Post Here ALL Successful Repaired Phone By Volcano/Inferno [SUCCESS REPORTS BY USERS] - Page 3 - GSM-Forum

.::ARD::. · 03-12-2012, 10:35

Scann, Format Done and IMEI Not Broken
SpreadTrum 6600L By Volcano

Regard,
Volcano Box
Ahead Of All

andy_gal · 03-12-2012, 11:34

Volcano Updated: 2012-03-08
Connecting...
Connection successful,connected state!
Version: V3.8
SN:007-666-000
Port:COM77
Detecting rx and tx...
Vcc: null
Gnd: 2 4
Detection initiated, connect the phone and power on it...
MT6225, RX: 9, TX: 7
Detection completed with 3.56 seconds!
Detecting rx and tx...
Vcc: null
Gnd: 2 4
Detection initiated, connect the phone and power on it...
MT6225, RX: 9, TX: 7
Detection completed with 3.26 seconds!
Detecting rx and tx...
Vcc: null
Gnd: 2 4
Detection initiated, connect the phone and power on it...
MT6225, RX: 9, TX: 7
Detection completed with 3.25 seconds!
Detecting rx and tx...
Vcc: null
Gnd: 2 4
Detection initiated, connect the phone and power on it...
MT6225, RX: 9, TX: 7
>>Detection completed with 3.26 seconds!

Br

saeedullah_khan · 03-12-2012, 13:33

Detection initiated...
Vcc: 7
Gnd: 2
Analyzing D+ and D-...
D+ = 6, D- = 8
Detection D+/D- with 4.55 seconds!
Analyzing USB device, please wait...
Found [SPD] USB device: SCI USB2Serial,(VID_1782&PID_4D00)
Setting...
Find USB device:SCI USB2Serial (COM3), (VID_1782&PID_4D00)
Pinouts setting complete!

Internal version: SPRD3
Boot downloaded.
Start boot please wait a moment....
Boot fileSpreadtrum Boot Block version 1.1
Boot downloaded.
CPU TYPE:SC6800H [68000000]
Flash ID: 00AD00A1
Flash Type:[Hyundai] HY27UF081G2A/M
FLASH LEN:0x8000000
--------------------------------------.
Phone imei lists.
IMEI1:355608043850073
IMEI2:355608043850081
IMEI3:358570010103893

Read Info finish.

Detection initiated...
Vcc: 7
Gnd: 2
Analyzing D+ and D-...
D+ = 6, D- = 8
Detection D+/D- with 4.53 seconds!
Analyzing USB device, please wait...
Found [SPD] USB device: SCI USB2Serial,(VID_1782&PID_4D00)
Setting...
Find USB device:SCI USB2Serial (COM3), (VID_1782&PID_4D00)
Pinouts setting complete!

Internal version: SPRD3
Boot downloaded.
Start boot please wait a moment....
Boot fileSpreadtrum Boot Block version 1.1
Boot downloaded.
CPU TYPE:SC6800H [68000000]
Flash ID: 00AD00A1
Flash Type:[Hyundai] HY27UF081G2A/M
FLASH LEN:0x8000000
Reading completed.
>>The data has been saved in C:\Documents and Settings\SAEED\Desktop\ROKEA R212 6800H MOCOR_10A.W11.42_P3_QVGA_05_Release_20120312_17191 8_FullFlash(VOLCANO READED FILE).bin, size: 132 M.

akhil_bbsr · 03-12-2012, 13:54

CITYCALL M500 DONE

akhil_bbsr · 03-12-2012, 13:55

Lot more coming just stay tune...........

Volcano Box · 03-12-2012, 15:16

[CENTER]Scan_ReadFlash Mstar 8533x Family Series
File Size 132M

With Volcano Box

Volcano Box · 03-12-2012, 15:20

http://forum.gsmhosting.com/vbb/f723...o-box-1442067/
to day i receive HTC spd 6800h1

problem :touch screen not working

story:
customer says me .when i enter in setting and click on mouse in option after that touch screen not working.before click touch screen working.

my work on mobile

(1)read info
here is logs

Volcano Updated: 2012-03-10
Connecting...
Connection successful,connected state!
Version: V3.8
SN:011-475-873
Port:COM20
Available Ports:COM1 COM20
Detection initiated...
Vcc: 7
Gnd: 2
Analyzing D+ and D-...
D+ = 6, D- = 8
Detection D+/D- with 4.53 seconds!
Analyzing USB device, please wait...
Found [SPD] USB device: SCI USB2Serial,(VID_1782&PID_4D00)
Setting...
Find USB device:SCI USB2Serial (COM27), (VID_1782&PID_4D00)
Pinouts setting complete!

