comio c2 lite pattern unlock not succsess with inferno - GSM-Forum

javed 12 · 07-18-2018, 14:05

>>Current Task:
Read Information(Extend)
>>Ver:1.5.4
>>
>>HIGH BOOT
>>
>>Operation:
1. Power off the phone.
2. Please insert USB cable within 40 seconds.
>>
>>MediaTek PreLoader USB VCOM (Android) (COM8)
>>
>>Connecting...
>>CPU TYPE:MT6735
>>Hardware version:CA00
>>Software version:0000
>>SecCfgVal :0x01000000
>>BromVersion :0xFF
>>BLVersion :0x01
>>Boot downloading complete!
>>Cannot connect with the phone, the program has terminated.

>>Read phone info Failed.

>>Elapsed time: 00:00:10.

Bell666 · 07-18-2018, 14:08

Not success because you don't know how to do it.

appel.expart · 07-18-2018, 14:10

Quote:

Originally Posted by bell666

not success because you don't know how to do it.

change boot one by one and try

javed 12 · 07-18-2018, 14:30

ok then tell me what can i do

javed 12 · 07-18-2018, 14:54

Quote:

Originally Posted by Bell666

Not success because you don't know how to do it.

tell me the solution dont tell the excusis set in my hand tell me how to unlock pattern

Bell666 · 07-18-2018, 14:56

For pattern just hard reset the phone.

For FRP.

Select custom boot. Click Unlock Phone. Click Unlock(USB). Click Clear FRP(EMMC). Select custom boot file. When asking for AUTH Click cancel.

If you don't have custom boot file use SP Flash Tool with preloader and scatter file to format FRP. Connect in BROM mode by pressing volume down button when connecting the cable. Look at this video.

https://www.youtube.com/watch?v=dwo7FF2Z-FA

For pattern just hard reset the phone.

javed 12 · 07-18-2018, 15:04

this is with firmware solution where are da file dont tell other solution where is inferno tool solution

Bell666 · 07-18-2018, 15:11

You can search for the DA file and then post it here for all of us.

Bell666 · 07-18-2018, 18:12

If you have the secure DA file Inferno can do anything. So it's not an Inferno Tool problem. It's your problem.

kamal_singla · 07-18-2018, 18:17

this model no need da
Just need emi setting+brom connectivity
Which not supported in Inferno..

javed 12 · 07-19-2018, 07:13

Quote:

Originally Posted by Bell666

You can search for the DA file and then post it here for all of us.

i was asking for solution with inferno i was ask inferno team team not for your bla bla bla

javed 12 · 07-19-2018, 07:16

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 54 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6735
BB_CPU_NME : [MediaTek] MT6735_S00
BB_CPU_EXT : 0xCA00 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x01000000
BromVer : 0x0005
BLVersion : 0x00FE
PreLoader : NOT Active [ Erased ]
BootLdrSS : SIGNED with SPRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_GRACY_ELEC
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x9B
NAND Flash : NOT INSTALLED
eMMC Flash : 4400014531303446D8A60136B51B6CD8
Initialize Memory ...
DRAM configured from IDB!
DRAM initialize passed!
DRAM size : 0x80000000
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x45 , OEM : 0100
[eMMC] : FLASH_INF : [SANDISK] , 6104F
[eMMC] : FLASH_CID : 45010044463430313601A6D8D86C64B5
[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00400000
[eMMC] : FLASH_LEN : 0x00000003AB400000
[eMMC] : FLASH_UCP : 15028 MiB [eMMC 16 GiB]
DEV RID : 0x0A2233AFE59530F0A828B4E647DAE2C6
INT RAM : 0x00020000
EXT RAM : 0x80000000 [2 GiB]
BOOT TYPE : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

Clear FRP ( Google Reset Protection )
Clear Ok!

