lenovo A630T dead after format - GSM-Forum

zianian · 11-04-2015, 12:42

need help i have back up in volcano but it didnt flash

zoneofash · 11-04-2015, 12:53

Quote:

Originally Posted by zianian

need help i have back up in volcano but it didnt flash

Write Your backup Or Split Your Backup File With Merapi Factory Tool & Flash With It

Always Post Volcano / Merapi Process , Error Screenshot For Get Support From Team .. !! Other Then Your Post Will Be Deleted Without Any Notification

zianian · 11-04-2015, 13:04

20:02:44 > Connecting...
20:02:44 > CPU TYPE:MT6577
20:02:44 > Hardware version:CB00
20:02:44 > Software version:E201
20:02:47 > SecCfgVal :0x00000000
20:02:47 > BromVersion :0x05
20:02:47 > BLVersion :0xFE
>>Boot downloading complete!
20:03:02 > EMMC_ID:0x90014A2058494E594816A1A2CB40A049
20:03:02 > EMMC_PRODUCT_NAME: SAMSUNG :0x2058494E5948
20:03:02 > EMMC_BOOT1_SIZE: 0x00200000
20:03:02 > EMMC_BOOT2_SIZE: 0x00200000
20:03:02 > EMMC_PRMB_SIZE: 0x00200000
20:03:02 > EMMC_GP1_SIZE: 0x00000000
20:03:02 > EMMC_GP2_SIZE: 0x00000000
20:03:02 > EMMC_GP3_SIZE: 0x00000000
20:03:02 > EMMC_GP4_SIZE: 0x00000000
20:03:02 > EMMC_USER_SIZE: 0x0E7000000(3.61 G)
20:03:02 >
20:03:02 > Analysis of USB port...

20:03:18 > Read phone information success.

blacky199 · 11-04-2015, 14:20

log show read info without all partition... but where is format log?

zianian · 11-05-2015, 07:17

lash files count is :14
Action : Firmware update.
Selected Acer: Liquid Z110
Phone must be off with battery inside.
Please insert USB cable now...
Detected : Lenovo USB Port (COM3)
Phone detected...Please wait
Sending DA agent, please wait...
BBCHIP MT6577_S00
EMMC: (28Gb+0Kb) HYNIX 0x2058494e5948
EMMC FW VERSION: 16:00:00:00:00:00:00:00
BOOT STYLE : EMMC BOOT
Detecting high speed port, wait......
If driver not installed, install high speed port driver.
Detected : MediaTek DA USB VCOM Port (COM40)
Starting flash.
Error: S_PART_NO_VALID_TABLE
Warning : S_PART_NO_VALID_TABLE
Error: S_FTHND_FILE_IS_NOT_LOADED_YET
After flash this firmware need to perform some aditional steps
1.Reinsert battery, keep VOL- and power on untill phone will come in factory mode
2.Select line EMMC, and after press home button.
3.Wait untill phone will restart and will stuck on logo(leave for 1 min in this stage).
4.If phone not power on, reinsert battery and perform direct unlock.
If repair fail, please contact us or report in forum to provide help.
Wait untill phone will start charging.
All done.

amn32 · 11-05-2015, 07:21

Quote:

Originally Posted by zianian

lash files count is :14
Action : Firmware update.
Selected Acer: Liquid Z110
Phone must be off with battery inside.
Please insert USB cable now...
Detected : Lenovo USB Port (COM3)
Phone detected...Please wait
Sending DA agent, please wait...
BBCHIP MT6577_S00
EMMC: (28Gb+0Kb) HYNIX 0x2058494e5948
EMMC FW VERSION: 16:00:00:00:00:00:00:00
BOOT STYLE : EMMC BOOT
Detecting high speed port, wait......
If driver not installed, install high speed port driver.
Detected : MediaTek DA USB VCOM Port (COM40)
Starting flash.
Error: S_PART_NO_VALID_TABLE
Warning : S_PART_NO_VALID_TABLE
Error: S_FTHND_FILE_IS_NOT_LOADED_YET
After flash this firmware need to perform some aditional steps
1.Reinsert battery, keep VOL- and power on untill phone will come in factory mode
2.Select line EMMC, and after press home button.
3.Wait untill phone will restart and will stuck on logo(leave for 1 min in this stage).
4.If phone not power on, reinsert battery and perform direct unlock.
If repair fail, please contact us or report in forum to provide help.
Wait untill phone will start charging.
All done.