Internal version: SPRD3
Boot downloaded.
Start boot please wait a moment....
Boot fileSpreadtrum Boot Block version 1.1
Boot downloaded.
CPU TYPE:SC6800H [68000000]
Flash ID: 00AD00A1
Flash Type:[Hyundai] HY27UF081G2A/M
FLASH LEN:0x8000000
--------------------------------------.
Phone imei lists.
IMEI1:352642048807336
IMEI2:352642048807344
IMEI3:358570010103893

Read Info finish.
>>

(2) read flash
here is logs
Detection initiated...
Vcc: 7
Gnd: 2
Analyzing D+ and D-...
D+ = 6, D- = 8
Detection D+/D- with 4.55 seconds!
Analyzing USB device, please wait...
Found [SPD] USB device: SCI USB2Serial,(VID_1782&PID_4D00)
Setting...
Find USB device:SCI USB2Serial (COM27), (VID_1782&PID_4D00)
Pinouts setting complete!

Internal version: SPRD3
Boot downloaded.
Start boot please wait a moment....
Boot fileSpreadtrum Boot Block version 1.1
Boot downloaded.
CPU TYPE:SC6800H [68000000]
Flash ID: 00AD00A1
Flash Type:[Hyundai] HY27UF081G2A/M
FLASH LEN:0x8000000
Reading completed.
>>The data has been saved in C:\Documents and Settings\SAEED\Desktop\MOCOR_PDA_1.2_Release_20120 312_134014_FullFlash.bin, size: 132 M.

(3) formatting

here is logs

Vcc: 7
Gnd: 2
Analyzing D+ and D-...
D+ = 6, D- = 8
Detection D+/D- with 4.52 seconds!
Analyzing USB device, please wait...
Found [SPD] USB device: SCI USB2Serial,(VID_1782&PID_4D00)
Setting...
Find USB device:SCI USB2Serial (COM27), (VID_1782&PID_4D00)
Pinouts setting complete!

Internal version: SPRD3
Boot downloaded.
Start boot please wait a moment....
Boot fileSpreadtrum Boot Block version 1.1
Boot downloaded.
CPU TYPE:SC6800H [68000000]
Flash ID: 00AD00A1
Flash Type:[Hyundai] HY27UF081G2A/M
>>Set to Factory successfully.

"after formatting set not power on :

and then

(4) write flash
here is logs
2012-03-12 2:05:11 PM >>Detection initiated...
2012-03-12 2:05:12 PM >>Vcc: 7
2012-03-12 2:05:12 PM >>Gnd: 2
2012-03-12 2:05:12 PM >>Analyzing D+ and D-...
2012-03-12 2:05:18 PM >>D+ = 6, D- = 8
2012-03-12 2:05:18 PM >>Detection D+/D- with 4.53 seconds!
2012-03-12 2:05:18 PM >>Analyzing USB device, please wait...
2012-03-12 2:05:28 PM >>Found [SPD] USB device: SCI USB2Serial,(VID_1782&PID_4D00)
2012-03-12 2:05:28 PM >>Setting...
2012-03-12 2:05:30 PM >>Find USB device:SCI USB2Serial (COM27), (VID_1782&PID_4D00)
2012-03-12 2:05:30 PM >>Pinouts setting complete!
2012-03-12 2:05:30 PM >>The file loaded is integral,it can be used to write full flash!
2012-03-12 2:05:30 PM >>
2012-03-12 2:05:30 PM >>
2012-03-12 2:05:33 PM >>Internal version: SPRD3
2012-03-12 2:05:33 PM >>Boot downloading...
2012-03-12 2:05:33 PM >>Start boot please wait a moment....
2012-03-12 2:05:35 PM >>Boot fileSpreadtrum Boot Block version 1.1
2012-03-12 2:05:36 PM >>Boot downloading...
2012-03-12 2:05:36 PM >>CPU TYPE:SC6800H [68000000]
2012-03-12 2:05:36 PM >>Flash ID: 00AD00A1
2012-03-12 2:05:36 PM >>Flash Type:[Hyundai] HY27UF081G2A/M
2012-03-12 2:05:36 PM >>FLASH LEN:0x8000000
2012-03-12 2:05:36 PM >>Writing...(0)
2012-03-12 2:10:11 PM >>Flash file C:\Documents and Settings\SAEED\Desktop\MOCOR_PDA_1.2_Release_20120 312_134014_FullFlash.bin has been written.