Done!
Elapsed: 00:00:21
Reconnect Power/Cable!

some other team cm*** already done this why inferno not

ka4bygame · 07-19-2018, 07:54

Only because need Da file.
If you have Da file .
I believe inferno also can done.

wintertrop · 07-19-2018, 08:40

Quote:

Originally Posted by javed 12

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 54 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6735
BB_CPU_NME : [MediaTek] MT6735_S00
BB_CPU_EXT : 0xCA00 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x01000000
BromVer : 0x0005
BLVersion : 0x00FE
PreLoader : NOT Active [ Erased ]
BootLdrSS : SIGNED with SPRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_GRACY_ELEC
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x9B
NAND Flash : NOT INSTALLED
eMMC Flash : 4400014531303446D8A60136B51B6CD8
Initialize Memory ...
DRAM configured from IDB!
DRAM initialize passed!
DRAM size : 0x80000000
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x45 , OEM : 0100
[eMMC] : FLASH_INF : [SANDISK] , 6104F
[eMMC] : FLASH_CID : 45010044463430313601A6D8D86C64B5
[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00400000
[eMMC] : FLASH_LEN : 0x00000003AB400000
[eMMC] : FLASH_UCP : 15028 MiB [eMMC 16 GiB]
DEV RID : 0x0A2233AFE59530F0A828B4E647DAE2C6
INT RAM : 0x00020000
EXT RAM : 0x80000000 [2 GiB]
BOOT TYPE : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

Clear FRP ( Google Reset Protection )
Clear Ok!

Done!
Elapsed: 00:00:21
Reconnect Power/Cable!

some other team cm*** already done this why inferno not

because they have already the DA files for the said unit, some users provide the DA files for them and know how to find the files. Users around the globe have different brand of phone uses in their country, possibly the brand of phone in your hand is not available in inferno teams country, so they having difficulty to find the DA files, it is very important the cooperation of every users for the tools can support most phones around the globe, it is also up to every users like you how to find DA files for your unit coz they dont have the unit for sample. phone manufacturerrs, rebrands their unit when they distributed it to different country, so be smart how to find DA files.

javed 12 · 07-19-2018, 10:00

tell me how to provide da file for inferno team da file is in the factory firmware or other way to read it

07-18-2018, 14:05	#1 (permalink)
javed 12 No Life Poster Join Date: Apr 2013 Location: india Posts: 625 Member: 1911060 Status: Offline Sonork: [email protected] Thanks Meter: 303	comio c2 lite pattern unlock not succsess with inferno >>Current Task: Read Information(Extend) >>Ver:1.5.4 >> >>HIGH BOOT >> >>Operation: 1. Power off the phone. 2. Please insert USB cable within 40 seconds. >> >>MediaTek PreLoader USB VCOM (Android) (COM8) >> >>Connecting... >>CPU TYPE:MT6735 >>Hardware version:CA00 >>Software version:0000 >>SecCfgVal :0x01000000 >>BromVersion :0xFF >>BLVersion :0x01 >>Boot downloading complete! >>Cannot connect with the phone, the program has terminated. >>Read phone info Failed. >>Elapsed time: 00:00:10.

07-18-2018, 14:08	#2 (permalink)
Bell666 No Life Poster Join Date: Feb 2012 Posts: 762 Member: 1718440 Status: Offline Thanks Meter: 620	Not success because you don't know how to do it.

07-18-2018, 14:30	#4 (permalink)
javed 12 No Life Poster Join Date: Apr 2013 Location: india Posts: 625 Member: 1911060 Status: Offline Sonork: [email protected] Thanks Meter: 303	ok then tell me what can i do

07-18-2018, 14:56	#6 (permalink)
Bell666 No Life Poster Join Date: Feb 2012 Posts: 762 Member: 1718440 Status: Offline Thanks Meter: 620	For pattern just hard reset the phone. For FRP. Select custom boot. Click Unlock Phone. Click Unlock(USB). Click Clear FRP(EMMC). Select custom boot file. When asking for AUTH Click cancel. If you don't have custom boot file use SP Flash Tool with preloader and scatter file to format FRP. Connect in BROM mode by pressing volume down button when connecting the cable. Look at this video. https://www.youtube.com/watch?v=dwo7FF2Z-FA For pattern just hard reset the phone.