Hello write only single preloader file and post result ,phone comes on life or not ?

sakabeloha · 01-14-2016, 05:42

i need full backup for A630T.i 've flashing with ROM 4.0.4,flashing done with Merapi but phone always dead!

11-04-2015, 12:42	#1 (permalink)
zianian Freak Poster Join Date: Apr 2007 Location: philippines Posts: 121 Member: 490719 Status: Offline Thanks Meter: 4	lenovo A630T dead after format need help i have back up in volcano but it didnt flash

11-04-2015, 13:04	#3 (permalink)
zianian Freak Poster Join Date: Apr 2007 Location: philippines Posts: 121 Member: 490719 Status: Offline Thanks Meter: 4	20:02:44 > Connecting... 20:02:44 > CPU TYPE:MT6577 20:02:44 > Hardware version:CB00 20:02:44 > Software version:E201 20:02:47 > SecCfgVal :0x00000000 20:02:47 > BromVersion :0x05 20:02:47 > BLVersion :0xFE >>Boot downloading complete! 20:03:02 > EMMC_ID:0x90014A2058494E594816A1A2CB40A049 20:03:02 > EMMC_PRODUCT_NAME: SAMSUNG :0x2058494E5948 20:03:02 > EMMC_BOOT1_SIZE: 0x00200000 20:03:02 > EMMC_BOOT2_SIZE: 0x00200000 20:03:02 > EMMC_PRMB_SIZE: 0x00200000 20:03:02 > EMMC_GP1_SIZE: 0x00000000 20:03:02 > EMMC_GP2_SIZE: 0x00000000 20:03:02 > EMMC_GP3_SIZE: 0x00000000 20:03:02 > EMMC_GP4_SIZE: 0x00000000 20:03:02 > EMMC_USER_SIZE: 0x0E7000000(3.61 G) 20:03:02 > 20:03:02 > Analysis of USB port... 20:03:18 > Read phone information success.

11-04-2015, 14:20	#4 (permalink)
blacky199 No Life Poster Join Date: Sep 2013 Location: India Posts: 2,005 Member: 2030192 Status: Offline Thanks Meter: 1,334	log show read info without all partition... but where is format log?

11-05-2015, 07:17	#5 (permalink)
zianian Freak Poster Join Date: Apr 2007 Location: philippines Posts: 121 Member: 490719 Status: Offline Thanks Meter: 4	lash files count is :14 Action : Firmware update. Selected Acer: Liquid Z110 Phone must be off with battery inside. Please insert USB cable now... Detected : Lenovo USB Port (COM3) Phone detected...Please wait Sending DA agent, please wait... BBCHIP MT6577_S00 EMMC: (28Gb+0Kb) HYNIX 0x2058494e5948 EMMC FW VERSION: 16:00:00:00:00:00:00:00 BOOT STYLE : EMMC BOOT Detecting high speed port, wait...... If driver not installed, install high speed port driver. Detected : MediaTek DA USB VCOM Port (COM40) Starting flash. Error: S_PART_NO_VALID_TABLE Warning : S_PART_NO_VALID_TABLE Error: S_FTHND_FILE_IS_NOT_LOADED_YET After flash this firmware need to perform some aditional steps 1.Reinsert battery, keep VOL- and power on untill phone will come in factory mode 2.Select line EMMC, and after press home button. 3.Wait untill phone will restart and will stuck on logo(leave for 1 min in this stage). 4.If phone not power on, reinsert battery and perform direct unlock. If repair fail, please contact us or report in forum to provide help. Wait untill phone will start charging. All done.

01-14-2016, 05:42	#7 (permalink)
sakabeloha No Life Poster Join Date: Jun 2003 Location: core iXX Age: 48 Posts: 1,596 Member: 32403 Status: Offline Thanks Meter: 139	i need full backup for A630T.i 've flashing with ROM 4.0.4,flashing done with Merapi but phone always dead!