know set is on and touch screen working 100%

thanks volcano team

Volcano Box · 03-12-2012, 15:21

c5 mstart read flash write flash pass read sucessfully with volcano box ver 1.1.1

Detection initiated...
Vcc: null
Gnd: 5
Analyzing D+ and D-...
D+ = 3, D- = 2
Detection D+/D- with 0.89 seconds!
Analyzing USB device, please wait...
Found [MSTAR]USB device:GCREADER USB Device,(VID_1B20&PID_0300)
Setting...
Find USB device:GCREADER USB Device, (VID_1B20&PID_0300)
Pinouts setting complete!
Connecting to phone...
Connection success!
Boot downloading finished.
Flash Type: GIGA_GD25Q64
Flash ID: 00C8601700000000
Flash Size: 00800000h
Read Size: 00800000h(8M)
CPU : 8533d/8532_series
Flash Reading...
Flash Reading finished
Phone Lock or SIM Lock:
0000
1000
Anti-theft lock:
460000
460001
0755
4600
screen lock:
>>The data has been saved in C:\Documents and Settings\Admin\Desktop\c5 mstar cpu read full flash.bin, size: 8 M.

http://forum.gsmhosting.com/vbb/f723...ucess-1441868/

Volcano Box · 03-12-2012, 15:23

Quote:

Originally Posted by sms_sudheer

full work volcano box
bro

Quote:

analyzing d+ and d-...
D+ = 3, d- = 2
detection d+/d- with 3.66 seconds.
Continue to detect boot pin...
Found [mstar]usb device:gcreader usb device,(vid_1b20&pid_0300)
boot(pull down) = 4
setting...
Find usb device:gcreader usb device, (vid_1b20&pid_0300)
pinouts setting complete!
Connecting to phone...
Connection success!
Boot downloading finished.
Flash type: Giga_gd25q64
flash id: 00c8601700000000
flash size: 00800000h
read size: 00800000h(8m)
cpu : 8533d/8532_series
flash reading...
Flash reading finished
phone lock or sim lock:
0000
anti-theft lock:
460000
460001
466001
4600
4660
screen lock:
>>the data has been saved in d:\marvz_flashfiles\china box back up\volcano back up\mstar\tt800.bin, size: 8 m.

done..........................

