Micromax A72 after wipe date rebuild IMEI success - GSM-Forum

jkniji · 10-15-2013, 12:55

Here is successful story of micromax a72 canvas, when delete wipe data IMEI No removed. then i will doing this proccess i will successfully write IMEI No with volcano Box here is some screenshoot .If this information useful kindly write comments

Uploaded by jkniji

Uploaded by jkniji

MICROMAX A72 IMEI REPAIR DONE

after wipe data set get invalid imei but done with volcano.

Some preparations for operation
1.Insert phone SIM card
2.Power on phone please
3.Turn off flight mode
4.Phone USB mode is enabled
==================================
1.Select the mobile’s USB debugging.
2.Please input 15 bits of IMEI and click button Write IMEI.
3.When software shows Searching port,please power off mobile phone with battery inside and connect to box with cable.
COM port searching and preloader handshake.
Connect port COM11.
COM port searching and preloader handshake.
Write IMEI failed.
COM port searching and preloader handshake.
Connect port COM11.
COM port searching and preloader handshake.
Connect successfully.
CPU TYPE:MT6575
DSP Firmware Version:
DSP Patch Version:
Software Version:MAUI.11AMD.W11.50.SP.V30
Hardware Version:LCSH15CU_HW
Audio Version:Unknown
IMEI1:invalid.
IMEI2:invalid.
IMEI success.
>>Write IMEI done.

write comments if useful..........................jkniji

avtarkaint · 10-15-2013, 13:31

good job bro and hats off for info

::SYED MOBILE:: · 10-15-2013, 13:50

Quote:

Originally Posted by jkniji

Here is successful story of micromax a72 canvas, when delete wipe data IMEI No removed. then i will doing this proccess i will successfully write IMEI No with volcano Box here is some screenshoot .If this information useful kindly write comments

Uploaded by jkniji

Uploaded by jkniji

MICROMAX A72 IMEI REPAIR DONE

after wipe data set get invalid imei but done with volcano.

Some preparations for operation
1.Insert phone SIM card
2.Power on phone please
3.Turn off flight mode
4.Phone USB mode is enabled
==================================
1.Select the mobile’s USB debugging.
2.Please input 15 bits of IMEI and click button Write IMEI.
3.When software shows Searching port,please power off mobile phone with battery inside and connect to box with cable.
COM port searching and preloader handshake.
Connect port COM11.
COM port searching and preloader handshake.
Write IMEI failed.
COM port searching and preloader handshake.
Connect port COM11.
COM port searching and preloader handshake.
Connect successfully.
CPU TYPE:MT6575
DSP Firmware Version:
DSP Patch Version:
Software Version:MAUI.11AMD.W11.50.SP.V30
Hardware Version:LCSH15CU_HW
Audio Version:Unknown
IMEI1:invalid.
IMEI2:invalid.
IMEI success.
>>Write IMEI done.

write comments if useful..........................jkniji

Thanks for feed back always post on success thread http://forum.gsmhosting.com/vbb/f723...hones-1432745/

[email protected] · 04-04-2014, 09:01

Thanks bro am try & imei is done

ajeet barnwal · 07-28-2015, 10:22

Thanks bro i am try it & Write IMEI is done

mickeypopoy · 07-28-2015, 10:36

good job bro and thanks for the info

10-15-2013, 12:55	#1 (permalink)
jkniji Freak Poster Join Date: Dec 2007 Location: Bhilwara(Rajasthan)India Posts: 415 Member: 643992 Status: Offline Sonork: 100.1625367 Thanks Meter: 180	Micromax A72 after wipe date rebuild IMEI success Here is successful story of micromax a72 canvas, when delete wipe data IMEI No removed. then i will doing this proccess i will successfully write IMEI No with volcano Box here is some screenshoot .If this information useful kindly write comments Uploaded by jkniji Uploaded by jkniji Uploaded by jkniji MICROMAX A72 IMEI REPAIR DONE after wipe data set get invalid imei but done with volcano. Some preparations for operation 1.Insert phone SIM card 2.Power on phone please 3.Turn off flight mode 4.Phone USB mode is enabled ================================== 1.Select the mobile’s USB debugging. 2.Please input 15 bits of IMEI and click button Write IMEI. 3.When software shows Searching port,please power off mobile phone with battery inside and connect to box with cable. COM port searching and preloader handshake. Connect port COM11. COM port searching and preloader handshake. Write IMEI failed. COM port searching and preloader handshake. Connect port COM11. COM port searching and preloader handshake. Connect successfully. CPU TYPE:MT6575 DSP Firmware Version: DSP Patch Version: Software Version:MAUI.11AMD.W11.50.SP.V30 Hardware Version:LCSH15CU_HW Audio Version:Unknown IMEI1:invalid. IMEI2:invalid. IMEI success. >>Write IMEI done. write comments if useful..........................jkniji

04-04-2014, 09:01	#4 (permalink)
[email protected] Junior Member Join Date: Nov 2012 Location: am from ludhiana punjab Posts: 30 Member: 1842769 Status: Offline Sonork: pamm00 Thanks Meter: 0	Thanks bro am try & imei is done Last edited by THE CLASH; 02-15-2016 at 17:51.

10-15-2013, 13:31	#2 (permalink)
avtarkaint No Life Poster Join Date: Feb 2007 Location: COOLSAND CPU Posts: 1,844 Member: 452162 Status: Offline Sonork: 100.1592470 Thanks Meter: 440	good job bro and hats off for info

07-28-2015, 10:22	#5 (permalink)
ajeet barnwal Junior Member Join Date: Sep 2013 Posts: 12 Member: 2023266 Status: Offline Thanks Meter: 2	Thanks bro i am try it & Write IMEI is done

07-28-2015, 10:36	#6 (permalink)
mickeypopoy Insane Poster Join Date: Dec 2008 Posts: 72 Member: 921124 Status: Offline Thanks Meter: 8	good job bro and thanks for the info