Qmobile I5 Dead Issue - GSM-Forum

_Ari3s_ · 09-09-2016, 16:24

Hello All team....
I Have write factory file on qmobile i5 and phone working fine but now another qmobile i5 i write file but set is dead and when i write from merapi then it say that Connect error: Handset's baseband chip is unknown type. Please check DA and BROM DLL are on the same version.
Error connect phone, aborting.

ij_cell · 09-09-2016, 16:33

Use INFERNO tool flash again and post error screenshot which you are facing

What is cause to flash this phone.....?

_Ari3s_ · 09-09-2016, 17:02

Quote:

Originally Posted by ij_cell

Use INFERNO tool flash again and post error screenshot which you are facing

What is cause to flash this phone.....?

Thank You IJ_Cell For your kind replay for me....
now i flash with inferno but same phone is in dead mood....

Code:

>>
>>Operation:
          1. Power off the phone.
          2. Please insert USB cable within 20 seconds.
>> 
>>Connecting...
>>CPU TYPE:MT6582
>>Hardware version:CB00
>>Software version:0001
>>SecCfgVal :0x00000000
>>BromVersion :0xFF
>>BLVersion :0x01
>>Boot downloading complete!
>>EMMC_ID:0x11010030303447393051918BD3F06151
>>EMMC_PRODUCT_NAME: 0x303034473930
>>EMMC_BOOT1_SIZE: 0x00200000
>>EMMC_BOOT2_SIZE: 0x00200000
>>EMMC_PRMB_SIZE: 0x00080000
>>EMMC_GP1_SIZE: 0x00000000
>>EMMC_GP2_SIZE: 0x00000000
>>EMMC_GP3_SIZE: 0x00000000
>>EMMC_GP4_SIZE: 0x00000000
>>EMMC_USER_SIZE: 0x0EC000000(3.69 G)
>> 
>>Detected : MediaTek USB Port (COM8)
>>Find partition success.
>>Orignal preloader backup path:C:\Inferno_Volcano_MTK\backup\preloader_s4700_20160909_205724.bin
>>Flash writing complete.

ij_cell · 09-09-2016, 17:14

Quote:

Originally Posted by _Ari3s_

Thank You IJ_Cell For your kind replay for me....
now i flash with inferno but same phone is in dead mood....

Code:

>>
>>Operation:
          1. Power off the phone.
          2. Please insert USB cable within 20 seconds.
>> 
>>Connecting...
>>CPU TYPE:MT6582
>>Hardware version:CB00
>>Software version:0001
>>SecCfgVal :0x00000000
>>BromVersion :0xFF
>>BLVersion :0x01
>>Boot downloading complete!
>>EMMC_ID:0x11010030303447393051918BD3F06151
>>EMMC_PRODUCT_NAME: 0x303034473930
>>EMMC_BOOT1_SIZE: 0x00200000
>>EMMC_BOOT2_SIZE: 0x00200000
>>EMMC_PRMB_SIZE: 0x00080000
>>EMMC_GP1_SIZE: 0x00000000
>>EMMC_GP2_SIZE: 0x00000000
>>EMMC_GP3_SIZE: 0x00000000
>>EMMC_GP4_SIZE: 0x00000000
>>EMMC_USER_SIZE: 0x0EC000000(3.69 G)
>> 
>>Detected : MediaTek USB Port (COM8)
>>Find partition success.
>>Orignal preloader backup path:C:\Inferno_Volcano_MTK\backup\preloader_s4700_20160909_205724.bin
>>Flash writing complete.

Make sure this phone don't have other firmware variant if flash is done than its enough for recover any device from software state..

GOOD LUCK

_Ari3s_ · 09-09-2016, 17:15

Quote:

Originally Posted by ij_cell

Use INFERNO tool flash again and post error screenshot which you are facing

What is cause to flash this phone.....?

phone have some application issue when any application open phone goes on home screen.... touch is also fine....

_Ari3s_ · 09-09-2016, 17:18

Quote:

Originally Posted by ij_cell

Make sure this phone don't have other firmware variant if flash is done than its enough for recover any device from software state..

GOOD LUCK

brother phone was in working condition and also on this file i also done 1 phone before write on this....

ij_cell · 09-09-2016, 17:28

Quote:

Originally Posted by _Ari3s_

brother phone was in working condition and also on this file i also done 1 phone before write on this....

Do one thing.
Load your scatter file>>>manually select ORIGINAL PRELOADER file of this phone which was on backup during first flash and flash phone,Post result

_Ari3s_ · 09-09-2016, 18:32

Quote:

Originally Posted by ij_cell

Do one thing.
Load your scatter file>>>manually select ORIGINAL PRELOADER file of this phone which was on backup during first flash and flash phone,Post result

Thanks bro for your kind time, problem solved by writing bin file with volcano utility.....

zoneofash · 09-10-2016, 03:28

Quote:

Originally Posted by _Ari3s_

Thanks bro for your kind time, problem solved by writing bin file with volcano utility.....

You can Write BIN Flash with Inferno too , But Your Missing Something on Read / Write FAC . Anyhow Your Problem Now Solved

09-09-2016, 16:24	#1 (permalink)
_Ari3s_ Freak Poster Join Date: Nov 2012 Posts: 154 Member: 1842399 Status: Offline Thanks Meter: 21	Qmobile I5 Dead Issue Hello All team.... I Have write factory file on qmobile i5 and phone working fine but now another qmobile i5 i write file but set is dead and when i write from merapi then it say that Connect error: Handset's baseband chip is unknown type. Please check DA and BROM DLL are on the same version. Error connect phone, aborting.

09-09-2016, 16:33	#2 (permalink)
ij_cell No Life Poster Join Date: May 2013 Location: TkinterPy,Hex Cal,Ext2,Ext4, Posts: 4,540 Member: 1937038 Status: Offline Sonork: QQ 2045657399 Thanks Meter: 4,492	Use INFERNO tool flash again and post error screenshot which you are facing What is cause to flash this phone.....?