Post Here Your Volcano Box Solutions / Manuals / Tutorial Only

[shanry]

procedure/guide how to unlock ZTE ANDROID V795

OPEN VOLCANO
OPEN ANDROID TAB
as you can see ZTE V795 is not in list select what in picture




LOGS

Partition: SEC_RO Start = 0X2F80000 Len = 0X40000
Partition: MISC Start = 0X2FC0000 Len = 0X80000
Partition: LOGO Start = 0X3040000 Len = 0X300000
Partition: EXPDB Start = 0X3340000 Len = 0XA00000
Partition: ANDROID Start = 0X3D40000 Len = 0X28A00000
Partition: CACHE Start = 0X2C740000 Len = 0X17800000
Partition: USRDATA Start = 0X43F40000 Len = 0X52C00000
Partition: FAT Start = 0X96B40000 Len = 0X4F5C0000
Partition: BMTPOOL Start = 0XFFFF00A8 Len = 0X0
DOWNLOAD INFORMATION!!
Version: V1.0
Ram checksum: DRAM_PASS
Download status: DL_CK_DONE
Image: MBR : PASS
Image: EBR1 : PASS
Image: UBOOT : PASS



Block2(NS):Unlocked Code: 56781234
Block3(SP):Unlocked Code: 11112222
Block4(C ):Unlocked Code: 33334444
Block5(SIM):Unlocked Code: 55556666

Start direct unlock...
Simlock Info : Sim(2)
Block1(N ):Locked (remain:1) Code : 12345678
Block2(NS):Unlocked Code: 56781234
Block3(SP):Unlocked Code: 11112222
Block4(C ):Unlocked Code: 33334444
Block5(SIM):Unlocked Code: 55556666

Start direct unlock...
All done.

[aZimBahar]

How To flash MTK Android With Factory (FAC) File Using Volcano


Open Volcano Android Tools & Select Go To USB Tab

Select Write FAC File & Click Start



Now Select Sactter File & Click Ok





See Setting Ok





Now Your Volcano Searching For Port
Connect Phone To Boot Mode



Flashing Start


On Flashing ......



Flashing Done


Br
One-Man
..::AzimBahar::..

[AniAxn]

How to Write IMEI in SPD 6820/8810 Using New Method with Volcano


Run Latest Volcano Exe ..
Go Detect Tab & Sey Pin-Out Manually



After Set Pin-out Remove Main Cable From Box



Now Go SPD Tab & Enable Imei & Select This Step



A New Window Come like Bellow
Now Fill The Phone Original IMEI on IMEI Box



Click To Start ..
Now Connect Main Cable to Box



When IMEI box Show Green Box Like Bellow
Now IMEI write Complete



See The IMEI After Rebuild




Wbr,
AniAXN

[AniAxn]

How To Enter Recovery Mode Using Shift Mode using Volcano

Just Enter Factory Mode any Spd or MTK Android
Connect USB Cable
Phone will Connect via ADB



Run Volcano & Go ADB Mode



Now Phone Come on Recovery Mode




Wbr,
AniAXN

[AniAxn]

Volcano Box Positive & Negative null ... !! How to Solve ..





If User Face this Kind Of Problem
Do First System Recovery Also Update All Driver
If Still Same ..Do As Bellow Like this Pic



After Doing Modify PCB Now See



Wbr,
AniAXN

[AniAxn]

How To Write Fac File on MTK Android Phone


... Follow It Step By Step ...
Click To Android Tool



Select First CPU Type & Write Fac File & Click To Start


Select Scatter File From Your Factory Folder


After Lode Click To OK


Now Connect the Phone With USB Cable press Boot Key




Best Regard
AniAXN

[goherabbas]

Hy all i am facing that problem in windows 10 i have searched more and more but in vain to solve that issue finally i have find a way to solve that problem have a look here....

