Post Here ALL Successful Repaired Phone By Volcano/Inferno [SUCCESS REPORTS BY USERS]

[mr.luckytarun]

Oppo A57 Pattern Remove Done With Format

[bright hlatini]

GTEL A7101 FRP UNLOCK DONE

>>Current Task:
Clear FRP 2(EMMC)
>>Ver:1.4.5
>>
>>HIGH BOOT
>>
>>Operation:
1. Power off the phone.
2. Please insert USB cable within 40 seconds.
>>
>>MediaTek PreLoader USB VCOM (Android) (COM30)
>>
>>Connecting...
>>CPU TYPE:MT6580
>>Hardware version:CA00
>>Software version:0000
>>SecCfgVal :0x00000000
>>BromVersion :0xFF
>>BLVersion :0x01
>>Boot downloading complete!
>>EMMC_ID:0x150100513832334D420005CADC70C2E1
>>EMMC_PRODUCT_NAME: 0x513832334D42
>>EMMC_BOOT1_SIZE: 0x00400000
>>EMMC_BOOT2_SIZE: 0x00400000
>>EMMC_PRMB_SIZE: 0x00400000
>>EMMC_GP1_SIZE: 0x00000000
>>EMMC_GP2_SIZE: 0x00000000
>>EMMC_GP3_SIZE: 0x00000000
>>EMMC_GP4_SIZE: 0x00000000
>>EMMC_USER_SIZE: 0x3A3E00000(14.56 G)
>>
>>INT RAM: 128KB SDRAM EXT RAM: 2GB DRAM
>>Find partition success.
>>Clear FRP successfully!

[mr.luckytarun]

Lava Iris 60 7.0 Frp Remove Done With Inferno

[mr.luckytarun]

Micromax Q352 Write Firmware And Frp Remove Done

[Damosco]

Wiko rainbow 4G lite FRP done with unitool

>>Current Task: Lenovo>>Qualcomm>>Clear FRP>>AUTO
>>Operation:
1.Remove battery and insert battery back.
2.Press and hold 'VolumeUp' and 'VolumeDown' keys.
3.Please insert USB cable within 50 seconds.
Some phones need to use edl cable or special card slot.
>>Port Found[COM66].
>>Hardware Id:009600e1
>>Loading Necessary File,Please Wait...
>>Done.
>>Waiting for flash programmer to boot.
>>Loading Build Info,Please Wait...
>>Name: L5221
>>Brand: WIKO
>>Device: L5221
>>Release Version 5.1.1
>>BaseBand CPU: L5221
>>Project Version: LMY47V release-keys
>>Ext Info: RAINBOW LITE 4G
>>Size: 8Gb
>>Done.
>>Clearing FRP lock...
>>Clear FRP lock success

[jaggaamrit]

>>Current Task: VIVO>>MediaTek>>Write Factory Files
>>BasicInfo :
>>Brand : vivo
>>ProdName : 1601
>>ProdModel : vivo 1601
>>Device : 1601
>>AndroidVer: 6.0
>>MTK CPU : MT6755
>>MTK PRJ : alps-mp-m0.mp7-V2.10_bbk6750.66.m
>>Display ID: MRA58K release-keys
>>Board ID :
>>Build Date: Thu Jan 12 11:43:10 CST 2017
>>
>>
>>Operation:
1. Power off the phone.
2. Please insert USB cable within 40 seconds.
>>
>>MTK USB Port (COM17)
>>
>>Connecting...
>>CPU TYPE:MT6755/50
>>Hardware version:CB00
>>Software version:0001
>>SecCfgVal :0x05000000
>>BromVersion :0x05
>>BLVersion :0xFE
>>Boot downloading complete!
>>EMMC_ID:0x150100525831344d42
>>EMMC_PRODUCT_NAME:
>>EMMC_BOOT1_SIZE:0x400000
>>EMMC_BOOT2_SIZE:0x400000
>>EMMC_PRMB_SIZE:0x400000
>>EMMC_GP1_SIZE:0x0
>>EMMC_GP2_SIZE:0x0
>>EMMC_GP3_SIZE:0x0
>>EMMC_GP4_SIZE:0x0
>>EMMC_USER_SIZE:0x747c00000(29.12G)
>>INT RAM: 0KB SDRAM EXT RAM: 0KB DRAM
>>Find partition success.
>>backup path:C:\Users\xxxx\Desktop\MRT\Inferno\UniTool_Vol _EXT\backup\preloader_bbk6750_66_m_20171215_163139 .bin
>preloader write success.
>preloader_backup write success.
>recovery write success.
>survival write success.
>cust write success.
>apps write success.
>md1img write success.
>md1dsp write success.
>md1arm7 write success.
>md3img write success.
>lk write success.
>lk2 write success.
>boot write success.
>logo write success.
>tee1 write success.
>tee2 write success.
>secro write success.
>system write success.
>cache write success.
>userdata write success.
>>Flash writing complete.
>>Write factory file successfully!