http://forum.gsmhosting.com/vbb/f723...4/#post8224129

gsm_links · 03-12-2012, 15:27

2012-03-12 4:47:52 AM >>Volcano Updated: 2012-03-12
2012-03-12 4:47:52 AM >>Connecting...
2012-03-12 4:47:54 AM >>Connection successful,connected state!
2012-03-12 4:47:54 AM >>Version: V3.8
2012-03-12 4:47:54 AM >>SN:001-816-195
2012-03-12 4:47:54 AM >>Port:COM80
2012-03-12 4:58:52 AM >>Connecting...
2012-03-12 4:58:53 AM >>Connection successful,connected state!
2012-03-12 4:58:53 AM >>Version: V3.8
2012-03-12 4:58:53 AM >>SN:001-816-195
2012-03-12 4:58:53 AM >>Port:COM80
2012-03-12 4:59:09 AM >>Information Tip:
2012-03-12 4:59:09 AM >>1) If the Flash is KAD0707,Please manually choose 'Boot E recommended'
2012-03-12 4:59:09 AM >>2) If the Flash is TY0067,Please manually choose 'Boot G recommended'
2012-03-12 4:59:39 AM >>
2012-03-12 4:59:39 AM >>
2012-03-12 5:08:55 AM >>Connecting...
2012-03-12 5:08:56 AM >>Connection successful,connected state!
2012-03-12 5:08:56 AM >>Version: V3.8
2012-03-12 5:08:56 AM >>SN:001-816-195
2012-03-12 5:08:56 AM >>Port:COM80
2012-03-12 5:10:20 AM >>Available Ports:COM1 COM80
2012-03-12 5:10:20 AM >>Detection initiated, connect the phone and power on it...
2012-03-12 5:10:21 AM >>Vcc: null
2012-03-12 5:10:21 AM >>Gnd: 20
2012-03-12 5:10:21 AM >>Analyzing Rx and Tx...
2012-03-12 5:10:40 AM >>MT6235, RX: 23, TX: 22
2012-03-12 5:10:40 AM >>Setting...
2012-03-12 5:10:41 AM >>Pinouts setting complete!
2012-03-12 5:10:41 AM >>
0391292012 5:10:42 AM >>
0391292012 5:10:42 AM >>
2012-03-12 5:10:47 AM >>Connecting...
0391292012 5:10:47 AM >>Connecting...
2012-03-12 5:10:47 AM >>Hardware version:8A04
0391292012 5:10:47 AM >>Hardware version:8A04
2012-03-12 5:10:47 AM >>Software version:8A01
0391292012 5:10:47 AM >>Software version:8A01
2012-03-12 5:10:47 AM >>CPU TYPE:6235
0391292012 5:10:47 AM >>CPU TYPE:6235
2012-03-12 5:10:47 AM >>Internal version:0000
0391292012 5:10:47 AM >>Internal version:0000
2012-03-12 5:10:48 AM >>Boot downloading...
0391292012 5:10:48 AM >>Boot downloading...
2012-03-12 5:11:00 AM >>Flash ID: 00200036
0391292012 5:11:00 AM >>Flash ID: 00200036
2012-03-12 5:11:00 AM >>Flash Type: NAND_ST512R3A
0391292012 5:11:00 AM >>Flash Type: NAND_ST512R3A
2012-03-12 5:11:00 AM >>Chip Capacity: 0x4000000(64MB)
0391292012 5:11:00 AM >>Chip Capacity: 0x4000000(64MB)
2012-03-12 5:11:00 AM >>Mobile phone software version for:E5.2AV01V01.04
0391292012 5:11:00 AM >>Mobile phone software version for:E5.2AV01V01.04
2012-03-12 5:11:01 AM >>Baud adjust...
0391292012 5:11:01 AM >>Baud adjust...
2012-03-12 5:11:03 AM >>Read phone information success.
0391292012 5:11:03 AM >>Read phone information success.
2012-03-12 5:11:30 AM >>Detection initiated, connect the phone and power on it...
2012-03-12 5:11:32 AM >>Vcc: null
2012-03-12 5:11:32 AM >>Gnd: 20
2012-03-12 5:11:32 AM >>Analyzing Rx and Tx...
2012-03-12 5:11:35 AM >>MT6235, RX: 23, TX: 22
2012-03-12 5:11:35 AM >>Setting...
2012-03-12 5:11:36 AM >>Pinouts setting complete!
2012-03-12 5:11:36 AM >>
0391292012 5:11:37 AM >>
0391292012 5:11:37 AM >>
2012-03-12 5:11:37 AM >>Connecting...
0391292012 5:11:37 AM >>Connecting...
2012-03-12 5:11:38 AM >>Hardware version:8A04
0391292012 5:11:38 AM >>Hardware version:8A04
2012-03-12 5:11:38 AM >>Software version:8A01
0391292012 5:11:38 AM >>Software version:8A01
2012-03-12 5:11:38 AM >>CPU TYPE:6235
0391292012 5:11:38 AM >>CPU TYPE:6235
2012-03-12 5:11:38 AM >>Internal version:0000
0391292012 5:11:38 AM >>Internal version:0000
2012-03-12 5:11:38 AM >>>>Connecting, please hold on the power key...
0391292012 5:11:38 AM >>>>Connecting, please hold on the power key...
2012-03-12 5:11:45 AM >>Can loosen the phone is switched on key
0391292012 5:11:45 AM >>Can loosen the phone is switched on key
2012-03-12 5:11:45 AM >>Start analysis flash internal data.
0391292012 5:11:45 AM >>Start analysis flash internal data.
2012-03-12 5:12:14 AM >>Solution of complete network lock.
0391292012 5:12:14 AM >>Solution of complete network lock.

