2 phone spd 6531 all dead by volcano. **** - GSM-Forum

tjien_siangs · 04-27-2014, 13:02

I have 2 phone, all of different products, but same cpu spd 6531, both is only PHONELOCK.
After read flash and detect code all phone cant on again.
1st phone read code done but cant on, after i flashing the backup, the phone still dead.
2nd phone read code done but cant on too, after it i try to flashing with backup but 0% no luck.

Read Flash is risky and block it temporarily.If you want to force Read please choose bautrate 1843200.
Ready to read/write again, please remove the power supply clip or battery and then re-loaded it.
Detection initiated...
Vcc: 3
Gnd: 9 12
Analyzing D+ and D-...
D+ = 4, D- = 5
Analyzing USB device, please wait...
Find USB device:SCI USB2Serial (COM13), (VID_1782&PID_4D00)

Internal version: SPRD3
Boot downloaded.
Start boot please wait a moment....
Spreadtrum Boot Block version 1.2
CPU TYPE:SC6531 [65310000]
FLASH ID: 00EF004000160000
Flash Type:[WinBond] W25Q32BV
Size:0x400000(4MB)
Reading completed.
The data has been saved in C:\Documents and Settings\gudan\My Documents\_20140428_045418_FullFlash.bin, size: 4 M.
Detection initiated...
Vcc: 3
Gnd: 9 12
Analyzing D+ and D-...
D+ = 4, D- = 5
Analyzing USB device, please wait...
Find USB device:SCI USB2Serial (COM13), (VID_1782&PID_4D00)

Internal version: SPRD3
Boot downloaded.
Start boot please wait a moment....
Spreadtrum Boot Block version 1.2
CPU TYPE:SC6531 [65310000]
FLASH ID: 00EF004000160000
Flash Type:[WinBond] W25Q32BV
Size:0x400000(4MB)
>>Writing...(0)

Artyr · 04-27-2014, 13:28

what you want says to us?
if you want repair phone-find dump and flash with new version

kenecee · 04-27-2014, 14:05

Quote:

Originally Posted by tjien_siangs

I have 2 phone, all of different products, but same cpu spd 6531, both is only PHONELOCK.
After read flash and detect code all phone cant on again.
1st phone read code done but cant on, after i flashing the backup, the phone still dead.
2nd phone read code done but cant on too, after it i try to flashing with backup but 0% no luck.

Read Flash is risky and block it temporarily.If you want to force Read please choose bautrate 1843200.
Ready to read/write again, please remove the power supply clip or battery and then re-loaded it.
Detection initiated...
Vcc: 3
Gnd: 9 12
Analyzing D+ and D-...
D+ = 4, D- = 5
Analyzing USB device, please wait...
Find USB device:SCI USB2Serial (COM13), (VID_1782&PID_4D00)

Internal version: SPRD3
Boot downloaded.
Start boot please wait a moment....
Spreadtrum Boot Block version 1.2
CPU TYPE:SC6531 [65310000]
FLASH ID: 00EF004000160000
Flash Type:[WinBond] W25Q32BV
Size:0x400000(4MB)
Reading completed.
The data has been saved in C:\Documents and Settings\gudan\My Documents\_20140428_045418_FullFlash.bin, size: 4 M.
Detection initiated...
Vcc: 3
Gnd: 9 12
Analyzing D+ and D-...
D+ = 4, D- = 5
Analyzing USB device, please wait...
Find USB device:SCI USB2Serial (COM13), (VID_1782&PID_4D00)

Internal version: SPRD3
Boot downloaded.
Start boot please wait a moment....
Spreadtrum Boot Block version 1.2
CPU TYPE:SC6531 [65310000]
FLASH ID: 00EF004000160000
Flash Type:[WinBond] W25Q32BV
Size:0x400000(4MB)
>>Writing...(0)

I had the same problem,same 6531. three phones dead after phone unlock. I think volcano is not good with spd.

Qaisar Mahmood · 04-27-2014, 14:54

whats software ver you use?

BR
Qaisar Mahmood

tjien_siangs · 04-28-2014, 09:20

I use version 2.6.2.

netmos · 04-28-2014, 10:54

I have 2 spd 6531 dead whith ver 2.6.2 i need firm
1 samsung i9300 16mo mocor_12b_6531.w13.07
2 nokia c9

khurram136 · 04-28-2014, 11:43

bro volcano v.2.6.0 .v2.6.1 v2.6.2 same problem read file set dead you try to old v 2.4.6 use. read file ok phone or write youer problem solved

http://forum.gsmhosting.com/vbb/f723...-dead-1804060/

Azhabad · 04-29-2014, 04:53

Any speed, anyversion, if u see Writing...(0)
fone will be dead by volcano 100%

no way to repair

obummuo · 04-29-2014, 09:52

Quote:

Originally Posted by Qaisar Mahmood

whats software ver you use?