07-18-2018, 15:04	#7 (permalink)
javed 12 No Life Poster Join Date: Apr 2013 Location: india Posts: 625 Member: 1911060 Status: Offline Sonork: [email protected] Thanks Meter: 303	this is with firmware solution where are da file dont tell other solution where is inferno tool solution

07-18-2018, 15:11	#8 (permalink)
Bell666 No Life Poster Join Date: Feb 2012 Posts: 762 Member: 1718440 Status: Offline Thanks Meter: 620	You can search for the DA file and then post it here for all of us.

07-18-2018, 18:12	#9 (permalink)
Bell666 No Life Poster Join Date: Feb 2012 Posts: 762 Member: 1718440 Status: Offline Thanks Meter: 620	If you have the secure DA file Inferno can do anything. So it's not an Inferno Tool problem. It's your problem.

07-18-2018, 18:17	#10 (permalink)
kamal_singla Product Supporter Join Date: Jun 2014 Location: India Posts: 5,063 Member: 2211790 Status: Offline Thanks Meter: 5,118	this model no need da Just need emi setting+brom connectivity Which not supported in Inferno..

07-19-2018, 07:16	#12 (permalink)
javed 12 No Life Poster Join Date: Apr 2013 Location: india Posts: 625 Member: 1911060 Status: Offline Sonork: [email protected] Thanks Meter: 303	1. Power Off Phone , Remove battery , Insert back 2. Insert USB cable. In some cases require hold BootKey Wait for phone... Phone found! [ 54 ] Sync... Inital Boot Ok! BB_CPU_PID : 6735 BB_CPU_NME : [MediaTek] MT6735_S00 BB_CPU_EXT : 0xCA00 , 0x8A00 , 0x0000 Processing BROM stage Settings for BROM configured! SecCfgVal : 0x01000000 BromVer : 0x0005 BLVersion : 0x00FE PreLoader : NOT Active [ Erased ] BootLdrSS : SIGNED with SPRELOADER Processing DA stage DA Select done, will use MTK_AllInOne_DA_GRACY_ELEC Sending and initialize DA ... Running DA ver.4.2 on BBID : 0x9B NAND Flash : NOT INSTALLED eMMC Flash : 4400014531303446D8A60136B51B6CD8 Initialize Memory ... DRAM configured from IDB! DRAM initialize passed! DRAM size : 0x80000000 DAgent sent , init HW now eMMC FlashIC initialized [eMMC] : FLASH_VEN : 0x45 , OEM : 0100 [eMMC] : FLASH_INF : [SANDISK] , 6104F [eMMC] : FLASH_CID : 45010044463430313601A6D8D86C64B5 [eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00400000 [eMMC] : FLASH_LEN : 0x00000003AB400000 [eMMC] : FLASH_UCP : 15028 MiB [eMMC 16 GiB] DEV RID : 0x0A2233AFE59530F0A828B4E647DAE2C6 INT RAM : 0x00020000 EXT RAM : 0x80000000 [2 GiB] BOOT TYPE : EMMC_FLASH_BOOT SOC VERIFY : C1 Boot Ok! Clear FRP ( Google Reset Protection ) Clear Ok! Done! Elapsed: 00:00:21 Reconnect Power/Cable! some other team cm*** already done this why inferno not

07-19-2018, 07:54	#13 (permalink)
ka4bygame Freak Poster Join Date: Mar 2018 Posts: 205 Member: 2821424 Status: Offline Thanks Meter: 70	Only because need Da file. If you have Da file . I believe inferno also can done.

07-19-2018, 10:00	#15 (permalink)
javed 12 No Life Poster Join Date: Apr 2013 Location: india Posts: 625 Member: 1911060 Status: Offline Sonork: [email protected] Thanks Meter: 303	tell me how to provide da file for inferno team da file is in the factory firmware or other way to read it