my phone TW29 duo tv imei write flash problem help: - GSM-Forum

lorenzo roberto · 10-10-2012, 06:53

hello volcano team and end users...

my phone tw29 MTK 6236 cant write imei with volcano box after format shows invalid imei..

i tried those method from this forum but no success.. i decided to write original back up which taken by volcano box software stop at baud adjust complete nothing has been written.

Code:

  Volcano Updated: 2012-10-06
  Connecting...
  Connection successful,connected state!
  Version: V3.8
  SN:115-915-725
  Port:COM4
  Available Ports:COM1 COM4 
  Detection initiated, connect the phone and power on it...
  Vcc: null
  Gnd: 7
  RX: 4, TX: 5
  
  Connecting...
  Hardware version:8A03
  Software version:8A00
  CPU TYPE:6236
  Internal version:0000
  Boot downloading complete!
  Flash ID: 00AD00B1
  Flash Type: NAND_HYD0SQG0MF1P          
  Chip Capacity: 0x8000000(128MB)
  Mobile phone software version for:F9030B_TW29TV_DUO_20120620_V9
  Baud adjust...complete.
  Detection initiated, connect the phone and power on it...
  Vcc: null
  Gnd: 7
  RX: 4, TX: 5
  
  Connecting...
  Hardware version:8A03
  Software version:8A00
  CPU TYPE:6236
  Internal version:0000
  Boot downloading complete!
  Flash ID: 00AD00B1
  Flash Type: NAND_HYD0SQG0MF1P          
  Chip Capacity: 0x8000000(128MB)
  Mobile phone software version for:F9030B_TW29TV_DUO_20120620_V9
  Baud adjust...complete.
  Detection initiated, connect the phone and power on it...
  Vcc: null
  Gnd: 7
  RX: 4, TX: 5
  
  Connecting...
  Hardware version:8A03
  Software version:8A00
  CPU TYPE:6236
  Internal version:0000
  Boot downloading complete!
  Flash ID: 00AD00B1
  Flash Type: NAND_HYD0SQG0MF1P          
  Chip Capacity: 0x8000000(128MB)
  Detection initiated, connect the phone and power on it...
  Vcc: null
  Gnd: 5
  RX: 3, TX: 2
  
  Connecting...
  Hardware version:8A03
  Software version:8A00
  CPU TYPE:6236
  Internal version:0000
  Boot downloading complete!
  Flash ID: 00AD00B1
  Flash Type: NAND_HYD0SQG0MF1P          
  Chip Capacity: 0x8000000(128MB)
  Mobile phone software version for:F9030B_TW29TV_DUO_20120620_V9
  Baud adjust...complete.
  Detection initiated, connect the phone and power on it...
  Vcc: null
  Gnd: 5
  RX: 3, TX: 2
  
  Connecting...
  Hardware version:8A03
  Software version:8A00
  CPU TYPE:6236
  Internal version:0000
  Boot downloading complete!
  Detection initiated, connect the phone and power on it...
  Vcc: null
  Gnd: 5
  RX: 3, TX: 2
  
  Connecting...
  Hardware version:8A03
  Software version:8A00
  CPU TYPE:6236
  Internal version:0000
  Boot downloading complete!
  Flash ID: 00AD00B1
  Flash Type: NAND_HYD0SQG0MF1P          
  Chip Capacity: 0x8000000(128MB)
  Mobile phone software version for:F9030B_TW29TV_DUO_20120620_V9
  Baud adjust...complete.
  Read phone information success.
  Detection initiated, connect the phone and power on it...
  Vcc: null
  Gnd: 5
  RX: 3, TX: 2
  
  Connecting...
  Hardware version:8A03
  Software version:8A00
  CPU TYPE:6236
  Internal version:0000
  Boot downloading complete!
  Flash ID: 00AD00B1
  Flash Type: NAND_HYD0SQG0MF1P          
  Chip Capacity: 0x8000000(128MB)
  Mobile phone software version for:F9030B_TW29TV_DUO_20120620_V9
  Baud adjust...complete.
  Flash reading...3%
  Detection initiated, connect the phone and power on it...
  Vcc: null
  Gnd: 5
  RX: 3, TX: 2
  
  Connecting...
  Hardware version:8A03
  Software version:8A00
  CPU TYPE:6236
  Internal version:0000
  Boot downloading complete!
  Flash ID: 00AD00B1
  Flash Type: NAND_HYD0SQG0MF1P          
  Chip Capacity: 0x8000000(128MB)
  Mobile phone software version for:F9030B_TW29TV_DUO_20120620_V9
  Baud adjust...complete.

stop here..

Qaisar Mahmood · 10-10-2012, 07:10

@ lorenzo roberto

do with this method

http://forum.gsmhosting.com/vbb/8623221-post3.html

BR
Qaisar Mahmood

Umesh_Arora · 10-10-2012, 07:46

How to Imei Change MTK by at mode in usb
Imei Change with AT Mode.
1: Power on Mobile With Battery.
2: insert usb cable
3: select Com
4: install MTK USB driver.
5: open volcano exe and selet MTK USB Port
6: Untick Auto Detect Pinouts
7: tick write imei
8: click run
9: fill imei tab
10:Select Com Port in imei tab
11:Click write imei

10-10-2012, 07:10	#2 (permalink)
Qaisar Mahmood No Life Poster Join Date: Jan 2006 Location: Pakistan Posts: 15,094 Member: 226457 Status: Offline Sonork: No more used Thanks Meter: 14,934	@ lorenzo roberto do with this method http://forum.gsmhosting.com/vbb/8623221-post3.html BR Qaisar Mahmood

10-10-2012, 07:46	#3 (permalink)
Umesh_Arora No Life Poster Join Date: Aug 2012 Location: India Age: 39 Posts: 4,591 Member: 1792140 Status: Offline Sonork: 100.1618782,gaba Thanks Meter: 6,087	How to Imei Change MTK by at mode in usb Imei Change with AT Mode. 1: Power on Mobile With Battery. 2: insert usb cable 3: select Com 4: install MTK USB driver. 5: open volcano exe and selet MTK USB Port 6: Untick Auto Detect Pinouts 7: tick write imei 8: click run 9: fill imei tab 10:Select Com Port in imei tab 11:Click write imei