BR
Qaisar Mahmood

I used version 2.6.2. Three phones are completely dead just to remove phone lock. I think There are many phone killing bugs in that version.

.::MAHABUB::. · 04-29-2014, 10:27

use this version VolcanoTool_v2.3.9 than its works 100% also use win_XP .

mobite · 04-29-2014, 10:33

no mobile dead in volcanobox latest version use correctly

04-27-2014, 13:02	#1 (permalink)
tjien_siangs Freak Poster Join Date: Oct 2011 Posts: 154 Member: 1665634 Status: Offline Thanks Meter: 7	2 phone spd 6531 all dead by volcano. **** I have 2 phone, all of different products, but same cpu spd 6531, both is only PHONELOCK. After read flash and detect code all phone cant on again. 1st phone read code done but cant on, after i flashing the backup, the phone still dead. 2nd phone read code done but cant on too, after it i try to flashing with backup but 0% no luck. Read Flash is risky and block it temporarily.If you want to force Read please choose bautrate 1843200. Ready to read/write again, please remove the power supply clip or battery and then re-loaded it. Detection initiated... Vcc: 3 Gnd: 9 12 Analyzing D+ and D-... D+ = 4, D- = 5 Analyzing USB device, please wait... Find USB device:SCI USB2Serial (COM13), (VID_1782&PID_4D00) Internal version: SPRD3 Boot downloaded. Start boot please wait a moment.... Spreadtrum Boot Block version 1.2 CPU TYPE:SC6531 [65310000] FLASH ID: 00EF004000160000 Flash Type:[WinBond] W25Q32BV Size:0x400000(4MB) Reading completed. The data has been saved in C:\Documents and Settings\gudan\My Documents\_20140428_045418_FullFlash.bin, size: 4 M. Detection initiated... Vcc: 3 Gnd: 9 12 Analyzing D+ and D-... D+ = 4, D- = 5 Analyzing USB device, please wait... Find USB device:SCI USB2Serial (COM13), (VID_1782&PID_4D00) Internal version: SPRD3 Boot downloaded. Start boot please wait a moment.... Spreadtrum Boot Block version 1.2 CPU TYPE:SC6531 [65310000] FLASH ID: 00EF004000160000 Flash Type:[WinBond] W25Q32BV Size:0x400000(4MB) >>Writing...(0)

04-28-2014, 09:20	#5 (permalink)
tjien_siangs Freak Poster Join Date: Oct 2011 Posts: 154 Member: 1665634 Status: Offline Thanks Meter: 7	i use versi 2.6.2 I use version 2.6.2.

04-27-2014, 13:28	#2 (permalink)
Artyr Insane Poster Join Date: Dec 2012 Posts: 79 Member: 1859138 Status: Offline Thanks Meter: 20	what you want says to us? if you want repair phone-find dump and flash with new version

04-27-2014, 14:54	#4 (permalink)
Qaisar Mahmood No Life Poster Join Date: Jan 2006 Location: Pakistan Posts: 15,094 Member: 226457 Status: Offline Sonork: No more used Thanks Meter: 14,934	whats software ver you use? BR Qaisar Mahmood

04-28-2014, 10:54	#6 (permalink)
netmos Freak Poster Join Date: Feb 2006 Location: MOSTAGANEM Age: 41 Posts: 288 Member: 232928 Status: Offline Thanks Meter: 124	I have 2 spd 6531 dead whith ver 2.6.2 i need firm 1 samsung i9300 16mo mocor_12b_6531.w13.07 2 nokia c9

04-28-2014, 11:43	#7 (permalink)
khurram136 Freak Poster Join Date: Aug 2011 Posts: 497 Member: 1639426 Status: Offline Sonork: khurram136 Thanks Meter: 94	bro volcano v.2.6.0 .v2.6.1 v2.6.2 same problem read file set dead you try to old v 2.4.6 use. read file ok phone or write youer problem solved http://forum.gsmhosting.com/vbb/f723...-dead-1804060/

04-29-2014, 04:53	#8 (permalink)
Azhabad Junior Member Join Date: Apr 2014 Posts: 4 Member: 2173958 Status: Offline Thanks Meter: 0	Any speed, anyversion, if u see Writing...(0) fone will be dead by volcano 100% no way to repair

04-29-2014, 10:27	#10 (permalink)
.::MAHABUB::. No Life Poster Join Date: Jan 2009 Location: JESSORE, BNGLADESH. Age: 39 Posts: 1,098 Member: 939797 Status: Offline Sonork: 100.1601089 Thanks Meter: 359	use this version VolcanoTool_v2.3.9 than its works 100% also use win_XP .

04-29-2014, 10:33	#11 (permalink)
mobite No Life Poster Join Date: Aug 2012 Location: MUMBAI-METRO Age: 37 Posts: 1,290 Member: 1800009 Status: Offline Sonork: 100.1654307 Thanks Meter: 806	no mobile dead in volcanobox latest version use correctly