After Installing the drivers:

And he gets the "Code 10" error:

Now fix that problem with Profilic_Win8_x64_x86.zip

Extract the contents of this file:

Right click the .inf file, and select "Install".

Then Update the Drivers again:

In the resulting dialog, click "Browse my computer for driver software":


Select "Let me pick from a list of device drivers on my computer":

Select the Prolific driver version 3.3.2 from 2008:

Drivers will install fine and works ok

so that is all..

Check this and post results if you like it click Thanks botton <3

Best Regards
Gohar Abbas

[goherabbas]

Here is the orignal web link

[AniAxn]

How to Erase MTK Full Flash with Volcano Box

Why need to Full Erase ?

Many time User Face No Service , No Network , Unknown Base-band or similar Problem on MTK Android .That time Need to do Full Flash Erase .

• Run Latest Volcano exe .
• Go to MTK Tab .
• Select Boot 15(V7.14520)(65xx/88xx_Android) .
• Click USB Mode .
• Untick Auto detect Pin-out .
• Select Format & Do Run .
• A Tip Box Come & Click Yes .
• Now Format window Come .
• Click Full Flash & Do OK .
• Now Reinsert Buttery & Connect USB cable .

Now The Phone is Full Erased[Dead Condition]

Note - Before Do any think always make backup first or Keep Stock Rom on your PC . Because after full erase your Phone will Dead . Now need to Write Full Firmware to Alive Phone ..



Wbr,
AniAXN

[sobaro]

Hello , If u want to backup a tablet flash file with Volcano
You have to do the following things in order to make it work again on the same tablet or same Board ID . Or you will stuck at logo.

First You have to read info via volcano (this is the most important thing)


eg:

analysis of USB port,Please insert phone USB cable.
  Connecting...
  CPU TYPE:MT6572
  Hardware version:CA01
  Software version:0000
  SecCfgVal :0x00000000
  BromVersion :0xFF
  BLVersion :0x01
  Boot downloading complete!
  EMMC_ID:0x8801034E4361726420356C07301152E1
  EMMC_PRODUCT_NAME: SAMSUNG :0x4E4361726420
  EMMC_BOOT1_SIZE: 0x00400000
  EMMC_BOOT2_SIZE: 0x00400000
  EMMC_PRMB_SIZE: 0x00020000
  EMMC_GP1_SIZE: 0x00000000
  EMMC_GP2_SIZE: 0x00000000
  EMMC_GP3_SIZE: 0x00000000
  EMMC_GP4_SIZE: 0x00000000
  EMMC_USER_SIZE: 0x1CE100000(7.22 G)
   
    
    
  Analysis of system files...
  PRELOADER:  addr:0x000000 --length:0xA00000
  MBR:  addr:0xA00000 --length:0x080000
  EBR1:  addr:0xA80000 --length:0x080000
  PRO_INFO:  addr:0xB00000 --length:0x300000
  NVRAM:  addr:0xE00000 --length:0x500000
  PROTECT_F:  addr:0x1300000 --length:0xA00000
  PROTECT_S:  addr:0x1D00000 --length:0xA00000
  SECCFG:  addr:0x2700000 --length:0x020000
  UBOOT:  addr:0x2720000 --length:0x060000
  BOOTIMG:  addr:0x2780000 --length:0x600000
  RECOVERY:  addr:0x2D80000 --length:0x600000
  SEC_RO:  addr:0x3380000 --length:0x040000
  MISC:  addr:0x33C0000 --length:0x080000
  LOGO:  addr:0x3440000 --length:0x300000
  EXPDB:  addr:0x3740000 --length:0xA00000
  ANDROID:  addr:0x4140000 --length:0x35200000
  CACHE:  addr:0x39340000 --length:0x17800000
  USRDATA:  addr:0x50B40000 --length:0x81700000
  FAT:  addr:0xD2240000 --length:0xFB1E0000
  BMTPOOL:  addr:0xFFFF00A8 --length:0x1500000
   
   
    Format addr:0x50B40000 --Format length:0x81700000
  Read phone information success.
>>Not find lock data .

