I solicit help for Samsung dead i9500s after reading the flash. - GSM-Forum

joselec · 09-07-2014, 04:51

I solicit help with Samsung i9500s spd SC6531, Flash Type 25LG64bWL, the one that was having password and when reading it the flash got dead,I would like to know because the flash read for Volcano it does not work in this mobile, and that I must do, greetings joselec

Internal version: SPRD3
Boot downloading...
Start boot please wait a moment....
Spreadtrum Boot Blo~
CPU TYPE:SC6531 [65310000]
FLASH ID: 00C8006000170000
Flash Type:[GD] 25LG64bWL
Size:0x800000(8MB)
Reading...(0)
The data has been saved in C:\Documents and Settings\osto\Escritorio\MOCOR_12B_6531.W13.07_Rel ease_20140905_190118_FullFlash.bin, size: 8 M.

vkgupta96 · 09-07-2014, 10:01

contact me i will try to solve your problem.............

::bro::
vkgupta96

johnnystrong · 09-07-2014, 17:05

try to post sceen hot. which boot do you use? which type of conection is usb or RX/TX?

ALO SK · 09-07-2014, 17:30

Quote:

Originally Posted by joselec

I solicit help with Samsung i9500s spd SC6531, Flash Type 25LG64bWL, the one that was having password and when reading it the flash got dead,I would like to know because the flash read for Volcano it does not work in this mobile, and that I must do, greetings joselec

Internal version: SPRD3
Boot downloading...
Start boot please wait a moment....
Spreadtrum Boot Blo~
CPU TYPE:SC6531 [65310000]
FLASH ID: 00C8006000170000
Flash Type:[GD] 25LG64bWL
Size:0x800000(8MB)
Reading...(0)
The data has been saved in C:\Documents and Settings\osto\Escritorio\MOCOR_12B_6531.W13.07_Rel ease_20140905_190118_FullFlash.bin, size: 8 M.

first collect same phone
use VolcanoUtility_v2.7.6
set baud rate 1843200
then read flash .
then write the read flash file death phone.

br
alo sk

AniAxn · 09-07-2014, 18:11

Quote:

Originally Posted by joselec

I solicit help with Samsung i9500s spd SC6531, Flash Type 25LG64bWL, the one that was having password and when reading it the flash got dead,I would like to know because the flash read for Volcano it does not work in this mobile, and that I must do, greetings joselec

Internal version: SPRD3
Boot downloading...
Start boot please wait a moment....
Spreadtrum Boot Blo~
CPU TYPE:SC6531 [65310000]
FLASH ID: 00C8006000170000
Flash Type:[GD] 25LG64bWL
Size:0x800000(8MB)
Reading...(0)
The data has been saved in C:\Documents and Settings\osto\Escritorio\MOCOR_12B_6531.W13.07_Rel ease_20140905_190118_FullFlash.bin, size: 8 M.

Which Version You use ..?
Kindly Post Allows Screen Shot ..!!
Use 2.7.2 ..

See This Link - http://forum.gsmhosting.com/vbb/f723...niaxn-1850103/

Wbr,
AniAXN

joselec · 09-07-2014, 19:36

Thanks Sr AniAxn for his amiability in answering, I will execute what You suggests me and I will maintain informed of results.
Details:
-I work the version V2.7.7
-I work with USB Magic cable.
-I attach here Screen Shot Volcano When I write her original flash
Note: I write her flash N9000 spd 6531 volcano 8 MB MOCOR_12B_6531.W13.07_Release_20140825_140856_Full Flash okk.bin, And success that the cell start up but he has difficulties in the execution of the touch-sensitive greetings joselec

joselec · 09-07-2014, 20:27

I completed the indicated steps, and when the Format ended up I connected again the battery and I became 2 minutes pressedly over the power,I do not get that the cell start,may to concede me any one flash for this cell? joselec

09-07-2014, 04:51	#1 (permalink)
joselec Freak Poster Join Date: Sep 2008 Posts: 140 Member: 855805 Status: Offline Thanks Meter: 14	I solicit help for Samsung dead i9500s after reading the flash. I solicit help with Samsung i9500s spd SC6531, Flash Type 25LG64bWL, the one that was having password and when reading it the flash got dead,I would like to know because the flash read for Volcano it does not work in this mobile, and that I must do, greetings joselec Internal version: SPRD3 Boot downloading... Start boot please wait a moment.... Spreadtrum Boot Blo~ CPU TYPE:SC6531 [65310000] FLASH ID: 00C8006000170000 Flash Type:[GD] 25LG64bWL Size:0x800000(8MB) Reading...(0) The data has been saved in C:\Documents and Settings\osto\Escritorio\MOCOR_12B_6531.W13.07_Rel ease_20140905_190118_FullFlash.bin, size: 8 M.

09-07-2014, 19:36	#6 (permalink)
joselec Freak Poster Join Date: Sep 2008 Posts: 140 Member: 855805 Status: Offline Thanks Meter: 14	Thanks Sr AniAxn for his amiability in answering, I will execute what You suggests me and I will maintain informed of results. Details: -I work the version V2.7.7 -I work with USB Magic cable. -I attach here Screen Shot Volcano When I write her original flash Note: I write her flash N9000 spd 6531 volcano 8 MB MOCOR_12B_6531.W13.07_Release_20140825_140856_Full Flash okk.bin, And success that the cell start up but he has difficulties in the execution of the touch-sensitive greetings joselec Last edited by joselec; 09-07-2014 at 19:46.

09-07-2014, 10:01	#2 (permalink)
vkgupta96 Freak Poster Join Date: Nov 2011 Location: ALL INDIA Posts: 298 Member: 1695643 Status: Offline Sonork: 1651587:vk Thanks Meter: 90	contact me i will try to solve your problem............. ::bro:: vkgupta96

09-07-2014, 17:05	#3 (permalink)
johnnystrong Freak Poster Join Date: Oct 2013 Location: Cameroon Posts: 280 Member: 2049808 Status: Offline Thanks Meter: 7	try to post sceen hot. which boot do you use? which type of conection is usb or RX/TX?

09-07-2014, 20:27	#7 (permalink)
joselec Freak Poster Join Date: Sep 2008 Posts: 140 Member: 855805 Status: Offline Thanks Meter: 14	I completed the indicated steps, and when the Format ended up I connected again the battery and I became 2 minutes pressedly over the power,I do not get that the cell start,may to concede me any one flash for this cell? joselec