[ramongaru]

telma RDA/COOLSAND 8851a, 8851cl network unlock, invalid sim or sim close

i have 2000 pieces as well, please is urgent

TELMA V034+
TELMA V034+DUO
TELMA X034+DUO

please find me solution.... is a small phone Feature phone

I don't mind sending the phone for solution or I can read dump file and send

[ramongaru]

I don't know why I keep on sending message finding solution and cm2 team never attempt to my problem, what is the essence of buying your product if you cannot provide solution, this is more the 8month I have been requesting for solution. Too bad.. I am not happy at all, this is not a small quantity of phone, I don't mind pay for solution.
So I decided to get volcano box to believed will solve my problem

telma RDA/COOLSAND 8851a, 8851cl network unlock, invalid sim

I need patch file or unlocking file to unlock, just 4mb file

i have 2000 pieces as well, please is urgent

TELMA V034+
TELMA V034+DUO
TELMA X034+DUO

please find me solution.... is a small phone Feature phone

I HAVE DUMP FILE or I SEND THE PHONE TO YOU

[helpo]

YXTEL.Z80-FM_spd6600L



READ FLASH AND FORMAT DONE

 Detection initiated...
  Vcc: 10
  Gnd: null
  Analyzing D+ and D-...
  D+ = 9, D- = 8
  Detection D+/D- with 6.62 seconds!
  Analyzing USB device, please wait...
  Found [SPD] USB device: SCI USB2Serial,(VID_1782&PID_4D00)
  Setting...
  Find USB device:SPRD U2S Diag (COM150), (VID_1782&PID_4D00)
  Pinouts setting complete!
    
    
  Internal version: Spreadtrum Boot Block version 2.0
  Boot downloaded.
  Start boot please wait a moment....
  BOOT Ver: Spreadtrum Boot Block version 1.2
  CPU TYPE:SC6600L [66007005]
  FLASH ID: 002088C4FFFF0043
  Flash Type:[ST]  M36L0R7050T
  Size:0x1000000(16MB)
  Reading completed.
  The data has been saved in D:\backup\spd.backup\_YXTEL.Z80-FM_spd6600L_FullFlash.bin, size: 16 M.
  Detection initiated...
  Vcc: 10
  Gnd: 1 4
  Analyzing D+ and D-...
  D+ = 9, D- = 8
  Detection D+/D- with 0.98 seconds.
  Continue to detect BOOT pin...
  Found [SPD] USB device: SCI USB2Serial,(VID_1782&PID_4D00)
  BOOT(Pull Down) = 5
  Setting...
  Find USB device:SPRD U2S Diag (COM150), (VID_1782&PID_4D00)
  Pinouts setting complete!
    
  Internal version: Spreadtrum Boot Block version 2.0
  Boot downloaded.
  Start boot please wait a moment....
  BOOT Ver: Spreadtrum Boot Block version 1.2
  CPU TYPE:SC6600L [66007005]
  FLASH ID: 002088C4FFFF0043
  Flash Type:[ST]  M36L0R7050T
  Size:0x1000000(16MB)
>>Set to Factory successfully.

