qmobile preloader problem, need help. - GSM-Forum

ch mobiles · 02-03-2016, 10:07

hello,

i flashed qmobile x90 v2 with wrong flash file.after flash set was bricked,i soldered kolo with grnd.now when i am flashing with merapi tool i am facing this issue

Code:

13:49:57 > Merapi Updated: 2016-01-27 13:49:57 > Connecting... 13:49:59 > Connection successful,connected state! 13:49:59 > Version: V3.8 13:49:59 > SN: ******** 13:50:01 > Connecting to server... 13:50:06 > Connecting to server...OK! 13:50:06 > Getting function information from server... 13:50:07 > Getting function information from server...OK! 13:51:31 > Access to functional permissions from server... 13:51:32 > Access to functional permissions from server...OK! 13:51:33 > 13:51:33 > 13:51:33 > >>Analysis of USB port,Please insert phone USB cable. 13:51:37 > Connecting... 13:51:37 > CPU TYPE:MT6572 13:51:37 > Hardware version:CA01 13:51:37 > Software version:0000 13:51:37 > SecCfgVal :0x00000000 13:51:37 > BromVersion :0x05 13:51:37 > BLVersion :0xFE >>Boot downloading complete!

pls help me thnx

Best regards.

waheed-ashraf · 02-03-2016, 10:22

did you tried with battery inside or without battery??

ch mobiles · 02-03-2016, 10:24

I tried with both methods ,with battery and without battery. but every time stuck at boot download complete.

B,R.

ch mobiles · 02-03-2016, 10:55

waiting for reply.plz help me team,thnx.

B,R.

Faheem Anjum · 02-03-2016, 11:00

There is 3 firmwares for V2 Which you one have and which one inside before flashing any idea ?

arsikhanarsi · 02-03-2016, 11:11

remove soldering from kcolo and GND etc.
assemble your phone,download same firmware.
first flash only preloader file then flash whole firmware.

ch mobiles · 02-03-2016, 11:40

Quote:

Originally Posted by Faheem Anjum

There is 3 firmwares for V2 Which you one have and which one inside before flashing any idea ?

faheem bhai,i changed different firmwares,also read from working phones,but not luck.
always stuck at boot download complete even read info read flash and giving error in start with sp flash tool.

B,R.

ch mobiles · 02-03-2016, 12:04

Quote:

Originally Posted by arsikhanarsi

remove soldering from kcolo and GND etc.
assemble your phone,download same firmware.
first flash only preloader file then flash whole firmware.

after remove soldering does not connect with computer

b,r.

ch mobiles · 02-03-2016, 13:10

with android mtk of merapi tool
show boot info as

Action : Boot Info.
Selected Acer:Liquid Z110
Phone must be off with battery inside.
Please insert USB cable now...
Detected : MediaTek USB Port (COM47)
Phone detected...Please wait
Sending DA agent, please wait...
Connect error: An error occurs might be the following reasons:
1. There does not exist the MTK_ROM_INFO structure in the ROM;
2. There does not exist the MTK_BLOADER_INFO structure in the boot-loader;
3. It is not NFB-booting;

All done.

linux_sh · 02-03-2016, 14:22

Quote:

Originally Posted by ch mobiles

with android mtk of merapi tool
show boot info as

Action : Boot Info.
Selected Acer:Liquid Z110
Phone must be off with battery inside.
Please insert USB cable now...
Detected : MediaTek USB Port (COM47)
Phone detected...Please wait
Sending DA agent, please wait...
Connect error: An error occurs might be the following reasons:
1. There does not exist the MTK_ROM_INFO structure in the ROM;
2. There does not exist the MTK_BLOADER_INFO structure in the boot-loader;
3. It is not NFB-booting;

All done.

mr dear1- volcono tools open 3.09

2- andorid tools open

3 - scater file selct

4 - then flash with battey / ac dc supply conct mobile

same condiction but my problem solve micromax a106

mohd.asim · 02-03-2016, 17:04

What errors comes with sp tool

amn32 · 02-03-2016, 17:04

Quote:

Originally Posted by ch mobiles

with android mtk of merapi tool
show boot info as

Action : Boot Info.
Selected Acer:Liquid Z110
Phone must be off with battery inside.
Please insert USB cable now...
Detected : MediaTek USB Port (COM47)
Phone detected...Please wait
Sending DA agent, please wait...
Connect error: An error occurs might be the following reasons:
1. There does not exist the MTK_ROM_INFO structure in the ROM;
2. There does not exist the MTK_BLOADER_INFO structure in the boot-loader;
3. It is not NFB-booting;

All done.