Wbr

Volcano Box · 03-12-2012, 15:31

Quote:

Originally Posted by Volcano Box

post log please.............

Detection initiated...
Vcc: null
Gnd: 18
Analyzing D+ and D-...
D+ = 21, D- = 22
Detection D+/D- with 20.28 seconds!
Analyzing USB device, please wait...
Found [MSTAR]USB device:GCREADER USB Device,(VID_1B20&PID_0300)
Setting...
Find USB device:GCREADER USB Device, (VID_1B20&PID_0300)
Pinouts setting complete!
Connecting to phone...
Connection success!
Boot downloading finished.
Flash Type: NUMONYX_M58LR128KT
Flash ID: 002088C400000000
Flash Size: 01000000h
Read Size: 01000000h(16M)
CPU : 8533x_family_series
Flash Reading...
Flash Reading finished
Phone Lock or SIM Lock:
0000
Anti-theft lock:
100000
460000
460001
466

http://forum.gsmhosting.com/vbb/f723...6/#post8223876

Volcano Box · 03-12-2012, 15:34

http://forum.gsmhosting.com/vbb/f723...ml#post8223317

Volcano Box · 03-12-2012, 15:35

my first day with volcano
thanx mr. ashok garg from india for supplying box in time
read sucessfully 2mb new flash by usb detection way.
fone muphone m1000
cpu mtk 6250
flash sf_mx25u1635e
size 2mb

Uploaded with ImageShack.us

http://forum.gsmhosting.com/vbb/f723...ad-ok-1441631/

Volcano Box · 03-12-2012, 15:38

Yxtel C6 fully supported by VolcanoBox:

Here are the logs:

Read Info:

Code:

  Detection initiated...
  Vcc: null
  Gnd: 5
  Analyzing D+ and D-...
  D+ = 3, D- = 2
  Detection D+/D- with 0.97 seconds!
  Analyzing USB device, please wait...
  Found [MSTAR]USB device:GCREADER USB Device,(VID_1B20&PID_0300)
  Setting...
  Find USB device:GCREADER USB Device, (VID_1B20&PID_0300)
  Pinouts setting complete!
  Connecting to phone...
  Connection success!
  Boot downloading finished.
  Flash Type: GIGA_GD25Q64
  Flash ID:   00C8601700000000
  Flash Size: 00800000h
>>Read phone information seccess.

Read FullFlash togather with Phone Lock, SIM Lock, Anti-theif and Screen Lock:

Code:

  Detection initiated...
  Vcc: null
  Gnd: 5
  Analyzing D+ and D-...
  D+ = 3, D- = 2
  Detection D+/D- with 1.00 seconds!
  Analyzing USB device, please wait...
  Found [MSTAR]USB device:GCREADER USB Device,(VID_1B20&PID_0300)
  Setting...
  Find USB device:GCREADER USB Device, (VID_1B20&PID_0300)
  Pinouts setting complete!
  Connecting to phone...
  Connection success!
  Boot downloading finished.
  Flash Type: GIGA_GD25Q64
  Flash ID:   00C8601700000000
  Flash Size: 00800000h
  Read Size: 00800000h(8M)
  CPU : 8533d/8532_series
  Flash Reading...
  Flash Reading finished
  Phone Lock or SIM Lock:
  0000
  1000
  Anti-theft lock:
  460000
  460001
  6789
  screen lock:
>>The data has been saved in G:\VolcanoBox\Flashes\Mstar\YXTEL C6\Yxtel C6\FullFlash Yxtel C6.bin, size: 8 M.

