Huawei Ascend Y511-U30 hang on logo and imei repair done with MERAPI King

[ilyaskhan31]

Huawei Ascend Y511-U30 hang on logo
and imei repair done done with MERAPI Tool


















read info log


12:42:13 > Merapi Updated: 2016-01-07
12:42:13 > Connecting...
12:42:16 > Connection successful,connected state!
12:42:16 > Version: V3.8
12:42:57 > Connecting to server...
12:43:04 > Connecting to server...OK!
12:43:04 > Getting function information from server...
12:43:08 > Getting function information from server...OK!
12:43:20 > Access to functional permissions from server...
12:43:24 > Access to functional permissions from server...OK!
12:51:52 > Access to functional permissions from server...
12:51:55 > Access to functional permissions from server...OK!
13:11:45 > Access to functional permissions from server...
13:11:48 > Access to functional permissions from server...OK!
13:11:48 >
13:11:48 >
13:11:48 >
>>Analysis of USB port,Please insert phone USB cable.
13:11:51 > Connecting...
13:11:51 > CPU TYPE:MT6572
13:11:51 > Hardware version:CA01
13:11:51 > Software version:0000
13:11:51 > SecCfgVal :0x00000000
13:11:51 > BromVersion :0xFF
13:11:51 > BLVersion :0x01
>>Boot downloading complete!
13:12:06 > EMMC_ID:0x90014A4834473164048601A4718CB191
13:12:06 > EMMC_PRODUCT_NAME: SAMSUNG :0x483447316404
13:12:06 > EMMC_BOOT1_SIZE: 0x00200000
13:12:06 > EMMC_BOOT2_SIZE: 0x00200000
13:12:06 > EMMC_PRMB_SIZE: 0x00200000
13:12:06 > EMMC_GP1_SIZE: 0x00000000
13:12:06 > EMMC_GP2_SIZE: 0x00000000
13:12:06 > EMMC_GP3_SIZE: 0x00000000
13:12:06 > EMMC_GP4_SIZE: 0x00000000
13:12:06 > EMMC_USER_SIZE: 0x0E7000000(3.61 G)
13:12:06 >
13:12:12 >
13:12:12 >
13:12:12 > Analysis of system files...
13:12:12 > PRELOADER:>>addr:0x000000 --length:0x600000
13:12:12 > MBR:>>addr:0x600000 --length:0x080000
13:12:12 > EBR1:>>addr:0x680000 --length:0x080000
13:12:12 > PRO_INFO:>>addr:0x700000 --length:0x300000
13:12:12 > NVRAM:>>addr:0xA00000 --length:0x500000
13:12:12 > PROTECT_F:>>addr:0xF00000 --length:0xA00000
13:12:12 > PROTECT_S:>>addr:0x1900000 --length:0xA00000
13:12:12 > SECCFG:>>addr:0x2300000 --length:0x020000
13:12:12 > UBOOT:>>addr:0x2320000 --length:0x060000
13:12:12 > BOOTIMG:>>addr:0x2380000 --length:0x600000
13:12:12 > RECOVERY:>>addr:0x2980000 --length:0x600000
13:12:12 > SEC_RO:>>addr:0x2F80000 --length:0x040000
13:12:12 > MISC:>>addr:0x2FC0000 --length:0x080000
13:12:13 > LOGO:>>addr:0x3040000 --length:0x300000
13:12:13 > EXPDB:>>addr:0x3340000 --length:0xA00000
13:12:13 > ANDROID:>>addr:0x3D40000 --length:0x28A00000
13:12:13 > CACHE:>>addr:0x2C740000 --length:0x17800000
13:12:13 > USRDATA:>>addr:0x43F40000 --length:0x52C00000
13:12:13 > FAT:>>addr:0x96B40000 --length:0x511E0000
13:12:13 > BMTPOOL:>>addr:0xFFFF00A8 --length:0x1500000
13:12:13 >
13:12:13 >
13:12:13 > >>Format addr:0x43F40000 --Format length:0x52C00000
13:12:13 > Read phone information success.




Flashing log



Flash files count is :11
Action : Firmware update.
Selected Acer: Liquid Z110
Phone must be off with battery inside.
Please insert USB cable now...
Detected : MediaTek PreLoader USB VCOM Port (COM24)
Phone detected...Please wait
Sending DA agent, please wait...
BBCHIP MT6572_S00
EMMC: (28Gb+4096Mb) HYNIX 0x483447316404
EMMC FW VERSION: 86:00:00:00:00:00:00:00
BOOT STYLE : EMMC BOOT
Detecting high speed port, wait......
If driver not installed, install high speed port driver.
Detected : MediaTek DA USB VCOM Port (COM30)
Starting flash.
Send preloader...
Download firmware to flash now...
MBR checksum is executing ...
EBR1 checksum is executing ...
UBOOT checksum is executing ...
BOOTIMG checksum is executing ...
RECOVERY checksum is executing ...
SEC_RO checksum is executing ...
LOGO checksum is executing ...
ANDROID checksum is executing ...
CACHE checksum is executing ...
USRDATA checksum is executing ...
After flash this firmware need to perform some aditional steps
1.Reinsert battery, keep VOL- and power on untill phone will come in factory mode
2.Select line EMMC, and after press home button.
3.Wait untill phone will restart and will stuck on logo(leave for 1 min in this stage).
4.If phone not power on, reinsert battery and perform direct unlock.
If repair fail, please contact us or report in forum to provide help.
Wait untill phone will start charging.
All done.


Imei Repire log


Available Ports:COM1 COM3
Current Port:COM3

COM port searching and preloader handshake.
Connect port COM24.

COM port searching and preloader handshake.

COM port searching and preloader handshake.
Connect port COM24.

COM port searching and preloader handshake.
Connect successfully.
CPU TYPE:MT6572, E01
DSP Firmware Version:2000.00.00
DSP Patch Version:1.0
Software Version:MOLY.WR8.W1315.MD.WG.MP.V1.P5
Hardware Version:WINGTECH72_WET_JB3_HSPA_HW
Audio Version:Unknown
IMEI1:135790246811220
IMEI2:135790246811220
>>IMEI success.




Download File here http://allsolutiongsm.com/huawei-y51...sted-firmware/

with out password 100% tested file mediafire link

USB_updateSW