Second: make backup via Volcano Box

Now : if you Write back the same backup for the same tablet, your tablet will stuck at logo and you will not be able to reset user data in recovery (you will face problem Error Mount Data)

Where is the problem?

The problem is in Scatter File
If you look at Starting addresses in the Analysis of system files u first make by volcano , You will see that it is different from addresses in The scatter file made by volcano when backing up...

Like this example :

info before backup:

Analysis of system files...
  PRELOADER:  addr:0x000000 --length:0xA00000
  MBR:  addr:0xA00000 --length:0x080000
  EBR1:  addr:0xA80000 --length:0x080000
  PRO_INFO:  addr:0xB00000 --length:0x300000
  NVRAM:  addr:0xE00000 --length:0x500000
  PROTECT_F:  addr:0x1300000 --length:0xA00000
  PROTECT_S:  addr:0x1D00000 --length:0xA00000
  SECCFG:  addr:0x2700000 --length:0x020000
  UBOOT:  addr:0x2720000 --length:0x060000
  BOOTIMG:  addr:0x2780000 --length:0x600000
  RECOVERY:  addr:0x2D80000 --length:0x600000
  SEC_RO:  addr:0x3380000 --length:0x040000
  MISC:  addr:0x33C0000 --length:0x080000
  LOGO:  addr:0x3440000 --length:0x300000
  EXPDB:  addr:0x3740000 --length:0xA00000
  ANDROID:  addr:0x4140000 --length:0x35200000
  CACHE:  addr:0x39340000 --length:0x17800000
  USRDATA:  addr:0x50B40000 --length:0x81700000
  FAT:  addr:0xD2240000 --length:0xFB1E0000
  BMTPOOL:  addr:0xFFFF00A8 --length:0x1500000

Info from scatter file from back up:

############################################################################################################
#
#  General Setting
#  
############################################################################################################
- general: MTK_PLATFORM_CFG
  info: 
    - config_version: V1.1.1
      platform: MT6572
      project: C808
      storage: EMMC
      boot_channel: MSDC_0
      block_size: 0x40000
############################################################################################################
#
#  Layout Setting
#  
############################################################################################################
- partition_index: SYS0
  partition_name: PRELOADER
  file_name: preloader
  is_download: true
  type: SV5_BL_BIN
  linear_start_addr: 0x0
  physical_start_addr: 0x0
  partition_size: 0xA00000
  region: EMMC_BOOT_1
  storage: HW_STORAGE_EMMC
  boundary_check: true
  is_reserved: false
  operation_type: BOOTLOADERS
  reserve: 0x0
  
- partition_index: SYS1
  partition_name: MBR
  file_name: MBR
  is_download: true
  type: NORMAL_ROM
  linear_start_addr: 0x1400000
  physical_start_addr: 0x0
  partition_size: 0x80000
  region: EMMC_USER
  storage: HW_STORAGE_EMMC
  boundary_check: true
  is_reserved: false
  operation_type: UPDATE
  reserve: 0x0
  
- partition_index: SYS2
  partition_name: EBR1
  file_name: EBR1
  is_download: true
  type: NORMAL_ROM
  linear_start_addr: 0x1480000
  physical_start_addr: 0x0
  partition_size: 0x80000
  region: EMMC_USER
  storage: HW_STORAGE_EMMC
  boundary_check: true
  is_reserved: false
  operation_type: UPDATE
  reserve: 0x0
  
- partition_index: SYS3
  partition_name: PRO_INFO
  file_name: PRO_INFO
  is_download: false
  type: NONE
  linear_start_addr: 0x1500000
  physical_start_addr: 0x0
  partition_size: 0x300000
  region: EMMC_USER
  storage: HW_STORAGE_EMMC
  boundary_check: true
  is_reserved: false
  operation_type: PROTECTED
  reserve: 0x0
  