Write FullFlash:

Code:

  Detection initiated...
  Vcc: null
  Gnd: 5
  Analyzing D+ and D-...
  D+ = 3, D- = 2
  Detection D+/D- with 1.00 seconds!
  Analyzing USB device, please wait...
  Found [MSTAR]USB device:GCREADER USB Device,(VID_1B20&PID_0300)
  Setting...
  Find USB device:GCREADER USB Device, (VID_1B20&PID_0300)
  Pinouts setting complete!
  Available Ports:COM1 COM86 
  Current Port:COM86
  Connecting to phone...
  Connection success!
  Boot downloading finished.
  Flash Type: GIGA_GD25Q64
  Flash ID:   00C8601700000000
  Flash Size: 00800000h
  CPU : 8533d/8532_series
  Flash Erasing finished
>>Flash Writing finished.

Read IMEI:

Code:

 Connection successful,connected state!
  Version: V3.8
  SN:00X-XXX-XXX
  Port:COM86
  Available Ports:COM1 COM86 COM190 
  Current Port:COM190
  IMEI reading...
  IMEI1: 111111111111111
  IMEI2: 111111111111111
  IMEI Read complete.

Write IMEI:

Code:

  IMEI writing...
  IMEI write complete.
  IMEI reading...
  IMEI1: 356296043941511
  IMEI2: 356296043941529
>>IMEI Read complete.

BR

http://forum.gsmhosting.com/vbb/f723...pport-1441254/

Volcano Box · 03-12-2012, 15:40

http://forum.gsmhosting.com/vbb/f723...3/#post8219857

03-12-2012, 11:34	#32 (permalink)
andy_gal Freak Poster Join Date: Mar 2006 Location: Surabaya Posts: 293 Member: 247433 Status: Offline Thanks Meter: 25	Very fast to scan rx tx MTK Volcano Updated: 2012-03-08 Connecting... Connection successful,connected state! Version: V3.8 SN:007-666-000 Port:COM77 Detecting rx and tx... Vcc: null Gnd: 2 4 Detection initiated, connect the phone and power on it... MT6225, RX: 9, TX: 7 Detection completed with 3.56 seconds! Detecting rx and tx... Vcc: null Gnd: 2 4 Detection initiated, connect the phone and power on it... MT6225, RX: 9, TX: 7 Detection completed with 3.26 seconds! Detecting rx and tx... Vcc: null Gnd: 2 4 Detection initiated, connect the phone and power on it... MT6225, RX: 9, TX: 7 Detection completed with 3.25 seconds! Detecting rx and tx... Vcc: null Gnd: 2 4 Detection initiated, connect the phone and power on it... MT6225, RX: 9, TX: 7 >>Detection completed with 3.26 seconds! Br

03-12-2012, 13:33	#33 (permalink)
saeedullah_khan Product Supporter Join Date: Aug 2007 Location: karachi Posts: 5,304 Member: 572216 Status: Offline Sonork: 100.1612300 Thanks Meter: 3,737	Test report rokea r212 6800h read info and read flash Detection initiated... Vcc: 7 Gnd: 2 Analyzing D+ and D-... D+ = 6, D- = 8 Detection D+/D- with 4.55 seconds! Analyzing USB device, please wait... Found [SPD] USB device: SCI USB2Serial,(VID_1782&PID_4D00) Setting... Find USB device:SCI USB2Serial (COM3), (VID_1782&PID_4D00) Pinouts setting complete! Internal version: SPRD3 Boot downloaded. Start boot please wait a moment.... Boot fileSpreadtrum Boot Block version 1.1 Boot downloaded. CPU TYPE:SC6800H [68000000] Flash ID: 00AD00A1 Flash Type:[Hyundai] HY27UF081G2A/M FLASH LEN:0x8000000 --------------------------------------. Phone imei lists. IMEI1:355608043850073 IMEI2:355608043850081 IMEI3:358570010103893 Read Info finish. Detection initiated... Vcc: 7 Gnd: 2 Analyzing D+ and D-... D+ = 6, D- = 8 Detection D+/D- with 4.53 seconds! Analyzing USB device, please wait... Found [SPD] USB device: SCI USB2Serial,(VID_1782&PID_4D00) Setting... Find USB device:SCI USB2Serial (COM3), (VID_1782&PID_4D00) Pinouts setting complete! Internal version: SPRD3 Boot downloaded. Start boot please wait a moment.... Boot fileSpreadtrum Boot Block version 1.1 Boot downloaded. CPU TYPE:SC6800H [68000000] Flash ID: 00AD00A1 Flash Type:[Hyundai] HY27UF081G2A/M FLASH LEN:0x8000000 Reading completed. >>The data has been saved in C:\Documents and Settings\SAEED\Desktop\ROKEA R212 6800H MOCOR_10A.W11.42_P3_QVGA_05_Release_20120312_17191 8_FullFlash(VOLCANO READED FILE).bin, size: 132 M.

