With new update 2.8.3 - SC6531 phone death after read code

[nishue]

Internal version: SPRD3
Boot downloaded.
Start boot please wait a moment....
Please change Boot or reduce Baudrate, try it again.
Ready to read/write again, please remove the power supply clip or battery and then re-loaded it.
Detection initiated...
Vcc: null
Gnd: 2 4
Analyzing D+ and D-...
D+ = 6, D- = 8
Analyzing USB device, please wait...
Find USB device:SCI USB2Serial (COM39), (VID_1782&PID_4D00)


Internal version: SPRD3
Boot downloaded.
Start boot please wait a moment....
Spreadtrum Boot Block version 1.2
CPU TYPE:SC6531 [65310000]
FLASH ID: 00C8004000160000
Flash Type:[GD] GD25Q32
Size:0x400000(4MB)
Reading...(0)
New flash structure, please use the 460800 rate,try again.
Ready to read/write again, please remove the power supply clip or battery and then re-loaded it.
Detection initiated...
Vcc: null
Gnd: 2 4
Analyzing D+ and D-...
D+ = 6, D- = 8
Analyzing USB device, please wait...
Find USB device:SCI USB2Serial (COM39), (VID_1782&PID_4D00)


Internal version: SPRD3
Boot downloaded.
Start boot please wait a moment....
Spreadtrum Boot Blo~
CPU TYPE:SC6531 [65310000]
FLASH ID: 00C8004000160000
Flash Type:[GD] GD25Q32
Size:0x400000(4MB)
the phone has dual-flash ic,it reads flash size actually8(M)
Reading completed.
The data has been saved in D:\Volcano\Flash File\Reded\Zigo\T881 (SPD 6531)\MOCOR_12B_6531.W13.11_Release_20141003_14315 7_FullFlash.bin, size: 8 M.
Software has two ways to find password, it may have different results to click button again.
Failes to open the file!
Screen Lock input order:
¢Ù ¢Ú ¢Û
¢Ü ¢Ý ¢Þ
¢ß ¢à ¢á

Software has two ways to find password, it may have different results to click button again.
Looking for passwords,please wait...
[Phone Lock] 121553
[Phone Lock] 1234
>>Looking for passwords complete.

Now my phone no power On !

then i try to flash back,

Internal version: SPRD3
Boot downloaded.
Start boot please wait a moment....
Spreadtrum Boot Blo~
CPU TYPE:SC6531 [65310000]
FLASH ID: 00C8004000160000
Flash Type:[GD] GD25Q32
Size:0x400000(4MB)
Writing completed.
Flash file D:\Volcano\Flash File\Reded\Zigo\T881 (SPD 6531)\MOCOR_12B_6531.W13.11_Release_20141003_14315 7_FullFlash.bin has been written.

But No luck.

then i try to formet

Detection initiated...
Vcc: null
Gnd: 21 23
Analyzing D+ and D-...
D+ = 19, D- = 17
Analyzing USB device, please wait...
Find USB device:SCI USB2Serial (COM39), (VID_1782&PID_4D00)

Internal version: SPRD3
Boot downloaded.
Start boot please wait a moment....
Spreadtrum Boot Blo~
CPU TYPE:SC6531 [65310000]
FLASH ID: 00C8004000160000
Flash Type:[GD] GD25Q32
Size:0x400000(4MB)
>>Set to Factory successfully.

But no luck !

Phone no power on !
what can i do now ?

BR,
nishue.

[avtarkaint]

wait for support until they reply or try other box.

[laxmi kamlesh]

@nishue

the phone has dual-flash ic,it reads flash size actually8(M)

when you read flash file then its show dual-flash ic ?

and

Size:0x400000(4MB)
Writing completed.

when you write or format its doen't show dual-flash ??