- partition_index: SYS4
  partition_name: NVRAM
  file_name: nvram
  is_download: false
  type: NONE
  linear_start_addr: 0x1800000
  physical_start_addr: 0x0
  partition_size: 0x500000
  region: EMMC_USER
  storage: HW_STORAGE_EMMC
  boundary_check: true
  is_reserved: false
  operation_type: BINREGION
  reserve: 0x0
  
- partition_index: SYS5
  partition_name: _PROTECT_F
  file_name: protect_f
  is_download: false
  type: NONE
  linear_start_addr: 0x1D00000
  physical_start_addr: 0x0
  partition_size: 0xA00000
  region: NONE
  storage: 
  boundary_check: false
  is_reserved: false
  operation_type: 
  reserve: 0x0
  
- partition_index: SYS6
  partition_name: _PROTECT_S
  file_name: protect_s
  is_download: false
  type: NONE
  linear_start_addr: 0x2700000
  physical_start_addr: 0x0
  partition_size: 0xA00000
  region: NONE
  storage: 
  boundary_check: false
  is_reserved: false
  operation_type: 
  reserve: 0x0
  
- partition_index: SYS7
  partition_name: SECCFG
  file_name: seccfg
  is_download: false
  type: NONE
  linear_start_addr: 0x3100000
  physical_start_addr: 0x0
  partition_size: 0x20000
  region: EMMC_USER
  storage: HW_STORAGE_EMMC
  boundary_check: true
  is_reserved: false
  operation_type: INVISIBLE
  reserve: 0x0
  
- partition_index: SYS8
  partition_name: UBOOT
  file_name: uboot
  is_download: true
  type: NORMAL_ROM
  linear_start_addr: 0x3120000
  physical_start_addr: 0x0
  partition_size: 0x60000
  region: EMMC_USER
  storage: HW_STORAGE_EMMC
  boundary_check: true
  is_reserved: false
  operation_type: UPDATE
  reserve: 0x0
  
- partition_index: SYS9
  partition_name: BOOTIMG
  file_name: boot
  is_download: true
  type: NORMAL_ROM
  linear_start_addr: 0x3180000
  physical_start_addr: 0x0
  partition_size: 0x600000
  region: EMMC_USER
  storage: HW_STORAGE_EMMC
  boundary_check: true
  is_reserved: false
  operation_type: UPDATE
  reserve: 0x0
  
- partition_index: SYS10
  partition_name: RECOVERY
  file_name: recovery
  is_download: true
  type: NORMAL_ROM
  linear_start_addr: 0x3780000
  physical_start_addr: 0x0
  partition_size: 0x600000
  region: EMMC_USER
  storage: HW_STORAGE_EMMC
  boundary_check: true
  is_reserved: false
  operation_type: UPDATE
  reserve: 0x0
  
- partition_index: SYS11
  partition_name: SEC_RO
  file_name: secro
  is_download: true
  type: NORMAL_ROM
  linear_start_addr: 0x3D80000
  physical_start_addr: 0x0
  partition_size: 0x40000
  region: EMMC_USER
  storage: HW_STORAGE_EMMC
  boundary_check: true
  is_reserved: false
  operation_type: UPDATE
  reserve: 0x0
  
- partition_index: SYS12
  partition_name: MISC
  file_name: misc
  is_download: false
  type: NONE
  linear_start_addr: 0x3DC0000
  physical_start_addr: 0x0
  partition_size: 0x80000
  region: EMMC_USER
  storage: HW_STORAGE_EMMC
  boundary_check: true
  is_reserved: false
  operation_type: INVISIBLE
  reserve: 0x0
  
- partition_index: SYS13
  partition_name: LOGO
  file_name: logo
  is_download: true
  type: NORMAL_ROM
  linear_start_addr: 0x3E40000
  physical_start_addr: 0x0
  partition_size: 0x300000
  region: EMMC_USER
  storage: HW_STORAGE_EMMC
  boundary_check: true
  is_reserved: false
  operation_type: UPDATE
  reserve: 0x0
  
