Karbonn a6 dead when try to format - GSM-Forum

BIGUNLOCKSERVER · 06-29-2013, 06:30

Code:

  Detection initiated...
  Vcc: null
  Gnd: 5
  Analyzing D+ and D-...
  D+ = 3, D- = 2
  Detection D+/D- with 3.50 seconds!
  Analyzing USB device, please wait...
  Found [SPD] USB device: SCI USB2Serial,(VID_1782&PID_4D00)
  Setting...
  Find USB device:SPRD U2S Diag (COM45), (VID_1782&PID_4D00)
  Pinouts setting complete!
    
  Internal version: SPRD3
  Boot downloaded.
  Start boot please wait a moment....
  Spreadtrum Boot Block version 1.1
  Boot downloaded.
  Flash ID: 002C00BC90555600
  FLASH LEN:0x20000000
>>Start analysis mobile data...

PLEASE SOLVE THIS PROBLAM, BUG OR WHAT.

BIGUNLOCKSERVER · 06-29-2013, 06:45

usb not detected after this,solve this problam please

br
bigunlockserver

kkvachhani · 06-29-2013, 06:49

just pres vol + key And detect your pro solve but don't format A6 in volcano set was dead in my hand so do't tray this time wait for bug fix

BIGUNLOCKSERVER · 06-29-2013, 07:23

not detecting in usb with vol up key.

kkvachhani · 06-29-2013, 07:24

vol + and ca101 nokia data cable 100% work if not detect change charging jack

Gsmfull™ · 06-29-2013, 07:26

Quote:

Originally Posted by BIGUNLOCKSERVER

not detecting in usb with vol up key.

not detect by usb because youer phone now is dead
try to scan by usb not usnmode
but this phone dead prblem is not solved by box because untell now read/write not supported

wait soon

BIGUNLOCKSERVER · 06-29-2013, 08:46

Quote:

Originally Posted by kkvachhani

vol + and ca101 nokia data cable 100% work if not detect change charging jack

i try in new phone so charging jack is not damage.

try same process in 2nd same phone.
2nd phone is also dead

BIGUNLOCKSERVER · 06-29-2013, 09:09

Volcano logs after dead

Quote:

available ports:com3
detection initiated...
Vcc: Null
gnd: 5
analyzing d+ and d-...
Failed to detect.
>>pinouts are not fonud!

BIGUNLOCKSERVER · 06-29-2013, 09:40

no help from team for my problam ???

kkvachhani · 06-29-2013, 10:24

bro check my 3# post

redrose2009 · 06-29-2013, 10:44

Quote:

Originally Posted by bigunlockserver

no help from team for my problam ???

contact over

yahoo

or

sonork

BIGUNLOCKSERVER · 06-29-2013, 11:05

Quote:

Originally Posted by kkvachhani

bro check my 3# post

not detecting with vol+ key brother

Umesh_Arora · 06-29-2013, 11:06

use 2.1.6

tick format

select boot 6820 /8810

run

press vol + in mobile till then phone detect

BIGUNLOCKSERVER · 06-29-2013, 11:16

Quote:

Detection initiated...
Vcc: null
Gnd: 20
Analyzing D+ and D-...
User stop
Pinouts are not fonud!
Detection initiated...
Vcc: null
Gnd: 20
Analyzing D+ and D-...
D+ = 22, D- = 23
Detection D+/D- with 1.00 seconds.
Continue to detect BOOT pin...
Found [SPD] USB device: SCI USB2Serial,(VID_1782&PID_4D00)
BOOT(Pull Down) = 21 24
Setting...
Find USB device:SCI USB2Serial (COM114), (VID_1782&PID_4D00)
Pinouts setting complete!

Internal version: SPRD3
Boot downloaded.
Start boot please wait a moment....
Spreadtrum Boot Block version 1.1
Boot downloaded.
Flash ID: 002C00BC
FLASH LEN:0x20000000
Please reduce Baud-rate and try again!
Detection initiated...
Vcc: null
Gnd: 20
Analyzing D+ and D-...
D+ = 22, D- = 23
Detection D+/D- with 0.92 seconds.
Continue to detect BOOT pin...
Found [SPD] USB device: SCI USB2Serial,(VID_1782&PID_4D00)
BOOT(Pull Down) = 21 24
Setting...
Find USB device:SCI USB2Serial (COM114), (VID_1782&PID_4D00)
Pinouts setting complete!

Internal version: SPRD3
Boot downloaded.
Start boot please wait a moment....
Spreadtrum Boot Block version 1.1
Boot downloaded.
Flash ID: 002C00BC
FLASH LEN:0x20000000
>>Set to Factory successfully.

phone is still dead brother

BIGUNLOCKSERVER · 06-29-2013, 16:59

no help from volcano team.

06-29-2013, 06:45	#2 (permalink)
BIGUNLOCKSERVER Freak Poster Join Date: Mar 2011 Location: in BIGSERVER Posts: 390 Member: 1542932 Status: Offline Sonork: 100.1621006 Thanks Meter: 53	usb not detected after this,solve this problam please br bigunlockserver

06-29-2013, 06:49	#3 (permalink)
kkvachhani Freak Poster Join Date: Mar 2007 Posts: 443 Member: 469011 Status: Offline Thanks Meter: 33	just pres vol + key And detect your pro solve but don't format A6 in volcano set was dead in my hand so do't tray this time wait for bug fix

06-29-2013, 07:23	#4 (permalink)
BIGUNLOCKSERVER Freak Poster Join Date: Mar 2011 Location: in BIGSERVER Posts: 390 Member: 1542932 Status: Offline Sonork: 100.1621006 Thanks Meter: 53	not detecting in usb with vol up key.

06-29-2013, 07:24	#5 (permalink)
kkvachhani Freak Poster Join Date: Mar 2007 Posts: 443 Member: 469011 Status: Offline Thanks Meter: 33	vol + and ca101 nokia data cable 100% work if not detect change charging jack

06-29-2013, 09:40	#9 (permalink)
BIGUNLOCKSERVER Freak Poster Join Date: Mar 2011 Location: in BIGSERVER Posts: 390 Member: 1542932 Status: Offline Sonork: 100.1621006 Thanks Meter: 53	no help from team for my problam ???

06-29-2013, 10:24	#10 (permalink)
kkvachhani Freak Poster Join Date: Mar 2007 Posts: 443 Member: 469011 Status: Offline Thanks Meter: 33	bro check my 3# post

06-29-2013, 11:06	#13 (permalink)
Umesh_Arora No Life Poster Join Date: Aug 2012 Location: India Age: 39 Posts: 4,591 Member: 1792140 Status: Offline Sonork: 100.1618782,gaba Thanks Meter: 6,087	use 2.1.6 tick format select boot 6820 /8810 run press vol + in mobile till then phone detect

06-29-2013, 16:59	#15 (permalink)
BIGUNLOCKSERVER Freak Poster Join Date: Mar 2011 Location: in BIGSERVER Posts: 390 Member: 1542932 Status: Offline Sonork: 100.1621006 Thanks Meter: 53	no help from volcano team.