03-12-2012, 10:35	#31 (permalink)
.::ARD::. Product Supporter Join Date: Dec 2011 Location: Indonesia / Guangzhou Age: 38 Posts: 5,036 Member: 1705891 Status: Offline Sonork: 100.1604564 Thanks Meter: 8,139	Scann, Format Done and IMEI Not Broken SpreadTrum 6600L By Volcano Regard, Volcano Box Ahead Of All

03-12-2012, 13:54	#34 (permalink)
akhil_bbsr No Life Poster Join Date: May 2006 Location: MOBILE SOFTZONE BHUBANESWAR IN Posts: 3,509 Member: 271478 Status: Offline Sonork: 1590868 Thanks Meter: 1,070	CITYCALL M500 DONE

03-12-2012, 13:55	#35 (permalink)
akhil_bbsr No Life Poster Join Date: May 2006 Location: MOBILE SOFTZONE BHUBANESWAR IN Posts: 3,509 Member: 271478 Status: Offline Sonork: 1590868 Thanks Meter: 1,070	Lot more coming just stay tune...........

03-12-2012, 15:16	#36 (permalink)
Volcano Box No Life Poster Join Date: Jan 2012 Posts: 1,176 Member: 1716315 Status: Offline Thanks Meter: 4,634	[CENTER]Scan_ReadFlash Mstar 8533x Family Series File Size 132M With Volcano Box

03-12-2012, 15:21	#38 (permalink)
Volcano Box No Life Poster Join Date: Jan 2012 Posts: 1,176 Member: 1716315 Status: Offline Thanks Meter: 4,634	c5 mstart read flash write flash pass read sucessfully with volcano box ver 1.1.1 Detection initiated... Vcc: null Gnd: 5 Analyzing D+ and D-... D+ = 3, D- = 2 Detection D+/D- with 0.89 seconds! Analyzing USB device, please wait... Found [MSTAR]USB device:GCREADER USB Device,(VID_1B20&PID_0300) Setting... Find USB device:GCREADER USB Device, (VID_1B20&PID_0300) Pinouts setting complete! Connecting to phone... Connection success! Boot downloading finished. Flash Type: GIGA_GD25Q64 Flash ID: 00C8601700000000 Flash Size: 00800000h Read Size: 00800000h(8M) CPU : 8533d/8532_series Flash Reading... Flash Reading finished Phone Lock or SIM Lock: 0000 1000 Anti-theft lock: 460000 460001 0755 4600 screen lock: >>The data has been saved in C:\Documents and Settings\Admin\Desktop\c5 mstar cpu read full flash.bin, size: 8 M. http://forum.gsmhosting.com/vbb/f723...ucess-1441868/

03-12-2012, 15:34	#42 (permalink)
Volcano Box No Life Poster Join Date: Jan 2012 Posts: 1,176 Member: 1716315 Status: Offline Thanks Meter: 4,634	http://forum.gsmhosting.com/vbb/f723...ml#post8223317

03-12-2012, 15:35	#43 (permalink)
Volcano Box No Life Poster Join Date: Jan 2012 Posts: 1,176 Member: 1716315 Status: Offline Thanks Meter: 4,634	my first day with volcano thanx mr. ashok garg from india for supplying box in time read sucessfully 2mb new flash by usb detection way. fone muphone m1000 cpu mtk 6250 flash sf_mx25u1635e size 2mb Uploaded with ImageShack.us http://forum.gsmhosting.com/vbb/f723...ad-ok-1441631/

03-12-2012, 15:40	#45 (permalink)
Volcano Box No Life Poster Join Date: Jan 2012 Posts: 1,176 Member: 1716315 Status: Offline Thanks Meter: 4,634	http://forum.gsmhosting.com/vbb/f723...3/#post8219857