MSTAR IMEI write Error

[khaled_wf7]

[Moiz Khan]

Step 1 : Write Both IMEI in IMEI space in MSTAR tab of Volcano Tool
Step 2 : Take Out Handset
Step 3 : Insert Sim Card
Step 4 : Insert Battery & Switch it ON
Step 5 : Now Insert USB Cable in it.

Mobile will give 2-3 options

Step 6 : Select "Modem" option and install Mstar Modem Drivers on PC
Step 7 : Remove tick from "Auto-Detect pinout"
Step 8 : Tick "Write Imei" and press "RUN"


In some special cases, your mobile would not show such a pop-up menu.
Then You can do in the following way:

Step A : Plug out USB cable firstly
Step B : Input this code in mobile (*#*#1705#) and press “call” key,

then you would enter into an engineer menu

Step C : Select “Emmi Debug/Disable USB Menu”

After complete this, connect your mobile with PC with USB cable,
then you can find that PC would detect the USB port and
It will show it as a modem in the device manager....

Now do as given from STEP 1.


Thats it . .


bR. Smk

[khaled_wf7]

all steps done OK and after reboot and read Imei , Imei steel same
Imei Doesn't change

[sweet4hamza]

try with old version of volcano or any other tool
if done then let me know

[MUKESH RAJ]

How to Repair IMEI

1. Power on Phone
2. Plug In USB Select PC Syne Mode
3. Put IMEI
4. Write

BR,

MUKESH RAJ

[khaled_wf7]

tried with 2.6.0 its same