Android Modifide Magic Cable

[rajkilotra]

unable to read spreadtrum with volcano help

[sweet4hamza]

Originally Posted by rajkilotra

unable to read spreadtrum with volcano help

only format and imei supported yet
and do format your own risk bec
read and write flash not supported yet

[Gsmbizz]

Only for adnroid.????

[umarnlw]

Originally Posted by umesh gaba

SPD Android modifide Cable

use this cable, no need press any boot key in any spd phone

insert this usb cable(switch off with battery) and see in device manager,your mobile is connected

1-VCC
2-D-
3-D+
4- EMPTY IN CA101 NOKIA USB CABLE
5 GND

JOINT GND TO EMPTY POINT OR TWO WIRE SOLDERING, IF YOU JOINT BOTH WIRE YOUR CABLE IS MODIFIDE CABLE,IF DISSCONNECTED YOUR CABLE IS NORMAL CA101 CABLE

joint this empty point to gnd in ca 101 nokia usb cable

how to use the cable for read write flash or write imei

read write flash

1- open volcano
2-select spd tab and coreect boot acording to your phone cpu 6600,6610,6800,6820,6530
3-tick any option read,write,format
4-untick auto detact pinout
5-insert this usb cable
6-see in device manager com port
7 -com port automaticly refresh in volcano software(if not refresh automaticly please refresh or select manuly)
8-run

br

umesh gaba

Dear sir
can we use set pinout methed in detect tab,As Volcanobox make any UART Cable or any Ignition cable for Samsung , LG etc???????????????

[089999945]

for me very try modify usb but still show usb not reconize
when i connect with phone.
pls help me all user and team,thanks

[089999945]

i follow this picture



when i connect phone show like this



pls help me all user and team
thanks

[rajkilotra]

Originally Posted by dey mobiles

Thanks umesh ji great work

bhai i need ur help ,,,,,,,,,,,,
i donot know how to operate volcano box
i hav
1 volcano setup install 2.02.3
2. then

[fahad ali khan]

@ rajkilotra r u new user ??/
u have whats problem brother in volcano conect me i solved your problem via TeamViewer

Ad me ([email protected])
Skype id (Fahad.Alikhan1)

[abdul_hayee]

q mobile a8 without batery read information boot download stop on 99% how to solve?
THANKS

[Umesh_Arora]

5 pin in usb cable red color wire
1-vcc + supply
2- d-
3-d+
4 -empty
5-gnd -- supply black color wire

joint 4 to 5 pin
empty pin to gnd black wire

[CoMoBat]

Originally Posted by umesh gaba

5 pin in usb cable red color wire
1-vcc + supply
2- d-
3-d+
4 -empty
5-gnd -- supply black color wire

joint 4 to 5 pin
empty pin to gnd black wire

I make this jumper on cable...
but phone not detect in device manager...

and I have one question :
for detect phone to box, phone must be on or off?
how I use it?

[laxmi kamlesh]

Originally Posted by umesh gaba

5 pin in usb cable red color wire
1-vcc + supply
2- d-
3-d+
4 -empty
5-gnd -- supply black color wire

joint 4 to 5 pin
empty pin to gnd black wire

Sir,

See Here ..

1. vcc , Vbatt
2.D- ,Usb d-,DM
3.D+ ,usb d+ ,DP
4.Boot pin ( test on Karbonn k9 New modal )
5. Gnd pin

Thx..Now Its Clear..

[rajkilotra]

cool sand cpu error
Detection initiated, connect the phone and power on it...
Vcc: 5
Gnd: 8
RX: 3, TX: 4


>>Analysis of USB port,Press 0 key and insert the data cable.

[marvin62]

it is same as mini usb cable ?

[ar.vill]

it's awesome discovery, thank you so much Sir.

I've remember the work of akhil_bbsr during i encountered my problem of a1+ karbonn phone and was also solved.

both the two of you are great....