need help k touch a11 - GSM-Forum

babbu kumar · 05-03-2014, 17:14

need help k touch a11 after formet set dead i will find flash file but cannot write Dear supporters k-touch A11 pattern lock mtk6575 dead while reading info.
I am unable to flash it with volcano it stuck at "NFB bootloader downloading...".

I tried with different volcano versions.
different speeds
different android 65xx boot
also with auto detecting pinouts but no success.
during hang at "NFB bootloader downloading.." COM port changes from "mtk usb port" to "MediaTek DA USB VCOM Port

sweet4hamza · 05-03-2014, 19:07

please post screenshot for more better help
and did you try on all android boots
or
try with scatter fie

babbu kumar · 05-04-2014, 05:27

Connection successful,connected state!
Version: V3.8
SN:070-647-234
Port:COM3
After format or Flash you have to press & hold power button for at least 1.30 mins.
Note for win7 users :
Start your Win 7 64bit with F8 key and choose 'Disable Driver Signature Enforcement'.
After that the spd drivers will have the ability to be loaded.
Available Ports:COM1 COM3 COM30 COM31

Analysis of USB port,Please insert phone USB cable.
Connecting...
CPU TYPE:6575
Hardware version:CB00
Software version:E201
Boot downloading complete!
FlashID:002C00BC00900055
Flash Type: NAND_MT29C4G48MAZAPAKD
FlashLen:20000000

NFB bootloader downloading...
NFB bootloader downloading. then stop

babbu kumar · 05-04-2014, 05:29

Quote:

Originally Posted by sweet4hamza

please post screenshot for more better help
and did you try on all android boots
or
try with scatter fie

how to use scatter file in volcano

rizwankhan8670 · 05-04-2014, 07:34

Quote:

Originally Posted by babbu kumar

how to use scatter file in volcano

http://forum.gsmhosting.com/vbb/f723...o-box-1800714/

babbu kumar · 05-04-2014, 10:16

Quote:

Originally Posted by rizwankhan8670

http://forum.gsmhosting.com/vbb/f723...o-box-1800714/

Software version:E201
Boot downloading complete!
FlashID:002C00BC00900055
Flash Type: NAND_MT29C4G48MAZAPAKD
FlashLen:20000000

Analysis of USB port...

Analysis of USB port,Please insert phone USB cable.
Connecting...
CPU TYPE:6575
Hardware version:CB00
Software version:E201
Boot downloading complete!
FlashID:002C00BC00900055
Flash Type: NAND_MT29C4G48MAZAPAKD
FlashLen:20000000

>>Analysis of USB than stop

babbu kumar · 05-04-2014, 10:18

Quote:

Originally Posted by sweet4hamza

please post screenshot for more better help
and did you try on all android boots
or
try with scatter fie

I installed all drivers for MTk.I tried on Win xp and 7 but always same error after boot download at NFB bootloader downloading.com port changes ( ex from com 16 to com 17).I attached phone with box pinfind cable and also tried with normal USB cable and boot cable some thing is wrong

iP-UNLOC-STORE · 05-04-2014, 10:41

helping you tested file

manpreetmani · 10-12-2014, 17:15

05-03-2014, 17:14	#1 (permalink)
babbu kumar Freak Poster Join Date: Feb 2009 Location: india Posts: 127 Member: 983083 Status: Offline Thanks Meter: 13	need help k touch a11 need help k touch a11 after formet set dead i will find flash file but cannot write Dear supporters k-touch A11 pattern lock mtk6575 dead while reading info. I am unable to flash it with volcano it stuck at "NFB bootloader downloading...". I tried with different volcano versions. different speeds different android 65xx boot also with auto detecting pinouts but no success. during hang at "NFB bootloader downloading.." COM port changes from "mtk usb port" to "MediaTek DA USB VCOM Port

10-12-2014, 17:15	#9 (permalink)
manpreetmani Freak Poster Join Date: May 2013 Location: india punjab Posts: 412 Member: 1930279 Status: Offline Sonork: 100.1663273 Thanks Meter: 113	need help k touch a11+ Last edited by manpreetmani; 10-12-2014 at 17:24.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

05-03-2014, 19:07	#2 (permalink)
sweet4hamza No Life Poster Join Date: Nov 2010 Location: Atif mobile,goal, faisalabad Posts: 12,041 Member: 1434736 Status: Offline Sonork: 100.1607275 Thanks Meter: 5,377	please post screenshot for more better help and did you try on all android boots or try with scatter fie

05-04-2014, 05:27	#3 (permalink)
babbu kumar Freak Poster Join Date: Feb 2009 Location: india Posts: 127 Member: 983083 Status: Offline Thanks Meter: 13	Connection successful,connected state! Version: V3.8 SN:070-647-234 Port:COM3 After format or Flash you have to press & hold power button for at least 1.30 mins. Note for win7 users : Start your Win 7 64bit with F8 key and choose 'Disable Driver Signature Enforcement'. After that the spd drivers will have the ability to be loaded. Available Ports:COM1 COM3 COM30 COM31 Analysis of USB port,Please insert phone USB cable. Connecting... CPU TYPE:6575 Hardware version:CB00 Software version:E201 Boot downloading complete! FlashID:002C00BC00900055 Flash Type: NAND_MT29C4G48MAZAPAKD FlashLen:20000000 NFB bootloader downloading... NFB bootloader downloading. then stop

05-04-2014, 10:41	#8 (permalink)
iP-UNLOC-STORE Product Supporter Join Date: Sep 2011 Location: India/uk Age: 31 Posts: 117 Member: 1660882 Status: Offline Thanks Meter: 20	helping you tested file