_TEL_AU_P622C7V1_0_0B05-S.skb" Unlocking phone...Done Restarting phone...Done

01-12-2017, 09:02	#7 (permalink)
zulea912 Junior Member Join Date: Jan 2006 Posts: 15 Member: 219365 Status: Offline Thanks Meter: 0	dear sir i try to unlock 301Z （Same phone ZTE T96）like this can not unlock it can you help me？ Pack 2: Activated --------- 2017-01-12 17:50:46 --------- SigmaKey 2.14.03b3 Qcom: Direct unlock ZTE Diagnostics Interface (COM86), Provider: ZTE Corporation, Driver ver.: 1.2074.0.7, Date: 2011/4/13, USB\VID_19D2&PID_0518&REV_0000&MI_01 Version: SBM_JP_P670A66V1.0.0B40_U-S, 30Feb 13 2015 Firmware: SBM_JP_P670A66V1.0.0B40_U-S Date: Feb 13 2015 14:59:08, Dec 30 2011 06:00:00, KPRZL IMEI: 864986001562128 Bluetooth address: 000000000000 Phone model: ZTE (Unknown) Unknown firmware version. Do you want to try heuristic method (it may take several minutes)? [YES] Using extended heuristic method... Missing response from phone

01-12-2017, 09:22	#8 (permalink)
GSM_Support Product Supporter Join Date: Feb 2005 Location: GSMserver Team Posts: 29,853 Member: 121052 Status: Offline Sonork: 100.107126 Thanks Meter: 58,779	@ zulea912 Please check this reminder and repeat required operations again. Best Regards GSMServer team

02-16-2017, 15:03	#9 (permalink)
zulea912 Junior Member Join Date: Jan 2006 Posts: 15 Member: 219365 Status: Offline Thanks Meter: 0	hi GSMServer team with 301z i did many times,but all faild. ithink 301z firmware not same as T96. can you teach me how can dump the 301z firmware? if can dump the firmaware i can sent for you ,pls help thanks a lot

02-16-2017, 15:08	#10 (permalink)
GSM_Support Product Supporter Join Date: Feb 2005 Location: GSMserver Team Posts: 29,853 Member: 121052 Status: Offline Sonork: 100.107126 Thanks Meter: 58,779	@ zulea912, Close all running software, fully charge phone's battery and try once again. Best Regards GSMServer team

03-15-2017, 10:02	#12 (permalink)
GSM_Support Product Supporter Join Date: Feb 2005 Location: GSMserver Team Posts: 29,853 Member: 121052 Status: Offline Sonork: 100.107126 Thanks Meter: 58,779	@ zulea912, Download and install latest SigmaKey software, re-install drivers and repeat operation. Best Regards GSMServer team

05-02-2017, 08:00	#14 (permalink)
GSM_Support Product Supporter Join Date: Feb 2005 Location: GSMserver Team Posts: 29,853 Member: 121052 Status: Offline Sonork: 100.107126 Thanks Meter: 58,779	@ zulea912, According to the provided information you are using Sigma Software 2.14.03b3 that was released on the 2015-12-22. Latest Sigma Software version is 2.25.01 Install latest SigmaKey software and repeat operation once again. Best Regards GSMServer team