Freak Poster
Join Date: Nov 2011 Location: B A N G L A D E S H Age: 31
Posts: 170
Member: 1686868
Status: Offline
Sonork: 100.1625990 Thanks Meter: 85 | need help in argent winstar w10 color white. I have a phone winstar w10 color white it was locked by user. when I formate properly on volcano it restart only. when I write pac file it is dead by me. please tell me how to recover it.
volcano box log Quote:
Pinouts are not fonud!
Detection initiated...
Vcc: null
Gnd: null
Analyzing D+ and D-...
User stop
Pinouts are not fonud!
Waiting for phone's response, press the Power on the phone
please detect pinouts and defined pinouts first.
Partition as follows. It isn't supported to format and ROOT the mobile phone.
Unable to connect to the device, check whether the device is properly connected.
Partition as follows. It isn't supported to format and ROOT the mobile phone.
Unable to connect to the device, check whether the device is properly connected.
Waiting for phone's response, press the Power on the phone..
Detection initiated...
Vcc: null
Gnd: 5
Analyzing D+ and D-...
D+ = 3, D- = 2
Analyzing USB device, please wait...
Find USB device:SCI USB2Serial (COM18), (VID_1782&PID_4D00)
Internal version: SPRD3
Boot downloaded.
Start boot please wait a moment....
Spreadtrum Boot Block version 1.1
Boot downloaded.
CPU TYPE:SC8810/6820 [88100001]
Flash ID: 002C00BC90555600
Flash Type:[Micron] MT29C4G48MAZAPAKD
FLASH LEN:0x20000000
mtdparts=sprd-nand:256k(spl),512k(2ndbl),256k(params),512k(vmjal una),10m(modem),3840k(fixnv),3840k(backupfixnv),51 20k(dsp),3840k(runtimenv),10m(boot),10m(recovery), 230m(system),150m(userdata),60m(cache),256k(misc), 1m(boot_logo),1m(fastboot_logo),3840k(productinfo) ,512k(kpanic),512k(simlock),10m(intmemory)
Analysis flash internal data successfully.
Detection initiated...
Vcc: null
Gnd: 5
Analyzing D+ and D-...
D+ = 3, D- = 2
Analyzing USB device, please wait...
Find USB device:SCI USB2Serial (COM18), (VID_1782&PID_4D00)
Internal version: SPRD3
Boot downloaded.
Start boot please wait a moment....
Spreadtrum Boot Block version 1.1
Boot downloaded.
Boot downloaded.
Flash ID: 002C00BC9055
Flash Type:[Micron] MT29C4G48MAZAPAKD
FLASH LEN:0x20000000
Set to Factory successfully.
Detection initiated...
Vcc: null
Gnd: 5
Analyzing D+ and D-...
D+ = 3, D- = 2
Detection D+/D- with 3.53 seconds!
Analyzing USB device, please wait...
User stop
Pinouts are not fonud!
Detection initiated...
Vcc: null
Gnd: 5
Analyzing D+ and D-...
D+ = 3, D- = 2
Analyzing USB device, please wait...
Find USB device:SCI USB2Serial (COM18), (VID_1782&PID_4D00)
Internal version: SPRD3
Boot downloaded.
Start boot please wait a moment....
Spreadtrum Boot Block version 1.1
Boot downloaded.
CPU TYPE:SC8810/6820 [88100001]
Flash ID: 002C00BC90555600
Flash Type:[Micron] MT29C4G48MAZAPAKD
FLASH LEN:0x20000000
mtdparts=sprd-nand:256k(spl),512k(2ndbl),256k(params),512k(vmjal una),10m(modem),3840k(fixnv),3840k(backupfixnv),51 20k(dsp),3840k(runtimenv),10m(boot),10m(recovery), 230m(system),150m(userdata),60m(cache),256k(misc), 1m(boot_logo),1m(fastboot_logo),3840k(productinfo) ,512k(kpanic),512k(simlock),10m(intmemory)
Analysis flash internal data successfully.
Detection initiated...
| pac downloded by. http://forum.gsmhosting.com/vbb/f723...luded-1795410/ http://forum.gsmhosting.com/vbb/10211725-post415.html |