- partition_index: SYS14
  partition_name: EXPDB
  file_name: expdb
  is_download: false
  type: NONE
  linear_start_addr: 0x4140000
  physical_start_addr: 0x0
  partition_size: 0xA00000
  region: EMMC_USER
  storage: HW_STORAGE_EMMC
  boundary_check: true
  is_reserved: false
  operation_type: INVISIBLE
  reserve: 0x0
  
- partition_index: SYS15
  partition_name: ANDROID
  file_name: system
  is_download: true
  type: YAFFS_IMG
  linear_start_addr: 0x4B40000
  physical_start_addr: 0x0
  partition_size: 0x35200000
  region: EMMC_USER
  storage: HW_STORAGE_EMMC
  boundary_check: true
  is_reserved: false
  operation_type: UPDATE
  reserve: 0x0
  
- partition_index: SYS16
  partition_name: CACHE
  file_name: cache
  is_download: true
  type: YAFFS_IMG
  linear_start_addr: 0x39D40000
  physical_start_addr: 0x0
  partition_size: 0x17800000
  region: EMMC_USER
  storage: HW_STORAGE_EMMC
  boundary_check: true
  is_reserved: false
  operation_type: UPDATE
  reserve: 0x0
  
- partition_index: SYS17
  partition_name: USRDATA
  file_name: userdata
  is_download: true
  type: YAFFS_IMG
  linear_start_addr: 0x51540000
  physical_start_addr: 0x0
  partition_size: 0x81700000
  region: EMMC_USER
  storage: HW_STORAGE_EMMC
  boundary_check: true
  is_reserved: false
  operation_type: UPDATE
  reserve: 0x0
  
- partition_index: SYS18
  partition_name: FAT
  file_name: fat
  is_download: false
  type: NONE
  linear_start_addr: 0xD2C40000
  physical_start_addr: 0x0
  partition_size: 0xFFFFFFFFFB1E0000
  region: NONE
  storage: 
  boundary_check: false
  is_reserved: false
  operation_type: 
  reserve: 0x0
  
- partition_index: SYS19
  partition_name: BMTPOOL
  file_name: bmtpool
  is_download: false
  type: NONE
  linear_start_addr: 0xCD420000
  physical_start_addr: 0x0
  partition_size: 0x1500000
  region: EMMC_USER
  storage: HW_STORAGE_EMMC
  boundary_check: false
  is_reserved: true
  operation_type: RESERVED
  reserve: 0x0

I made two comparisons only ( partition_name:Android adress and partition_name: EXPDB

You can see the difference

Solution

Just edit the
linear_start_addr for each partition in scatter file text .. Save the changes and you are done and you can safely flash the backup.
Replace the address from the info you first read instead of the linear_start_addr in Scatter file. and thats it.

You have to load files normally because scatter file will never load them.

I hope this will help someone.

[dulamgaza]

hi will i install my white volcano box help plz because its telling me volcno box not connected/connect to server

[sadikahmed]

I am lost My Merapi Toll User Id And Password So plz Sugges what Do

Sent from my SM-G7102 using Tapatalk

[AniAxn]

Originally Posted by sadikahmed

I am lost My Merapi Toll User Id And Password So plz Sugges what Do

Sent from my SM-G7102 using Tapatalk

Hello,
We have already a thread for this issue ..
Post here with your box s/n on this thread ..

http://forum.gsmhosting.com/vbb/f723...-here-1960047/

Wbr,
AniAXN

[sadikahmed]

thanks its working

Sent from my SM-G7102 using Tapatalk

[johnnystrong]

HOW to remove "Privacy protection password" to alcatel OT 4013D

first do read info

read and save flash

after do unlock theft

after format phone reboot without privacy protection




here phone after unlock