[djj007]

>>Ver:1.4.9
>>Current Task: OPPO>>Qualcomm>>Clear Screen Lock>>AUTO
>>Operation:
1.Remove battery and insert battery back.
2.Press and hold 'VolumeUp' and 'VolumeDown' keys.
3.Please insert USB cable within 50 seconds.
Some phones need to use edl cable or special card slot.
>>Port Found[COM43].
>>Hardware Id:0006b0e1
>>Loading Necessary File,Please Wait...
>>Done.
>>Waiting for flash programmer to boot.
>>Loading Build Info,Please Wait...
>>Name: CPH1701
>>Brand: OPPO
>>Device: CPH1701
>>Release Version 6.0.1

[djj007]

Current Task: OPPO>>Qualcomm>>Clear FRP>>AUTO
>>Operation:
1.Remove battery and insert battery back.
2.Press and hold 'VolumeUp' and 'VolumeDown' keys.
3.Please insert USB cable within 50 seconds.
Some phones need to use edl cable or special card slot.
>>Port Found[COM43].
>>Hardware Id:0006b0e1
>>Loading Necessary File,Please Wait...
>>Done.
>>Waiting for flash programmer to boot.
>>Loading Build Info,Please Wait...
>>Name: CPH1701
>>Brand: OPPO
>>Device: CPH1701
>>Release Version 6.0.1
>>BaseBand CPU: QC_Reference_Phone
>>Project Version: CPH1701EX_11_A.15_170523
>>Ext Info: CPH1701
>>Size: 32Gb
>>Done.
>>Clearing FRP lock...
>>Clear FRP lock success

[djj007]

>>Ver:1.4.9
>>Current Task: MI>>Qualcomm>>Remove Mi Account>>AUTO
>>Operation:
1.Remove battery and insert battery back.
2.Press and hold 'VolumeUp' and 'VolumeDown' keys.
3.Please insert USB cable within 50 seconds.
Some phones need to use edl cable or special card slot.
>>Port Found[COM79].
>>Hardware Id:0090b0e1
>>Loading Necessary File,Please Wait...
>>Done.
>>Waiting for flash programmer to boot.
>>Loading Build Info,Please Wait...
>>Name: ferrari
>>Brand: Xiaomi
>>Device: ferrari
>>Release Version 5.0.2
>>BaseBand CPU: msm8916
>>Project Version: LRX22G
>>Ext Info: Mi 4i
>>Size: 16Gb
>>Done.
>>Clearing...
>>Clear Success

[Sagar2567]

Redmi Y1 Mi Account Done

[djj007]

>>Current Task:
BootLoader Fastboot
>>Ver:1.4.5

>>Please make the device in fastboot mode, firstly.Hold"Vol Up + Power" or "Vol Down + Power" to enter fastboot mode.

>>Remove BootLoader Lock...

>>Please remove BootLoader Lock as the phone showing.

>>Remove BootLoader Lock OK, the phone is rebooting.

[bright hlatini]

MI 2014811 ACCOUNT SUCCESSFULLY REMOVED

>>Ver:1.4.8
>>Current Task: MI>>Qualcomm>>Remove Mi Account>>AUTO
>>Operation:
1.Remove battery and insert battery back.
2.Press and hold 'VolumeUp' and 'VolumeDown' keys.
3.Please insert USB cable within 50 seconds.
Some phones need to use edl cable or special card slot.
>>Port Found[COM57].
>>Hardware Id:007050e1
>>Loading Necessary File,Please Wait...
>>Done.
>>Waiting for flash programmer to boot.
>>Loading Build Info,Please Wait...
>>Name: 2014811
>>Brand: Xiaomi
>>Device: HM2014811
>>Release Version 4.4.4
>>BaseBand CPU: msm8916
>>Project Version: KTU84P
>>Ext Info: 2014811
>>Size: 16Gb
>>Done.
>>Clearing...
>>Clear Success