[nishue]

@laxmi kamlesh
i think i got your point, then i set menualy flash file zise to 8mb then try, but no luck

1st i try formet (8MB selected), no luck,

Volcano Updated: 2014-09-28
Connecting...
Connection successful,connected state!
Version: V3.8
SN:176-303-712
Port:COM4
After format or Flash you have to press & hold power button for at least 1.30 mins.
Note for win7 users :
Start your Win 7 64bit with F8 key and choose 'Disable Driver Signature Enforcement'.
After that the spd drivers will have the ability to be loaded.
Available Ports:COM1 COM3 COM4
Current Port:COM4
Available Ports:COM1 COM3 COM4
Detection initiated...
Vcc: null
Gnd: 2 4
Analyzing D+ and D-...
D+ = 6, D- = 8
Analyzing USB device, please wait...
Find USB device:SCI USB2Serial (COM39), (VID_1782&PID_4D00)

Internal version: SPRD3
Boot downloaded.
Start boot please wait a moment....
Spreadtrum Boot Blo~
CPU TYPE:SC6531 [65310000]
FLASH ID: 00C8004000160000
Flash Type:[GD] GD25Q32
Size:0x400000(4MB)
Set to Factory successfully.

2nd i try flash from my old bakup (8MB selected), no luck

Detection initiated...
Vcc: null
Gnd: 2 4
Analyzing D+ and D-...
D+ = 6, D- = 8
Analyzing USB device, please wait...
Find USB device:SCI USB2Serial (COM39), (VID_1782&PID_4D00)


Internal version: SPRD3
Boot downloaded.
Start boot please wait a moment....
Spreadtrum Boot Blo~
CPU TYPE:SC6531 [65310000]
FLASH ID: 00C8004000160000
Flash Type:[GD] GD25Q32
Size:0x800000(8MB)
Writing completed.
Flash file D:\Volcano\Flash File\Reded\Zigo\T881 (SPD 6531)\MOCOR_12B_6531.W13.11_Release_20141003_14315 7_FullFlash.bin has been written.

3rd i try formet agen (8MB selected), no luck,

Detection initiated...
Vcc: null
Gnd: 2 4
Analyzing D+ and D-...
D+ = 6, D- = 8
Analyzing USB device, please wait...
Find USB device:SCI USB2Serial (COM39), (VID_1782&PID_4D00)

Internal version: SPRD3
Boot downloaded.
Start boot please wait a moment....
Spreadtrum Boot Blo~
CPU TYPE:SC6531 [65310000]
FLASH ID: 00C8004000160000
Flash Type:[GD] GD25Q32
Size:0x400000(4MB)
>>Set to Factory successfully.

my phone istill no powre on ! any help ?

[nishue]

Originally Posted by laxmi kamlesh

@nishue



when you read flash file then its show dual-flash ic ?

and



when you write or format its doen't show dual-flash ??

Yes only is show dual-flash ic in read time only, format & flash its doen't show dual-flash.

[joselec]

Friend feel it his phone will get dead, volcano's team does not have solution, see this here

[nishue]

Originally Posted by joselec

Friend feel it his phone will get dead, volcano's team does not have solution, see this here

My dear friend,
I can't agree with you. I can't blemish my box
reason is,
I make many money with my box from repair in phone ! i love & respect my volcano box for it !

Yes i know one or two phone get dead, but how many get it live ?

So we look forward, to help from supporter !
(my phone still death Help us !)

Br,
nishue.

[laxmi kamlesh]

Hi brother

can you arrange same working mobile..?

[nishue]

Originally Posted by laxmi kamlesh

Hi brother

can you arrange same working mobile..?

Its too risk ! if i read it, it goen Death !
then i have to pay two phone

[laxmi kamlesh]

No risk...

arrange same mobile and tell us

if dead i will pay you.

[nishue]

Ok i have one ! tell me next ?

[nishue]

but pls can we do it nex monday ?
i have close my shop now !

Sorry
Br,
nishue

[nishue]

Originally Posted by laxmi kamlesh

No risk...

arrange same mobile and tell us

if dead i will pay you.

Sir,
now i have same model brandnew working phone.
pls can u help me ?
BR,
nishue.

[vkgupta96]

Originally Posted by nishue

Sir,
now i have same model brandnew working phone.
pls can u help me ?
BR,
nishue.

contact me bro...........

[nishue]

Sir,
to day is last day my customer give to me.
then,
today i have to repair Or pay money for this phone.

I trust Volcano teem, help me about that