GSM-Forum - Micromax A72 Pattern lock

GSM-Forum (https://forum.gsmhosting.com/vbb/)

- Volcano Box (https://forum.gsmhosting.com/vbb/f723/)

- - Micromax A72 Pattern lock (https://forum.gsmhosting.com/vbb/f723/micromax-a72-pattern-lock-1662549/)

Micromax A72 Pattern lock

Micromax A72 Pattern lock

How to Remove lock via volcone without flashing?

ThankQ

Detection initiated...
Vcc: null
Gnd: 5
Analyzing D+ and D-...
D+ = 3, D- = 2
Detection D+/D- with 4.20 seconds!
Analyzing USB device, please wait...
New USB device: (VID_0E8D&PID_0003)
Setting...
Find USB device:MTK USB Port (COM31), (VID_0E8D&PID_0003)
Pinouts setting complete!

Exception! Please try again!
Failure! Please try again!
Ready to read/write again, please remove the power supply clip or battery and then re-loaded it

Quote:

Originally Posted by msmobile (Post 9446971)

try to hard reset bro search in forum

and here is flash file

Welcome to the ./downloads/Micromax/A72/ folder of the support area for your service center

I think not possible brother

but file&tool available in forum

i flashed 3 sets

ok goodluck

which tool use bro flashing time

hi friend which tool use tell me and tell how to fls my e id ''''''''''''''''''''' [email protected]

this phone is fully supported with volcano box just format your phone by usb cable

A 72 pattern lock done by volcano
Format addr:0x176A0000 --Format length:0x7960000
Read phone information success.
Analysis of USB port,Please insert phone USB cable.
Connecting...
CPU TYPE:6575
Hardware version:CB00
Software version:E201
Boot downloading complete!
Flash ID: 00EC00BC
Flash Type: NAND_K9K4G16Q0M
Chip Capacity: 0x20000000(512MB)
Format range: Start Address: 0x000000,Format Length :0x000000
Flash erasing complete!
Please select a format length.
Analysis of USB port,Please insert phone USB cable.
Connecting...
CPU TYPE:6575
Hardware version:CB00
Software version:E201
Boot downloading complete!
Flash ID: 00EC00BC
Flash Type: NAND_K9K4G16Q0M
Chip Capacity: 0x20000000(512MB)
Format range: Start Address: 0x176A0000,Format Length :0x7960000
>>Flash erasing complete!

just follow

tutorials

http://forum.gsmhosting.com/vbb/f723...droid-1627156/

micromax a72 pattern lock.after flash dead.plese help me any one

micromax a72 pattern lock.after flash dead.plese help me any one.

plese urjent.

[QUOTE=msmobile;9446957]Micromax A72 Pattern lock

How to Remove lock via volcone without flashing?

Try this press volume up connect usb , baud rate 460800.

how to unlock micromax a72 pattern lock

Analysis of USB port,Please insert phone USB cable.
Connecting...
CPU TYPE:6575
Hardware version:CB00
Software version:E201
Boot downloading complete!
Flash ID: 00AD00BC
Flash Type: NAND_H8BCS0UN0MCR
Chip Capacity: 0x20000000(512MB)

Analysis of system files...
PRELOADER addr:0x000000 --length:0x040000
DSP_BL addr:0x040000 --length:0x0C0000
__NODL_NVRAM addr:0x100000 --length:0x300000
__NODL_SECCFG addr:0x400000 --length:0x020000
UBOOT addr:0x420000 --length:0x060000
BOOTIMG addr:0x480000 --length:0x500000
RECOVERY addr:0x980000 --length:0x500000
SEC_RO addr:0xE80000 --length:0x120000
__NODL_MISC addr:0xFA0000 --length:0x060000
LOGO addr:0x1000000 --length:0x300000
__NODL_EXPDB addr:0x1300000 --length:0x0A0000
ANDROID addr:0x13A0000 --length:0x12700000
__NODL_CACHE addr:0x13AA0000 --length:0x3C00000
USRDATA addr:0x176A0000 --length:0x7F20000
__NODL_BMTPOOL addr:0xFFFF0050 --length:0x000000

Format addr:0x176A0000 --Format length:0x7960000
Read phone information success.
Waiting for phone's response,please press Power on/off button

Waiting for phone's response,please press Power on/off button.
Analysis of USB port,Please insert phone USB cable.
Connecting...
CPU TYPE:6575
Hardware version:CB00
Software version:E201
Boot downloading complete!
Flash ID: 00AD00BC
Flash Type: NAND_H8BCS0UN0MCR
Chip Capacity: 0x20000000(512MB)

Analysis of system files...
PRELOADER addr:0x000000 --length:0x040000
DSP_BL addr:0x040000 --length:0x0C0000
__NODL_NVRAM addr:0x100000 --length:0x300000
__NODL_SECCFG addr:0x400000 --length:0x020000
UBOOT addr:0x420000 --length:0x060000
BOOTIMG addr:0x480000 --length:0x500000
RECOVERY addr:0x980000 --length:0x500000
SEC_RO addr:0xE80000 --length:0x120000
__NODL_MISC addr:0xFA0000 --length:0x060000
LOGO addr:0x1000000 --length:0x300000
__NODL_EXPDB addr:0x1300000 --length:0x0A0000
ANDROID addr:0x13A0000 --length:0x12700000
__NODL_CACHE addr:0x13AA0000 --length:0x3C00000
USRDATA addr:0x176A0000 --length:0x7F20000
__NODL_BMTPOOL addr:0xFFFF0050 --length:0x000000

Format addr:0x176A0000 --Format length:0x7960000
Read phone information success.
Format range: Start Address: 0x176A0000,Format Length :0x7960000
>>Flash erasing complete!