Preloader is erased , first make jumper on test points , do format full by volcano , open merapi android tool ,select scatter,tick on write preloader , untick on format before flash ,untick checksum, write full ff ,after write complete ,remove test point and power on phone.

saimch · 05-05-2016, 15:49

weher is kolo point can you send me picture i cant find

amn32 · 05-06-2016, 06:44

Quote:

Originally Posted by saimch

weher is kolo point can you send me picture i cant find

Do you think we have every model in our hands ?
Open your phone , see on board , sure there will be written , kolo , kcolo or colo etc ,make jumper on it to the gnd point .

02-03-2016, 10:22	#2 (permalink)
waheed-ashraf Junior Member Join Date: Feb 2016 Posts: 7 Member: 2525955 Status: Offline Thanks Meter: 0	did you tried with battery inside or without battery??

02-03-2016, 10:24	#3 (permalink)
ch mobiles No Life Poster Join Date: Apr 2008 Location: Pakistan Age: 36 Posts: 2,134 Member: 748029 Status: Offline Sonork: 100.1603742 Thanks Meter: 1,822	I tried with both methods ,with battery and without battery. but every time stuck at boot download complete. B,R.

02-03-2016, 10:55	#4 (permalink)
ch mobiles No Life Poster Join Date: Apr 2008 Location: Pakistan Age: 36 Posts: 2,134 Member: 748029 Status: Offline Sonork: 100.1603742 Thanks Meter: 1,822	waiting for reply.plz help me team,thnx. B,R.

02-03-2016, 11:00	#5 (permalink)
Faheem Anjum No Life Poster Join Date: Nov 2006 Location: (United States Of Islam) Age: 37 Posts: 24,984 Member: 399832 Status: Offline Sonork: Faheem Anjum Thanks Meter: 24,310	There is 3 firmwares for V2 Which you one have and which one inside before flashing any idea ?

02-03-2016, 11:11	#6 (permalink)
arsikhanarsi Freak Poster Join Date: Jan 2015 Location: manshera,Pakistan Posts: 231 Member: 2330556 Status: Offline Thanks Meter: 79	remove soldering from kcolo and GND etc. assemble your phone,download same firmware. first flash only preloader file then flash whole firmware.

02-03-2016, 13:10	#9 (permalink)
ch mobiles No Life Poster Join Date: Apr 2008 Location: Pakistan Age: 36 Posts: 2,134 Member: 748029 Status: Offline Sonork: 100.1603742 Thanks Meter: 1,822	with android mtk of merapi tool show boot info as Action : Boot Info. Selected Acer:Liquid Z110 Phone must be off with battery inside. Please insert USB cable now... Detected : MediaTek USB Port (COM47) Phone detected...Please wait Sending DA agent, please wait... Connect error: An error occurs might be the following reasons: 1. There does not exist the MTK_ROM_INFO structure in the ROM; 2. There does not exist the MTK_BLOADER_INFO structure in the boot-loader; 3. It is not NFB-booting; All done.

02-03-2016, 17:04	#11 (permalink)
mohd.asim Freak Poster Join Date: Apr 2009 Location: india Posts: 373 Member: 1019173 Status: Offline Sonork: crown mobile Thanks Meter: 37	What errors comes with sp tool

05-05-2016, 15:49	#13 (permalink)
saimch Registered User Join Date: Apr 2015 Location: South Africa Posts: 36 Member: 2379745 Status: Offline Sonork: 1671416:SAIM MOBILEs Thanks Meter: 3	weher is kolo point can you send me picture i cant find